Skip to content
maunawai.info

Drinking water in Erxleben, Hillersleben, Ingersleben, Altenhausen, Beendorf Ackendf Bartenslbn Bebertal Bornstedt Bregenstedt Emden Groß Santerslbn Hakenstedt Hundisbg Ivenrode Nordgermerslbn Rottmerslbn Schackenslbn Schwanefd Süplingen Uhrsleben Beendf

2 supply zones — values can differ depending on the district. Below is the zone with the most documented parameters, the others collapsed underneath. To determine the exact match, look up the postcode.

How to read the share of the parametric value

12 % Share of the parametric value. The proportion of the permitted maximum that the measured value uses — here 12 %, so just over an eighth.
< 10 % * Below the limit of quantification. The substance was not detectable. The mark shows where the detection limit lies relative to the parametric value — the actual share of the parametric value is below that.

Several samples per year: for chemical parameters the mean value is given, for microbiological ones the highest measured value. There the parametric value is zero — a single finding would disappear in the average, and it is precisely that finding which is the information. Which reference applies is stated in the last column of the table.

WVG MW Haldensleben + Völpke

WVG MW Haldensleben + Völpke

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

These values are more than a year old. The most recent analysis the water supplier has published for this zone dates from 31/12/2023. We have no newer values — which is why we show the latest available ones rather than none at all. They say nothing about how the water has changed since then.

Key values WVG MW Haldensleben + Völpke
Parameter Value Parametric value Share of the parametric value Reference
Sulphate 61,795 mg/l 250 mg/l
25 %
Mean · WVG MW Haldensleben + Völpke
Sodium 26,9 mg/l 200 mg/l
13 %
Mean · WVG MW Haldensleben + Völpke
Show all recorded parameters (5 — most recent value per parameter)

Indicator parameters (5)

Indicator parameters – WVG MW Haldensleben + Völpke
Parameter Value Parametric value Share of the parametric value Reference
Ammonium 0,01 mg/l 0.5 mg/l
2 %
Mean · WVG MW Haldensleben + Völpke
Chloride 35,625 mg/l 250 mg/l
14 %
Mean · WVG MW Haldensleben + Völpke
Iron 0,044 mg/l 0.2 mg/l
22 %
Mean · WVG MW Haldensleben + Völpke
Sodium 26,9 mg/l 200 mg/l
13 %
Mean · WVG MW Haldensleben + Völpke
Sulphate 61,795 mg/l 250 mg/l
25 %
Mean · WVG MW Haldensleben + Völpke

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Source: https://lavst.azurewebsites.net/wasserkarte/gemeinden/15083323z.pdf · Jahresmittel 2023 · Jahresmittel 2023 · retrieved on 18/08/2026

Postcodes in this zone: 39343

Show 1 more supply zone

WVG WW Haldensleben

WVG WW Haldensleben

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

These values are more than a year old. The most recent analysis the water supplier has published for this zone dates from 31/12/2023. We have no newer values — which is why we show the latest available ones rather than none at all. They say nothing about how the water has changed since then.

Key values WVG WW Haldensleben
Parameter Value Parametric value Share of the parametric value Reference
Lead 0,001 mg/l 10 µg/l
10 %
Mean · WVG WW Haldensleben
Sulphate 59,74667 mg/l 250 mg/l
24 %
Mean · WVG WW Haldensleben
Sodium 22,82 mg/l 200 mg/l
11 %
Mean · WVG WW Haldensleben
Show all recorded parameters (10 — most recent value per parameter)

Chemical parameters (4)

Chemical parameters – WVG WW Haldensleben
Parameter Value Parametric value Share of the parametric value Reference
Chromium 0,0001 mg/l 25 µg/l
0.4 %
Mean · WVG WW Haldensleben
Copper 0,1936 mg/l 2 mg/l
10 %
Mean · WVG WW Haldensleben
Lead 0,001 mg/l 10 µg/l
10 %
Mean · WVG WW Haldensleben
Nickel 0,0016 mg/l 20 µg/l
8 %
Mean · WVG WW Haldensleben

Indicator parameters (6)

Indicator parameters – WVG WW Haldensleben
Parameter Value Parametric value Share of the parametric value Reference
Ammonium 0,01 mg/l 0.5 mg/l
2 %
Mean · WVG WW Haldensleben
Chloride 44,385 mg/l 250 mg/l
18 %
Mean · WVG WW Haldensleben
Iron 0,0428 mg/l 0.2 mg/l
21 %
Mean · WVG WW Haldensleben
Manganese 0,025 mg/l 50 µg/l
50 %
Mean · WVG WW Haldensleben
Sodium 22,82 mg/l 200 mg/l
11 %
Mean · WVG WW Haldensleben
Sulphate 59,74667 mg/l 250 mg/l
24 %
Mean · WVG WW Haldensleben

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Source: https://lavst.azurewebsites.net/wasserkarte/gemeinden/15083020z.pdf · Jahresmittel 2023 · Jahresmittel 2023 · retrieved on 18/08/2026

Postcodes in this zone: 39343

Frequently asked questions about drinking water in Erxleben, Hillersleben, Ingersleben, Altenhausen, Beendorf Ackendf Bartenslbn Bebertal Bornstedt Bregenstedt Emden Groß Santerslbn Hakenstedt Hundisbg Ivenrode Nordgermerslbn Rottmerslbn Schackenslbn Schwanefd Süplingen Uhrsleben Beendf

Who supplies the drinking water in Erxleben, Hillersleben, Ingersleben, Altenhausen, Beendorf Ackendf Bartenslbn Bebertal Bornstedt Bregenstedt Emden Groß Santerslbn Hakenstedt Hundisbg Ivenrode Nordgermerslbn Rottmerslbn Schackenslbn Schwanefd Süplingen Uhrsleben Beendf?
WVG MW Haldensleben + Völpke. The values shown here come from the supply zone WVG MW Haldensleben + Völpke and apply to the water the supplier delivers. What happens between the building connection and the tap — in old lead pipes, for example — is not covered by these analyses; information on that is provided by owners, the health authority or an examination by an accredited laboratory.

General questions — how current the data is, limit of quantification, parametric values, who is behind this site — are answered under Questions & answers.