Skip to content
maunawai.info

Drinking water in Emmen

One supply zone, water supplier: Einwohnergemeinde Emmen.

How to read the share of the parametric value

12 % Share of the parametric value. The proportion of the permitted maximum that the measured value uses — here 12 %, so just over an eighth.
< 10 % * Below the limit of quantification. The substance was not detectable. The mark shows where the detection limit lies relative to the parametric value — the actual share of the parametric value is below that.

Several samples per year: for chemical parameters the mean value is given, for microbiological ones the highest measured value. There the parametric value is zero — a single finding would disappear in the average, and it is precisely that finding which is the information. Which reference applies is stated in the last column of the table.

Emmen - Emmenbrücke

Einwohnergemeinde Emmen

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

Water hardness
8.9 °dH
Hardness range medium
Key values Emmen - Emmenbrücke
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 3.53 mg/l 40 mg/l
9 %
Mean · Emmen - Emmenbrücke
Escherichia coli (E. coli) 0 KBE/100ml 0/100 ml Maximum · Median 0 · Emmen - Emmenbrücke
Sulphate 13.75 mg/l Mean · Emmen - Emmenbrücke
Show all recorded parameters (13 — most recent value per parameter)

Microbiology (3)

Microbiology – Emmen - Emmenbrücke
Parameter Value Parametric value Share of the parametric value Reference
Aerobic mesophilic bacteria 3.4 KBE/ml 300 1/ml Mean · Emmen - Emmenbrücke
Escherichia coli (E. coli) 0 KBE/100ml 0/100 ml Maximum · Median 0 · Emmen - Emmenbrücke
Intestinal enterococci 0 KBE/100ml 0/100 ml Maximum · Median 0 · Emmen - Emmenbrücke

Chemical parameters (1)

Chemical parameters – Emmen - Emmenbrücke
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 3.53 mg/l 40 mg/l
9 %
Mean · Emmen - Emmenbrücke

Indicator parameters (6)

Indicator parameters – Emmen - Emmenbrücke
Parameter Value Parametric value Share of the parametric value Reference
Chloride 3.5 mg/l Mean · Emmen - Emmenbrücke
Conductivity (25 °C) 321.75 µS/cm Mean · Emmen - Emmenbrücke
Oxidisability 0.43 mg KMnO4/l Mean · Emmen - Emmenbrücke
Sulphate 13.75 mg/l Mean · Emmen - Emmenbrücke
Temperature 13.95 °C Mean · Emmen - Emmenbrücke
Turbidity 0.13 TE/F Mean · Emmen - Emmenbrücke

Further parameters (3)

Further parameters – Emmen - Emmenbrücke
Parameter Value Parametric value Share of the parametric value Reference
Calcium 56 mg/l Mean · Emmen - Emmenbrücke
Magnesium 4.88 mg/l Mean · Emmen - Emmenbrücke
Total hardness 15.98 °fH Mean · Emmen - Emmenbrücke

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Postcodes in this zone: 6032

Frequently asked questions about drinking water in Emmen

How hard is the water in Emmen?
Einwohnergemeinde Emmen publishes a total hardness of 15.98 °fH for the supply zone Emmen - Emmenbrücke — that corresponds to 8.9 °dH. The hardness range is a classification under the German Detergents and Cleaning Products Act (soft below 8,4 °dH, medium 8,4 to 14 °dH, hard above that) and not a quality verdict — it indicates how much calcium and magnesium is dissolved in the water. Basis: 2025, retrieved on 07/08/2026.
How much nitrate is in the drinking water in Emmen?
Einwohnergemeinde Emmen publishes a nitrate value of 3.53 mg/l for the supply zone Emmen - Emmenbrücke. The statutory parametric value is 40 mg/l; the measured value represents 9 % of the parametric value. Basis: 2025, retrieved on 07/08/2026.
Who supplies the drinking water in Emmen?
Einwohnergemeinde Emmen. The values shown here come from the supply zone Emmen - Emmenbrücke and apply to the water the supplier delivers. What happens between the building connection and the tap — in old lead pipes, for example — is not covered by these analyses; information on that is provided by owners, the health authority or an examination by an accredited laboratory.

General questions — how current the data is, limit of quantification, parametric values, who is behind this site — are answered under Questions & answers.