How hard is the water in Fislisbach?

Fislisbach publishes a total hardness of 33.5 °fH for the supply zone Gemeinde Fislisbach — that corresponds to 18.8 °dH. The hardness range is a classification under the German Detergents and Cleaning Products Act (soft below 8,4 °dH, medium 8,4 to 14 °dH, hard above that) and not a quality verdict — it indicates how much calcium and magnesium is dissolved in the water. Basis: 2024, retrieved on 07/08/2026.

How much nitrate is in the drinking water in Fislisbach?

Fislisbach publishes a nitrate value of 23 mg/l for the supply zone Gemeinde Fislisbach. The statutory parametric value is 40 mg/l; the measured value represents 57 % of the parametric value. Basis: 2024, retrieved on 07/08/2026.

Who supplies the drinking water in Fislisbach?

Fislisbach. The values shown here come from the supply zone Gemeinde Fislisbach and apply to the water the supplier delivers. What happens between the building connection and the tap — in old lead pipes, for example — is not covered by these analyses; information on that is provided by owners, the health authority or an examination by an accredited laboratory.

Drinking water in Fislisbach

One supply zone, water supplier: Fislisbach.

How to read the share of the parametric value

12 % Share of the parametric value. The proportion of the permitted maximum that the measured value uses — here 12 %, so just over an eighth.

< 10 % * Below the limit of quantification. The substance was not detectable. The mark shows where the detection limit lies relative to the parametric value — the actual share of the parametric value is below that.

Several samples per year: for chemical parameters the mean value is given, for microbiological ones the highest measured value. There the parametric value is zero — a single finding would disappear in the average, and it is precisely that finding which is the information. Which reference applies is stated in the last column of the table.

Gemeinde Fislisbach

Fislisbach

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

These values are more than a year old. The most recent analysis the water supplier has published for this zone dates from 31/12/2024. We have no newer values — which is why we show the latest available ones rather than none at all. They say nothing about how the water has changed since then.

Water hardness

18.8 °dH

Hardness range hard

Key values Gemeinde Fislisbach
Parameter	Value	Parametric value	Share of the parametric value	Reference
Nitrate	23 mg/l	40 mg/l	57 %	Mean · Gemeinde Fislisbach
Escherichia coli (E. coli)	nn not detectable Unit not stated in the document	0/100 ml	—	Maximum · Median nn · Gemeinde Fislisbach
Sulphate	13 mg/l	—	—	Mean · Gemeinde Fislisbach
Sodium	5.3 mg/l	200 mg/l	3 %	Mean · Gemeinde Fislisbach

Show all recorded parameters (18 — most recent value per parameter)

Microbiology (3)

Microbiology – Gemeinde Fislisbach
Parameter	Value	Parametric value	Share of the parametric value	Reference
Aerobic mesophilic bacteria	4 KBE/ml	300 1/ml	—	Mean · Gemeinde Fislisbach
Escherichia coli (E. coli)	nn not detectable Unit not stated in the document	0/100 ml	—	Maximum · Median nn · Gemeinde Fislisbach
Intestinal enterococci	nn not detectable Unit not stated in the document	0/100 ml	—	Maximum · Median nn · Gemeinde Fislisbach

Chemical parameters (1)

Chemical parameters – Gemeinde Fislisbach
Parameter	Value	Parametric value	Share of the parametric value	Reference
Nitrate	23 mg/l	40 mg/l	57 %	Mean · Gemeinde Fislisbach

Metabolites (2)

Metabolites – Gemeinde Fislisbach
Parameter	Value	Parametric value	Share of the parametric value	Reference
Chlorothalonil metabolite R417888	0.027 µg/l	0.1 µg/l	27 %	Mean · Gemeinde Fislisbach
Chlorothalonil metabolite R471811	0.077 µg/l	0.1 µg/l	77 %	Mean · Gemeinde Fislisbach

Indicator parameters (7)

Indicator parameters – Gemeinde Fislisbach
Parameter	Value	Parametric value	Share of the parametric value	Reference
Chloride	5.8 mg/l	—	—	Mean · Gemeinde Fislisbach
Conductivity (25 °C)	618 µS/cm	—	—	Mean · Gemeinde Fislisbach
pH	7.2	—	—	Mean · Gemeinde Fislisbach
Sodium	5.3 mg/l	200 mg/l	3 %	Mean · Gemeinde Fislisbach
Sulphate	13 mg/l	—	—	Mean · Gemeinde Fislisbach
Temperature	12 °C	—	—	Mean · Gemeinde Fislisbach
Turbidity	0.1 TE/F	—	—	Mean · Gemeinde Fislisbach

Further parameters (5)

Further parameters – Gemeinde Fislisbach
Parameter	Value	Parametric value	Share of the parametric value	Reference
Calcium	110 mg/l	—	—	Mean · Gemeinde Fislisbach
Dissolved organic carbon (DOC)	0.25 mg/l	—	—	Mean · Gemeinde Fislisbach
Magnesium	14.4 mg/l	—	—	Mean · Gemeinde Fislisbach
Potassium	0.8 mg/l	—	—	Mean · Gemeinde Fislisbach
Total hardness	33.5 °fH	—	—	Mean · Gemeinde Fislisbach

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Source: https://trinkwasser.ch/de/versorger/1221/fislisbach/1471/gemeinde-fislisbach · 2024 · 2024 · retrieved on 07/08/2026

Postcodes in this zone: 5442

Frequently asked questions about drinking water in Fislisbach

How hard is the water in Fislisbach?: Fislisbach publishes a total hardness of 33.5 °fH for the supply zone Gemeinde Fislisbach — that corresponds to 18.8 °dH. The hardness range is a classification under the German Detergents and Cleaning Products Act (soft below 8,4 °dH, medium 8,4 to 14 °dH, hard above that) and not a quality verdict — it indicates how much calcium and magnesium is dissolved in the water. Basis: 2024, retrieved on 07/08/2026.
How much nitrate is in the drinking water in Fislisbach?: Fislisbach publishes a nitrate value of 23 mg/l for the supply zone Gemeinde Fislisbach. The statutory parametric value is 40 mg/l; the measured value represents 57 % of the parametric value. Basis: 2024, retrieved on 07/08/2026.
Who supplies the drinking water in Fislisbach?: Fislisbach. The values shown here come from the supply zone Gemeinde Fislisbach and apply to the water the supplier delivers. What happens between the building connection and the tap — in old lead pipes, for example — is not covered by these analyses; information on that is provided by owners, the health authority or an examination by an accredited laboratory.

General questions — how current the data is, limit of quantification, parametric values, who is behind this site — are answered under Questions & answers.