Skip to content
maunawai.info

Drinking water in Garmisch-Partenkirchen

2 supply zones — values can differ depending on the district. Below is the zone with the most documented parameters, the others collapsed underneath. To determine the exact match, look up the postcode.

How to read the share of the parametric value

12 % Share of the parametric value. The proportion of the permitted maximum that the measured value uses — here 12 %, so just over an eighth.
< 10 % * Below the limit of quantification. The substance was not detectable. The mark shows where the detection limit lies relative to the parametric value — the actual share of the parametric value is below that.

Several samples per year: for chemical parameters the mean value is given, for microbiological ones the highest measured value. There the parametric value is zero — a single finding would disappear in the average, and it is precisely that finding which is the information. Which reference applies is stated in the last column of the table.

Ga.-Pa., Burgrain, Kaltenbrunn und Gem. Farchant

Gemeindewerke Garmisch-Partenkirchen

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

Water hardness
8.5 °dH
Hardness range weich
Key values Ga.-Pa., Burgrain, Kaltenbrunn und Gem. Farchant
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 1,9 mg/L 50 mg/l
4 %
Single value · Ga.-Pa., Burgrain, Kaltenbrunn und Gem. Farchant
Lead < 0,0020 mg/L
below limit of quantification
10 µg/l
< 20 % *
Single value · Ga.-Pa., Burgrain, Kaltenbrunn und Gem. Farchant
Sulphate 10,2 mg/L 250 mg/l
4 %
Single value · Ga.-Pa., Burgrain, Kaltenbrunn und Gem. Farchant
Sodium 1,3 mg/L 200 mg/l
0.7 %
Single value · Ga.-Pa., Burgrain, Kaltenbrunn und Gem. Farchant

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Show all recorded parameters (40 — most recent value per parameter)

Chemical parameters (18)

Chemical parameters – Ga.-Pa., Burgrain, Kaltenbrunn und Gem. Farchant
Parameter Value Parametric value Share of the parametric value Reference
Antimony < 0,0010 mg/L
below limit of quantification
5 µg/l
< 20 % *
Single value · Ga.-Pa., Burgrain, Kaltenbrunn und Gem. Farchant
Arsenic < 0,0010 mg/L
below limit of quantification
10 µg/l
< 10 % *
Single value · Ga.-Pa., Burgrain, Kaltenbrunn und Gem. Farchant
Benzene < 0,25 µg/L
below limit of quantification
1 µg/l
< 25 % *
Single value · Ga.-Pa., Burgrain, Kaltenbrunn und Gem. Farchant
Benzo(a)pyrene < 0,0025 µg/L
below limit of quantification
10 ng/l
< 25 % *
Single value · Ga.-Pa., Burgrain, Kaltenbrunn und Gem. Farchant
Boron 0,012 mg/L 1 mg/l
1 %
Single value · Ga.-Pa., Burgrain, Kaltenbrunn und Gem. Farchant
Bromate <0,0025 mg/L
below limit of quantification
10 µg/l
< 25 % *
Single value · Ga.-Pa., Burgrain, Kaltenbrunn und Gem. Farchant
Cadmium < 0,0005 mg/L
below limit of quantification
3 µg/l
< 17 % *
Single value · Ga.-Pa., Burgrain, Kaltenbrunn und Gem. Farchant
Chromium < 0,0005 mg/L
below limit of quantification
25 µg/l
< 2 % *
Single value · Ga.-Pa., Burgrain, Kaltenbrunn und Gem. Farchant
Copper <0,0050 mg/L
below limit of quantification
2 mg/l
< 0.3 % *
Single value · Ga.-Pa., Burgrain, Kaltenbrunn und Gem. Farchant
Cyanide < 0,005 mg/L
below limit of quantification
50 µg/l
< 10 % *
Single value · Ga.-Pa., Burgrain, Kaltenbrunn und Gem. Farchant
Lead < 0,0020 mg/L
below limit of quantification
10 µg/l
< 20 % *
Single value · Ga.-Pa., Burgrain, Kaltenbrunn und Gem. Farchant
Mercury < 0,0010 mg/L
below limit of quantification
1 µg/l
< 100 % *
Single value · Ga.-Pa., Burgrain, Kaltenbrunn und Gem. Farchant
Nickel < 0,0050 mg/L
below limit of quantification
20 µg/l
< 25 % *
Single value · Ga.-Pa., Burgrain, Kaltenbrunn und Gem. Farchant
Nitrate 1,9 mg/L 50 mg/l
4 %
Single value · Ga.-Pa., Burgrain, Kaltenbrunn und Gem. Farchant
Nitrite < 0,01 mg/L
below limit of quantification
0.5 mg/l
< 2 % *
Single value · Ga.-Pa., Burgrain, Kaltenbrunn und Gem. Farchant
Selenium < 0,0010 mg/L
below limit of quantification
10 µg/l
< 10 % *
Single value · Ga.-Pa., Burgrain, Kaltenbrunn und Gem. Farchant
Trihalomethanes — Total nicht nachweisbar mg/L
not detectable
50 µg/l Single value · Ga.-Pa., Burgrain, Kaltenbrunn und Gem. Farchant
Vinyl chloride <0,25 µg/L
below limit of quantification
0.5 µg/l
< 50 % *
Single value · Ga.-Pa., Burgrain, Kaltenbrunn und Gem. Farchant

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Indicator parameters (11)

Indicator parameters – Ga.-Pa., Burgrain, Kaltenbrunn und Gem. Farchant
Parameter Value Parametric value Share of the parametric value Reference
Ammonium 0,02 mg/L 0.5 mg/l
4 %
Single value · Ga.-Pa., Burgrain, Kaltenbrunn und Gem. Farchant
Chloride 0,5 mg/L 250 mg/l
0.2 %
Single value · Ga.-Pa., Burgrain, Kaltenbrunn und Gem. Farchant
Colony count 22 °C 0 KBE/100mL ohne anormale Veränderung Single value · Ga.-Pa., Burgrain, Kaltenbrunn und Gem. Farchant
Colony count 36 °C 0 KBE/100mL ohne anormale Veränderung Single value · Ga.-Pa., Burgrain, Kaltenbrunn und Gem. Farchant
Iron < 0,010 mg/L
below limit of quantification
0.2 mg/l
< 5 % *
Single value · Ga.-Pa., Burgrain, Kaltenbrunn und Gem. Farchant
Manganese < 0,005 mg/L
below limit of quantification
50 µg/l
< 10 % *
Single value · Ga.-Pa., Burgrain, Kaltenbrunn und Gem. Farchant
pH 7,83 - 6,5–9,5 Single value · Ga.-Pa., Burgrain, Kaltenbrunn und Gem. Farchant
Sodium 1,3 mg/L 200 mg/l
0.7 %
Single value · Ga.-Pa., Burgrain, Kaltenbrunn und Gem. Farchant
Sulphate 10,2 mg/L 250 mg/l
4 %
Single value · Ga.-Pa., Burgrain, Kaltenbrunn und Gem. Farchant
Temperature 10,5 °C Single value · Ga.-Pa., Burgrain, Kaltenbrunn und Gem. Farchant
Turbidity 0,22 NTU 1 NTU Single value · Ga.-Pa., Burgrain, Kaltenbrunn und Gem. Farchant

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Further parameters (11)

Further parameters – Ga.-Pa., Burgrain, Kaltenbrunn und Gem. Farchant
Parameter Value Parametric value Share of the parametric value Reference
Acid capacity to pH 4.3 2,73 mmol/L Single value · Ga.-Pa., Burgrain, Kaltenbrunn und Gem. Farchant
Base capacity to pH 8.2 0,06 mmol/L Single value · Ga.-Pa., Burgrain, Kaltenbrunn und Gem. Farchant
Calcium 44,2 mg/L Single value · Ga.-Pa., Burgrain, Kaltenbrunn und Gem. Farchant
Carbonate hardness 7,6 °dH Single value · Ga.-Pa., Burgrain, Kaltenbrunn und Gem. Farchant
Free carbon dioxide 2,6 mg/L Single value · Ga.-Pa., Burgrain, Kaltenbrunn und Gem. Farchant
Hardness range (WRMG) weich - Single value · Ga.-Pa., Burgrain, Kaltenbrunn und Gem. Farchant
Magnesium 10,5 mg/L Single value · Ga.-Pa., Burgrain, Kaltenbrunn und Gem. Farchant
Oxygen 9,8 mg/L Single value · Ga.-Pa., Burgrain, Kaltenbrunn und Gem. Farchant
Potassium < 0,5 mg/L
below limit of quantification
Single value · Ga.-Pa., Burgrain, Kaltenbrunn und Gem. Farchant
Saturation index 0,05 - Single value · Ga.-Pa., Burgrain, Kaltenbrunn und Gem. Farchant
Total hardness 1,52 mmol/L Single value · Ga.-Pa., Burgrain, Kaltenbrunn und Gem. Farchant

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Source: https://www.gw-gap.de/images/stories/wasser/analyse_trinkwasser_kundeninfo_internet.pdf · 25.06.2026 · 12.05.2026 · retrieved on 08/07/2026

Postcodes in this zone: 82467 , 82475

Show 1 more supply zone

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

Water hardness
12.9 °dH
Hardness range mittel
Key values Griesen
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 3,0 mg/L 50 mg/l
6 %
Single value · Griesen
Lead 0,0020 mg/L 10 µg/l
20 %
Single value · Griesen
Sulphate 15,5 mg/L 250 mg/l
6 %
Single value · Griesen
Sodium 7,9 mg/L 200 mg/l
4 %
Single value · Griesen
Show all recorded parameters (40 — most recent value per parameter)

Chemical parameters (18)

Chemical parameters – Griesen
Parameter Value Parametric value Share of the parametric value Reference
Antimony < 0,0010 mg/L
below limit of quantification
5 µg/l
< 20 % *
Single value · Griesen
Arsenic < 0,0010 mg/L
below limit of quantification
10 µg/l
< 10 % *
Single value · Griesen
Benzene < 0,25 µg/L
below limit of quantification
1 µg/l
< 25 % *
Single value · Griesen
Benzo(a)pyrene < 0,0025 µg/L
below limit of quantification
10 ng/l
< 25 % *
Single value · Griesen
Boron 0,009 mg/L 1 mg/l
0.9 %
Single value · Griesen
Bromate <0,0025 mg/L
below limit of quantification
10 µg/l
< 25 % *
Single value · Griesen
Cadmium < 0,0005 mg/L
below limit of quantification
3 µg/l
< 17 % *
Single value · Griesen
Chromium <0,0005 mg/L
below limit of quantification
25 µg/l
< 2 % *
Single value · Griesen
Copper 0,0068 mg/L 2 mg/l
0.3 %
Single value · Griesen
Cyanide < 0,005 mg/L
below limit of quantification
50 µg/l
< 10 % *
Single value · Griesen
Lead 0,0020 mg/L 10 µg/l
20 %
Single value · Griesen
Mercury < 0,0001 mg/L
below limit of quantification
1 µg/l
< 10 % *
Single value · Griesen
Nickel < 0,0050 mg/L
below limit of quantification
20 µg/l
< 25 % *
Single value · Griesen
Nitrate 3,0 mg/L 50 mg/l
6 %
Single value · Griesen
Nitrite < 0,01 mg/L
below limit of quantification
0.5 mg/l
< 2 % *
Single value · Griesen
Selenium < 0,0010 mg/L
below limit of quantification
10 µg/l
< 10 % *
Single value · Griesen
Trihalomethanes — Total nicht nachweisbar mg/L
not detectable
50 µg/l Single value · Griesen
Vinyl chloride <0,25 µg/L
below limit of quantification
0.5 µg/l
< 50 % *
Single value · Griesen

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Indicator parameters (11)

Indicator parameters – Griesen
Parameter Value Parametric value Share of the parametric value Reference
Ammonium 0,02 mg/L 0.5 mg/l
4 %
Single value · Griesen
Chloride 11,6 mg/L 250 mg/l
5 %
Single value · Griesen
Colony count 22 °C 0 KBE/100mL ohne anormale Veränderung Single value · Griesen
Colony count 36 °C 0 KBE/100mL ohne anormale Veränderung Single value · Griesen
Iron < 0,010 mg/L
below limit of quantification
0.2 mg/l
< 5 % *
Single value · Griesen
Manganese < 0,005 mg/L
below limit of quantification
50 µg/l
< 10 % *
Single value · Griesen
pH 7,65 - 6,5–9,5 Single value · Griesen
Sodium 7,9 mg/L 200 mg/l
4 %
Single value · Griesen
Sulphate 15,5 mg/L 250 mg/l
6 %
Single value · Griesen
Temperature 6,4 °C Single value · Griesen
Turbidity 0,06 NTU 1 NTU Single value · Griesen

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Further parameters (11)

Further parameters – Griesen
Parameter Value Parametric value Share of the parametric value Reference
Acid capacity to pH 4.3 3,85 mmol/L Single value · Griesen
Base capacity to pH 8.2 0,24 mmol/L Single value · Griesen
Calcium 63,7 mg/L Single value · Griesen
Carbonate hardness 10,8 °dH Single value · Griesen
Free carbon dioxide 10,6 mg/L Single value · Griesen
Hardness range (WRMG) mittel - Single value · Griesen
Magnesium 16,2 mg/L Single value · Griesen
Oxygen 9,2 mg/L Single value · Griesen
Potassium 0,5 mg/L Single value · Griesen
Saturation index 0,08 - Single value · Griesen
Total hardness 2,30 mmol/L Single value · Griesen

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Source: https://www.gw-gap.de/images/stories/wasser/analyse_trinkwasser_kundeninfo_internet.pdf · 25.06.2026 · 12.05.2026 · retrieved on 08/07/2026

Postcodes in this zone: 82467 , 82475

Frequently asked questions about drinking water in Garmisch-Partenkirchen

How hard is the water in Garmisch-Partenkirchen?
Gemeindewerke Garmisch-Partenkirchen publishes a total hardness of 1,52 mmol/L for the supply zone Ga.-Pa., Burgrain, Kaltenbrunn und Gem. Farchant — that corresponds to 8.5 °dH. The hardness range is a classification under the German Detergents and Cleaning Products Act (soft below 8,4 °dH, medium 8,4 to 14 °dH, hard above that) and not a quality verdict — it indicates how much calcium and magnesium is dissolved in the water. Basis: 25.06.2026, retrieved on 08/07/2026.
How much nitrate is in the drinking water in Garmisch-Partenkirchen?
Gemeindewerke Garmisch-Partenkirchen publishes a nitrate value of 1,9 mg/L for the supply zone Ga.-Pa., Burgrain, Kaltenbrunn und Gem. Farchant. The statutory parametric value is 50 mg/l; the measured value represents 4 % of the parametric value. Basis: 25.06.2026, retrieved on 08/07/2026.
Who supplies the drinking water in Garmisch-Partenkirchen?
Gemeindewerke Garmisch-Partenkirchen. The values shown here come from the supply zone Ga.-Pa., Burgrain, Kaltenbrunn und Gem. Farchant and apply to the water the supplier delivers. What happens between the building connection and the tap — in old lead pipes, for example — is not covered by these analyses; information on that is provided by owners, the health authority or an examination by an accredited laboratory.

General questions — how current the data is, limit of quantification, parametric values, who is behind this site — are answered under Questions & answers.