Drinking water in Fränkisch-Crumbach
One supply zone, water supplier: Fränkisch-Crumbach.
How to read the share of the parametric value
12 % Share of the parametric value. The proportion of the permitted maximum that the measured value uses — here 12 %, so just over an eighth.
< 10 % * Below the limit of quantification. The substance was not detectable. The mark shows where the detection limit lies relative to the parametric value — the actual share of the parametric value is below that.
Several samples per year: for chemical parameters the mean value is given, for microbiological ones the highest measured value. There the parametric value is zero — a single finding would disappear in the average, and it is precisely that finding which is the information. Which reference applies is stated in the last column of the table.
wp-fraenkisch-crumbach gesamt
Fränkisch-CrumbachAssigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.
These values are more than a year old. The most recent analysis the water supplier has published for this zone dates from 22/05/2018. We have no newer values — which is why we show the latest available ones rather than none at all. They say nothing about how the water has changed since then.
Water hardness
14 °dH
Hardness range hard
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Nitrate | 17 mg/l | 50 mg/l | 34 % | Single value |
| Lead | 0.003 mg/l | 10 µg/l | 30 % | Single value |
| Escherichia coli (E. coli) | 0 KBE/100 ml | 0/100 ml | — | Single value |
| Sulphate | 26 mg/l | 250 mg/l | 10 % | Single value |
| Sodium | 9 mg/l | 200 mg/l | 5 % | Single value |
Show all recorded parameters (53 — most recent value per parameter)
Microbiology (2)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Escherichia coli (E. coli) | 0 KBE/100 ml | 0/100 ml | — | Single value |
| Intestinal enterococci | 0 KBE/100 ml | 0/100 ml | — | Single value |
Chemical parameters (23)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| 1,2-dichloroethane | 0.0005 mg/l | 3 µg/l | 17 % | Single value |
| Antimony | 0.001 mg/l | 5 µg/l | 20 % | Single value |
| Arsenic | 0.001 mg/l | 10 µg/l | 10 % | Single value |
| Benzene | 0.0003 mg/l | 1 µg/l | 30 % | Single value |
| Benzo(a)pyrene | 3e-06 mg/l | 10 ng/l | 30 % | Single value |
| Boron | 0.15 mg/l | 1 mg/l | 15 % | Single value |
| Bromate | 0.003 mg/l | 10 µg/l | 30 % | Single value |
| Cadmium | 0.0003 mg/l | 3 µg/l | 10 % | Single value |
| Chromium | 0.0005 mg/l | 25 µg/l | 2 % | Single value |
| Copper | 0.01 mg/l | 2 mg/l | 0.5 % | Single value |
| Cyanide | 0.005 mg/l | 50 µg/l | 10 % | Single value |
| Fluoride | 0.1 mg/l | 1.5 mg/l | 7 % | Single value |
| Lead | 0.003 mg/l | 10 µg/l | 30 % | Single value |
| Mercury | 0.0003 mg/l | 1 µg/l | 30 % | Single value |
| Nickel | 0.003 mg/l | 20 µg/l | 15 % | Single value |
| Nitrate | 17 mg/l | 50 mg/l | 34 % | Single value |
| Nitrite | 0.01 mg/l | 0.5 mg/l | 2 % | Single value |
| Polycyclic aromatic hydrocarbons | 3e-05 mg/l | 0.1 µg/l | 30 % | Single value |
| Selenium | 0.001 mg/l | 10 µg/l | 10 % | Single value |
| Tetrachloroethene | 0.0005 mg/l | — | — | Single value |
| Trichloroethene | 0.0005 mg/l | — | — | Single value |
| Trihalomethanes — Total | 0.0005 mg/l | 50 µg/l | 1 % | Single value |
| Uranium | 0.001 mg/l | 10 µg/l | 10 % | Single value |
Indicator parameters (21)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Aluminium | 0.01 mg/l | 0.2 mg/l | 5 % | Single value |
| Ammonium | 0.05 mg/l | 0.5 mg/l | 10 % | Single value |
| Calcite dissolution capacity | -9 mg/l | 5 mg/l CaCO3 | — | Single value |
| Chloride | 28 mg/l | 250 mg/l | 11 % | Single value |
| Coliform bacteria | 0 KBE/100 ml | 0/100 ml | — | Single value |
| Colony count 22 °C | 0 KBE/ml | ohne anormale Veränderung | — | Single value |
| Colony count 36 °C | 0 KBE/ml | ohne anormale Veränderung | — | Single value |
| Colour | farblos 1/m | 0.5 m⁻¹ | — | Single value |
| Conductivity (25 °C) | 545 µS/cm | 2,790 µS/cm | — | Single value |
| Iron | 0.03 mg/l | 0.2 mg/l | 15 % | Single value |
| Manganese | 0.01 mg/l | 50 µg/l | 20 % | Single value |
| Odour | ohne | für den Verbraucher annehmbar | — | Single value |
| Oxidisability | 0.2 mg/l | 5 mg/l O2 | — | Single value |
| pH | 7.58 | 6,5–9,5 | — | Single value |
| Sodium | 9 mg/l | 200 mg/l | 5 % | Single value |
| Sulphate | 26 mg/l | 250 mg/l | 10 % | Single value |
| Taste | ohne | für den Verbraucher annehmbar | — | Single value |
| Temperature | 12.1 °C | — | — | Single value |
| Threshold odour number (TON) | 1 | — | — | Single value |
| Total organic carbon (TOC) | 0.6 mg/l | ohne anormale Veränderung | — | Single value |
| Turbidity | 0.1 TE/F | 1 NTU | — | Single value |
Further parameters (7)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Acid capacity to pH 4.3 | 3.85 mmol/l | — | — | Single value |
| Base capacity to pH 8.2 | 0.25 mmol/l | — | — | Single value |
| Calcium | 82 mg/l | — | — | Single value |
| Carbonate hardness | 10.8 °dH | — | — | Single value |
| Magnesium | 12 mg/l | — | — | Single value |
| Potassium | 1 mg/l | — | — | Single value |
| Total hardness | 2.5 mmol/l | — | — | Single value |
Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.
Source: https://oeffentlichkeit.gw-manager.com/gebiete/0224709c-aa09-4246-88f6-4086e3723da2 · 2018-05-22 · 2018-05-22 · retrieved on 27/07/2026
Postcodes in this zone: 64407
Frequently asked questions about drinking water in Fränkisch-Crumbach
- How hard is the water in Fränkisch-Crumbach?
- Fränkisch-Crumbach publishes a total hardness of 2.5 mmol/l for the supply zone wp-fraenkisch-crumbach gesamt — that corresponds to 14 °dH. The hardness range is a classification under the German Detergents and Cleaning Products Act (soft below 8,4 °dH, medium 8,4 to 14 °dH, hard above that) and not a quality verdict — it indicates how much calcium and magnesium is dissolved in the water. Basis: 2018-05-22, retrieved on 27/07/2026.
- How much nitrate is in the drinking water in Fränkisch-Crumbach?
- Fränkisch-Crumbach publishes a nitrate value of 17 mg/l for the supply zone wp-fraenkisch-crumbach gesamt. The statutory parametric value is 50 mg/l; the measured value represents 34 % of the parametric value. Basis: 2018-05-22, retrieved on 27/07/2026.
- Who supplies the drinking water in Fränkisch-Crumbach?
- Fränkisch-Crumbach. The values shown here come from the supply zone wp-fraenkisch-crumbach gesamt and apply to the water the supplier delivers. What happens between the building connection and the tap — in old lead pipes, for example — is not covered by these analyses; information on that is provided by owners, the health authority or an examination by an accredited laboratory.
General questions — how current the data is, limit of quantification, parametric values, who is behind this site — are answered under Questions & answers.