Skip to content
maunawai.info

Drinking water in Eschenlohe

One supply zone, water supplier: Stadtwerke München GmbH (SWM) / M-Wasser.

How to read the share of the parametric value

12 % Share of the parametric value. The proportion of the permitted maximum that the measured value uses — here 12 %, so just over an eighth.
< 10 % * Below the limit of quantification. The substance was not detectable. The mark shows where the detection limit lies relative to the parametric value — the actual share of the parametric value is below that.

Several samples per year: for chemical parameters the mean value is given, for microbiological ones the highest measured value. There the parametric value is zero — a single finding would disappear in the average, and it is precisely that finding which is the information. Which reference applies is stated in the last column of the table.

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

Key values gesamtes Stadtgebiet
Parameter Value Parametric value Share of the parametric value Reference
Sum of PFAS < 0,000030 mg/l
below limit of quantification
0.1 µg/l
< 30 % *
Mean
Nitrate 6,5 mg/l 50 mg/l
13 %
Mean
Lead < 0,001 mg/l
below limit of quantification
10 µg/l
< 10 % *
Mean
Escherichia coli (E. coli) 0
Unit not stated in the document
0/100 ml Maximum · Median 0
Sulphate 14,8 mg/l 250 mg/l
6 %
Mean
Sodium 5,9 mg/l 200 mg/l
3 %
Mean

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Show all recorded parameters (65 — most recent value per parameter)

Microbiology (2)

Microbiology – gesamtes Stadtgebiet
Parameter Value Parametric value Share of the parametric value Reference
Escherichia coli (E. coli) 0
Unit not stated in the document
0/100 ml Maximum · Median 0
Intestinal enterococci 0
Unit not stated in the document
0/100 ml Maximum · Median 0

Chemical parameters (26)

Chemical parameters – gesamtes Stadtgebiet
Parameter Value Parametric value Share of the parametric value Reference
1,2-dichloroethane < 0,0009 mg/l
below limit of quantification
3 µg/l
< 30 % *
Mean
Antimony < 0,0005 mg/l
below limit of quantification
5 µg/l
< 10 % *
Mean
Arsenic < 0,0004 mg/l
below limit of quantification
10 µg/l
< 4 % *
Mean
Benzene < 0,0003 mg/l
below limit of quantification
1 µg/l
< 30 % *
Mean
Benzo(a)pyrene < 0,0000025 mg/l
below limit of quantification
10 ng/l
< 25 % *
Mean
Bisphenol A < 0,0001 mg/l
below limit of quantification
2.5 µg/l
< 4 % *
Mean
Boron < 0,1 mg/l
below limit of quantification
1 mg/l
< 10 % *
Mean
Bromate < 0,0025 mg/l
below limit of quantification
10 µg/l
< 25 % *
Mean
Cadmium < 0,0003 mg/l
below limit of quantification
3 µg/l
< 10 % *
Mean
Chromium < 0,0005 mg/l
below limit of quantification
25 µg/l
< 2 % *
Mean
Copper < 0,20 mg/l
below limit of quantification
2 mg/l
< 10 % *
Mean
Cyanide < 0,005 mg/l
below limit of quantification
50 µg/l
< 10 % *
Mean
Epichlorohydrin < 0,00003 mg/l
below limit of quantification
0.1 µg/l
< 30 % *
Mean
Fluoride < 0,10 mg/l
below limit of quantification
1.5 mg/l
< 7 % *
Mean
Lead < 0,001 mg/l
below limit of quantification
10 µg/l
< 10 % *
Mean
Mercury < 0,0001 mg/l
below limit of quantification
1 µg/l
< 10 % *
Mean
Nickel < 0,002 mg/l
below limit of quantification
20 µg/l
< 10 % *
Mean
Nitrate 6,5 mg/l 50 mg/l
13 %
Mean
Nitrite < 0,05 mg/l
below limit of quantification
0.5 mg/l
< 10 % *
Mean
Pesticides < 0,000020 mg/l
below limit of quantification
0.1 µg/l
< 20 % *
Mean
Polycyclic aromatic hydrocarbons < 0,000005 mg/l
below limit of quantification
0.1 µg/l
< 5 % *
Mean
Selenium < 0,001 mg/l
below limit of quantification
10 µg/l
< 10 % *
Mean
Tetrachloroethene and Trichloroethene (sum) < 0,001 mg/l
below limit of quantification
10 µg/l
< 10 % *
Mean
Trihalomethanes — Total < 0,00100 mg/l
below limit of quantification
50 µg/l
< 2 % *
Mean
Uranium < 0,001 mg/l
below limit of quantification
10 µg/l
< 10 % *
Mean
Vinyl chloride < 0,00015 mg/l
below limit of quantification
0.5 µg/l
< 30 % *
Mean

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

PFAS (2)

PFAS – gesamtes Stadtgebiet
Parameter Value Parametric value Share of the parametric value Reference
Sum of 4 PFAS < 0,000005 mg/l
below limit of quantification
Mean
Sum of PFAS < 0,000030 mg/l
below limit of quantification
0.1 µg/l
< 30 % *
Mean

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Indicator parameters (20)

Indicator parameters – gesamtes Stadtgebiet
Parameter Value Parametric value Share of the parametric value Reference
Aluminium < 0,020 mg/l
below limit of quantification
0.2 mg/l
< 10 % *
Mean
Ammonium < 0,05 mg/l
below limit of quantification
0.5 mg/l
< 10 % *
Mean
Calcite dissolution capacity -18,7
Unit not stated in the document
5 mg/l CaCO3 Mean
Chloride 10,6 mg/l 250 mg/l
4 %
Mean
Coliform bacteria 0
Unit not stated in the document
0/100 ml Maximum · Median 0
Colony count 22 °C 0 ohne anormale Veränderung Mean
Colony count 36 °C 0 ohne anormale Veränderung Mean
Colour < 0,10
below limit of quantification
Unit not stated in the document
0.5 m⁻¹ Mean
Conductivity (25 °C) 554
Unit not stated in the document
2,790 µS/cm Mean
Iron < 0,020 mg/l
below limit of quantification
0.2 mg/l
< 10 % *
Mean
Manganese < 0,005 mg/l
below limit of quantification
50 µg/l
< 10 % *
Mean
Odour ohne für den Verbraucher annehmbar Mean
Oxidisability < 0,5
below limit of quantification
Unit not stated in the document
5 mg/l O2 Mean
pH 7,56 6,5–9,5 Mean
Sodium 5,9 mg/l 200 mg/l
3 %
Mean
Sulphate 14,8 mg/l 250 mg/l
6 %
Mean
Taste ohne für den Verbraucher annehmbar Mean
Temperature 10,3 Mean
Total organic carbon (TOC) < 0,30
below limit of quantification
ohne anormale Veränderung Mean
Turbidity < 0,20
below limit of quantification
Unit not stated in the document
1 NTU Mean

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Further parameters (15)

Further parameters – gesamtes Stadtgebiet
Parameter Value Parametric value Share of the parametric value Reference
Acid capacity to pH 4.3 5,5 Mean
Calcium 78,0 mg/l Mean
Carbonate hardness 15,3 Mean
Dissolved organic carbon (DOC) < 0,30
below limit of quantification
Mean
Free carbon dioxide 17,2 mg/l Mean
Hydrogen carbonate 0,5 mg/l Mean
Magnesium 20,9 mg/l Mean
Oxygen 10,0 mg/l Mean
Phosphate < 0,03 mg/l
below limit of quantification
Mean
Potassium 1,1 mg/l Mean
Silicate / silicic acid 4,5 mg/l Mean
Strontium 0,29 mg/l Mean
Sum of alkaline earth metals 2,8 Mean
Total hardness 15,8 Mean
Zinc < 0,20 mg/l
below limit of quantification
Mean

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Source: https://www.swm.de/dam/doc/wasser/trinkwasser-analysewerte.pdf · Januar 2026 · retrieved on 14/07/2026

Postcodes in this zone: 82438

Frequently asked questions about drinking water in Eschenlohe

How much nitrate is in the drinking water in Eschenlohe?
Stadtwerke München GmbH (SWM) / M-Wasser publishes a nitrate value of 6,5 mg/l for the supply zone gesamtes Stadtgebiet. The statutory parametric value is 50 mg/l; the measured value represents 13 % of the parametric value. Basis: Januar 2026, retrieved on 14/07/2026.
Are PFAS detectable in the drinking water in Eschenlohe?
Stadtwerke München GmbH (SWM) / M-Wasser publishes for the supply zone gesamtes Stadtgebiet a sum value PFAS-20 below the limit of quantification (entry in the report: "< 0,000030 mg/l"). This is not to be read as "PFAS-free": below the limit of quantification, the measurement cannot make any statement. The statutory parametric value is 0.1 µg/l; the measured value lies below it and cannot be specified more precisely below the limit of quantification. For the sum of the 20 individual substances, this parametric value has applied since 12/01/2026. Basis: Januar 2026, retrieved on 14/07/2026.
Who supplies the drinking water in Eschenlohe?
Stadtwerke München GmbH (SWM) / M-Wasser. The values shown here come from the supply zone gesamtes Stadtgebiet and apply to the water the supplier delivers. What happens between the building connection and the tap — in old lead pipes, for example — is not covered by these analyses; information on that is provided by owners, the health authority or an examination by an accredited laboratory.

General questions — how current the data is, limit of quantification, parametric values, who is behind this site — are answered under Questions & answers.