Skip to content
maunawai.info

Drinking water in Ettlingen

One supply zone, water supplier: Stadtwerke Ettlingen GmbH.

How to read the share of the parametric value

12 % Share of the parametric value. The proportion of the permitted maximum that the measured value uses — here 12 %, so just over an eighth.
< 10 % * Below the limit of quantification. The substance was not detectable. The mark shows where the detection limit lies relative to the parametric value — the actual share of the parametric value is below that.

Several samples per year: for chemical parameters the mean value is given, for microbiological ones the highest measured value. There the parametric value is zero — a single finding would disappear in the average, and it is precisely that finding which is the information. Which reference applies is stated in the last column of the table.

Kernstadt und alle Stadtteile

Stadtwerke Ettlingen GmbH

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

Water hardness
17.3 °dH
Hardness range hart
Key values Kernstadt und alle Stadtteile
Parameter Value Parametric value Share of the parametric value Reference
Sum of PFAS 0,00 μg/L 0.1 µg/l
0 %
Single value · Kernstadt und alle Stadtteile
Nitrate 2,00
Unit not stated in the document
50 mg/l Single value · Kernstadt und alle Stadtteile
Sulphate 38,70
Unit not stated in the document
250 mg/l Single value · Kernstadt und alle Stadtteile
Sodium 9,30
Unit not stated in the document
200 mg/l Single value · Kernstadt und alle Stadtteile
Show all recorded parameters (26 — most recent value per parameter)

Chemical parameters (3)

Chemical parameters – Kernstadt und alle Stadtteile
Parameter Value Parametric value Share of the parametric value Reference
Copper < BG
not detectable
Unit not stated in the document
2 mg/l Single value · Kernstadt und alle Stadtteile
Nitrate 2,00
Unit not stated in the document
50 mg/l Single value · Kernstadt und alle Stadtteile
Nitrite < BG
not detectable
Unit not stated in the document
0.5 mg/l Single value · Kernstadt und alle Stadtteile

PFAS (2)

PFAS – Kernstadt und alle Stadtteile
Parameter Value Parametric value Share of the parametric value Reference
Sum of 4 PFAS 0,00 μg/L Single value · Kernstadt und alle Stadtteile
Sum of PFAS 0,00 μg/L 0.1 µg/l
0 %
Single value · Kernstadt und alle Stadtteile

Indicator parameters (11)

Indicator parameters – Kernstadt und alle Stadtteile
Parameter Value Parametric value Share of the parametric value Reference
Aluminium < BG
not detectable
Unit not stated in the document
0.2 mg/l Single value · Kernstadt und alle Stadtteile
Ammonium < BG
not detectable
Unit not stated in the document
0.5 mg/l Single value · Kernstadt und alle Stadtteile
Chloride 16,20
Unit not stated in the document
250 mg/l Single value · Kernstadt und alle Stadtteile
Colour ohne - 0.5 m⁻¹ Single value · Kernstadt und alle Stadtteile
Conductivity (25 °C) 606,00 μS/cm 2,790 µS/cm Single value · Kernstadt und alle Stadtteile
Iron 0,03
Unit not stated in the document
0.2 mg/l Single value · Kernstadt und alle Stadtteile
Manganese < BG
not detectable
Unit not stated in the document
50 µg/l Single value · Kernstadt und alle Stadtteile
Odour ohne - für den Verbraucher annehmbar Single value · Kernstadt und alle Stadtteile
Sodium 9,30
Unit not stated in the document
200 mg/l Single value · Kernstadt und alle Stadtteile
Sulphate 38,70
Unit not stated in the document
250 mg/l Single value · Kernstadt und alle Stadtteile
Turbidity 0,17 FNU 1 NTU Single value · Kernstadt und alle Stadtteile

Further parameters (10)

Further parameters – Kernstadt und alle Stadtteile
Parameter Value Parametric value Share of the parametric value Reference
Acid capacity to pH 4.3 5,34 mmol/L Single value · Kernstadt und alle Stadtteile
Base capacity to pH 8.2 0,71 mmol/L Single value · Kernstadt und alle Stadtteile
Calcite precipitation capacity 15,00 mg/L Single value · Kernstadt und alle Stadtteile
Calcium 109,00 Single value · Kernstadt und alle Stadtteile
Hardness range (WRMG) hart Single value · Kernstadt und alle Stadtteile
Magnesium 9,00 Single value · Kernstadt und alle Stadtteile
Oxygen 6,80 mg/L Single value · Kernstadt und alle Stadtteile
Potassium 1,40 Single value · Kernstadt und alle Stadtteile
Saturation index 0,15 - Single value · Kernstadt und alle Stadtteile
Total hardness 17,30 ° dH Single value · Kernstadt und alle Stadtteile

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Postcodes in this zone: 76275

Frequently asked questions about drinking water in Ettlingen

How hard is the water in Ettlingen?
Stadtwerke Ettlingen GmbH publishes a total hardness of 17.3 °dH for the supply zone Kernstadt und alle Stadtteile (hardness range hart). The hardness range is a classification under the German Detergents and Cleaning Products Act (soft below 8,4 °dH, medium 8,4 to 14 °dH, hard above that) and not a quality verdict — it indicates how much calcium and magnesium is dissolved in the water. Basis: Publication by the water supplier, retrieved on 11/07/2026.
Are PFAS detectable in the drinking water in Ettlingen?
Stadtwerke Ettlingen GmbH publishes for the supply zone Kernstadt und alle Stadtteile a sum value PFAS-20 of 0,00 μg/L. The statutory parametric value is 0.1 µg/l; the measured value represents 0 % of the parametric value. For the sum of the 20 individual substances, this parametric value has applied since 12/01/2026. Basis: Publication by the water supplier, retrieved on 11/07/2026.
Who supplies the drinking water in Ettlingen?
Stadtwerke Ettlingen GmbH. The values shown here come from the supply zone Kernstadt und alle Stadtteile and apply to the water the supplier delivers. What happens between the building connection and the tap — in old lead pipes, for example — is not covered by these analyses; information on that is provided by owners, the health authority or an examination by an accredited laboratory.

General questions — how current the data is, limit of quantification, parametric values, who is behind this site — are answered under Questions & answers.