Skip to content
maunawai.info

Drinking water in Elbtal

6 supply zones — values can differ depending on the district. Below is the zone with the most documented parameters, the others collapsed underneath. To determine the exact match, look up the postcode.

How to read the share of the parametric value

12 % Share of the parametric value. The proportion of the permitted maximum that the measured value uses — here 12 %, so just over an eighth.
< 10 % * Below the limit of quantification. The substance was not detectable. The mark shows where the detection limit lies relative to the parametric value — the actual share of the parametric value is below that.

Several samples per year: for chemical parameters the mean value is given, for microbiological ones the highest measured value. There the parametric value is zero — a single finding would disappear in the average, and it is precisely that finding which is the information. Which reference applies is stated in the last column of the table.

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

No date is given for these values. The water supplier publishes the analysis without a sampling date and without a report date. When the water was examined is not apparent from the source — we do not add a date and we do not estimate one. What is stated is therefore only when we retrieved the document.

Water hardness
6.8 °dH
Hardness range Weich

No core values are available for this zone yet.

Show all recorded parameters (2 — most recent value per parameter)

Further parameters (2)

Further parameters – Dorchheim
Parameter Value Parametric value Share of the parametric value Reference
Hardness range (WRMG) Weich Single value · Dorchheim
Total hardness 6,8 °dH Single value · Dorchheim

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Source: https://www.gemeinde-elbtal.de/rathaus/wasserversorgung · retrieved on 18/08/2026

Postcodes in this zone: 65627

Show 5 more supply zones

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

No date is given for these values. The water supplier publishes the analysis without a sampling date and without a report date. When the water was examined is not apparent from the source — we do not add a date and we do not estimate one. What is stated is therefore only when we retrieved the document.

Water hardness
9.9 °dH
Hardness range Mittel

No core values are available for this zone yet.

Show all recorded parameters (2 — most recent value per parameter)

Further parameters (2)

Further parameters – Elbgrund
Parameter Value Parametric value Share of the parametric value Reference
Hardness range (WRMG) Mittel Single value · Elbgrund
Total hardness 9,9 °dH Single value · Elbgrund

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Source: https://www.gemeinde-elbtal.de/rathaus/wasserversorgung · retrieved on 18/08/2026

Postcodes in this zone: 65627

Hangenmeilingen Hochzone

Gemeinde Elbtal

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

No date is given for these values. The water supplier publishes the analysis without a sampling date and without a report date. When the water was examined is not apparent from the source — we do not add a date and we do not estimate one. What is stated is therefore only when we retrieved the document.

Water hardness
7.7 °dH
Hardness range Weich

No core values are available for this zone yet.

Show all recorded parameters (2 — most recent value per parameter)

Further parameters (2)

Further parameters – Hangenmeilingen Hochzone
Parameter Value Parametric value Share of the parametric value Reference
Hardness range (WRMG) Weich Single value · Hangenmeilingen Hochzone
Total hardness 7,7 °dH Single value · Hangenmeilingen Hochzone

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Source: https://www.gemeinde-elbtal.de/rathaus/wasserversorgung · retrieved on 18/08/2026

Postcodes in this zone: 65627

Hangenmeilingen Tiefzone

Gemeinde Elbtal

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

No date is given for these values. The water supplier publishes the analysis without a sampling date and without a report date. When the water was examined is not apparent from the source — we do not add a date and we do not estimate one. What is stated is therefore only when we retrieved the document.

Water hardness
7.8 °dH
Hardness range Weich

No core values are available for this zone yet.

Show all recorded parameters (2 — most recent value per parameter)

Further parameters (2)

Further parameters – Hangenmeilingen Tiefzone
Parameter Value Parametric value Share of the parametric value Reference
Hardness range (WRMG) Weich Single value · Hangenmeilingen Tiefzone
Total hardness 7,8 °dH Single value · Hangenmeilingen Tiefzone

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Source: https://www.gemeinde-elbtal.de/rathaus/wasserversorgung · retrieved on 18/08/2026

Postcodes in this zone: 65627

Heuchelheim Hochzone

Gemeinde Elbtal

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

No date is given for these values. The water supplier publishes the analysis without a sampling date and without a report date. When the water was examined is not apparent from the source — we do not add a date and we do not estimate one. What is stated is therefore only when we retrieved the document.

Water hardness
7.2 °dH
Hardness range Weich

No core values are available for this zone yet.

Show all recorded parameters (2 — most recent value per parameter)

Further parameters (2)

Further parameters – Heuchelheim Hochzone
Parameter Value Parametric value Share of the parametric value Reference
Hardness range (WRMG) Weich Single value · Heuchelheim Hochzone
Total hardness 7,2 °dH Single value · Heuchelheim Hochzone

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Source: https://www.gemeinde-elbtal.de/rathaus/wasserversorgung · retrieved on 18/08/2026

Postcodes in this zone: 65627

Heuchelheim Tiefzone

Gemeinde Elbtal

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

No date is given for these values. The water supplier publishes the analysis without a sampling date and without a report date. When the water was examined is not apparent from the source — we do not add a date and we do not estimate one. What is stated is therefore only when we retrieved the document.

Water hardness
8.6 °dH
Hardness range Mittel

No core values are available for this zone yet.

Show all recorded parameters (2 — most recent value per parameter)

Further parameters (2)

Further parameters – Heuchelheim Tiefzone
Parameter Value Parametric value Share of the parametric value Reference
Hardness range (WRMG) Mittel Single value · Heuchelheim Tiefzone
Total hardness 8,6 °dH Single value · Heuchelheim Tiefzone

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Source: https://www.gemeinde-elbtal.de/rathaus/wasserversorgung · retrieved on 18/08/2026

Postcodes in this zone: 65627

Frequently asked questions about drinking water in Elbtal

How hard is the water in Elbtal?
Gemeinde Elbtal publishes a total hardness of 6.8 °dH for the supply zone Dorchheim (hardness range Weich). The hardness range is a classification under the German Detergents and Cleaning Products Act (soft below 8,4 °dH, medium 8,4 to 14 °dH, hard above that) and not a quality verdict — it indicates how much calcium and magnesium is dissolved in the water. Basis: Publication by the water supplier, retrieved on 18/08/2026.
Who supplies the drinking water in Elbtal?
Gemeinde Elbtal. The values shown here come from the supply zone Dorchheim and apply to the water the supplier delivers. What happens between the building connection and the tap — in old lead pipes, for example — is not covered by these analyses; information on that is provided by owners, the health authority or an examination by an accredited laboratory.

General questions — how current the data is, limit of quantification, parametric values, who is behind this site — are answered under Questions & answers.