Skip to content
maunawai.info

Drinking water in Ebersbach-Musbach

2 supply zones — values can differ depending on the district. Below is the zone with the most documented parameters, the others collapsed underneath. To determine the exact match, look up the postcode.

How to read the share of the parametric value

12 % Share of the parametric value. The proportion of the permitted maximum that the measured value uses — here 12 %, so just over an eighth.
< 10 % * Below the limit of quantification. The substance was not detectable. The mark shows where the detection limit lies relative to the parametric value — the actual share of the parametric value is below that.

Several samples per year: for chemical parameters the mean value is given, for microbiological ones the highest measured value. There the parametric value is zero — a single finding would disappear in the average, and it is precisely that finding which is the information. Which reference applies is stated in the last column of the table.

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

These values are more than a year old. The most recent analysis the water supplier has published for this zone dates from 31/12/2022. We have no newer values — which is why we show the latest available ones rather than none at all. They say nothing about how the water has changed since then.

Key values Ebersbach
Parameter Value Parametric value Share of the parametric value Reference
Nitrate <0,5 mg/l
below limit of quantification
50 mg/l
< 1 % *
Single value
Lead <0,002 mg/l
below limit of quantification
10 µg/l
< 20 % *
Single value
Sulphate 23,1 mg/l 250 mg/l
9 %
Single value
Sodium 4,2 mg/l 200 mg/l
2 %
Single value

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Show all recorded parameters (49 — most recent value per parameter)

Chemical parameters (21)

Chemical parameters – Ebersbach
Parameter Value Parametric value Share of the parametric value Reference
Antimony <0,001 mg/l
below limit of quantification
5 µg/l
< 20 % *
Single value
Arsenic <0,0005 mg/l
below limit of quantification
10 µg/l
< 5 % *
Single value
Benzene <0,01 µg/l
below limit of quantification
1 µg/l
< 1 % *
Single value
Benzo(a)pyrene <0,001 µg/l
below limit of quantification
10 ng/l
< 10 % *
Single value
Boron <0,02 mg/l
below limit of quantification
1 mg/l
< 2 % *
Single value
Bromate n.b. mg/l
not determined
10 µg/l Single value
Cadmium <0,0002 mg/l
below limit of quantification
3 µg/l
< 7 % *
Single value
Chromium <0,0005 mg/l
below limit of quantification
25 µg/l
< 2 % *
Single value
Copper <0,04 mg/l
below limit of quantification
2 mg/l
< 2 % *
Single value
Cyanide <0,002 mg/l
below limit of quantification
50 µg/l
< 4 % *
Single value
Fluoride 0,07 mg/l 1.5 mg/l
5 %
Single value
Lead <0,002 mg/l
below limit of quantification
10 µg/l
< 20 % *
Single value
Mercury <0,0002 mg/l
below limit of quantification
1 µg/l
< 20 % *
Single value
Nickel <0,002 mg/l
below limit of quantification
20 µg/l
< 10 % *
Single value
Nitrate <0,5 mg/l
below limit of quantification
50 mg/l
< 1 % *
Single value
Nitrite <0,01 mg/l
below limit of quantification
0.5 mg/l
< 2 % *
Single value
Pesticides — Total n.n. µg/l
not detectable
0.5 µg/l Single value
Polycyclic aromatic hydrocarbons n.n. µg/l
not detectable
0.1 µg/l Single value
Selenium <0,001 mg/l
below limit of quantification
10 µg/l
< 10 % *
Single value
Trihalomethanes — Total n.n. µg/l
not detectable
50 µg/l Single value
Uranium 0,0010 mg/l 10 µg/l
10 %
Single value

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Indicator parameters (14)

Indicator parameters – Ebersbach
Parameter Value Parametric value Share of the parametric value Reference
Aluminium 0,031 mg/l 0.2 mg/l
16 %
Single value
Ammonium <0,01 mg/l
below limit of quantification
0.5 mg/l
< 2 % *
Single value
Calcite dissolution capacity -28 mg/l 5 mg/l CaCO3 Single value
Chloride 7,7 mg/l 250 mg/l
3 %
Single value
Colour <0,05 m-1
below limit of quantification
0.5 m⁻¹ Single value
Conductivity (25 °C) 601 µS/cm 2,790 µS/cm Single value
Iron <0,0058 mg/l
below limit of quantification
0.2 mg/l
< 3 % *
Single value
Manganese 0,003 mg/l 50 µg/l
6 %
Single value
pH 7,20 6,5–9,5 Single value
Sodium 4,2 mg/l 200 mg/l
2 %
Single value
Sulphate 23,1 mg/l 250 mg/l
9 %
Single value
Temperature 18,4 °C Single value
Total organic carbon (TOC) 0,54 mg/l ohne anormale Veränderung Single value
Turbidity 0,11 NTU 1 NTU Single value

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Further parameters (14)

Further parameters – Ebersbach
Parameter Value Parametric value Share of the parametric value Reference
Acid capacity to pH 4.3 6,04 mmol/l Single value
Base capacity to pH 8.2 0,47 mmol/l Single value
Calcium 83,1 mg/l Single value
Carbonate hardness 16,9 °dH Single value
Copper quotient 25,12 Single value
Free carbon dioxide 21 mg/l Single value
Hydrogen carbonate 368 mg/l Single value
Magnesium 26,1 mg/l Single value
Pitting corrosion quotient S1 0,12 Single value
Potassium 0,9 mg/l Single value
Spectral absorption coefficient 254 nm (SAC 254) 0,6 m-1 Single value
Sum of anion equivalents 6,74 mmol/l Single value
Sum of cation equivalents 6,53 mmol/l Single value
Trickling quotient 144,29 Single value

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Postcodes in this zone: 88371

Show 1 more supply zone

ebersbach-musbach gesamt

Wasserversorgung Ebersbach

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

These values are more than a year old. The most recent analysis the water supplier has published for this zone dates from 31/12/2024. We have no newer values — which is why we show the latest available ones rather than none at all. They say nothing about how the water has changed since then.

Water hardness
20.2 °dH
Hardness range hard
Key values ebersbach-musbach gesamt
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 22,4 mg/l 50 mg/l
45 %
Single value
Lead <0,002 mg/l
below limit of quantification
10 µg/l
< 20 % *
Single value
Sulphate 21,4 mg/l 250 mg/l
9 %
Single value
Sodium 6,0 mg/l 200 mg/l
3 %
Single value

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Show all recorded parameters (50 — most recent value per parameter)

Chemical parameters (21)

Chemical parameters – ebersbach-musbach gesamt
Parameter Value Parametric value Share of the parametric value Reference
Antimony <0,001 mg/l
below limit of quantification
5 µg/l
< 20 % *
Single value
Arsenic <0,0005 mg/l
below limit of quantification
10 µg/l
< 5 % *
Single value
Benzene <0,01 µg/l
below limit of quantification
1 µg/l
< 1 % *
Single value
Benzo(a)pyrene <0,001 µg/l
below limit of quantification
10 ng/l
< 10 % *
Single value
Boron <0,01 mg/l
below limit of quantification
1 mg/l
< 1 % *
Single value
Bromate n.b. mg/l
not determined
10 µg/l Single value
Cadmium <0,0002 mg/l
below limit of quantification
3 µg/l
< 7 % *
Single value
Chromium <0,0005 mg/l
below limit of quantification
25 µg/l
< 2 % *
Single value
Copper 0,003 mg/l 2 mg/l
0.2 %
Single value
Cyanide <0,002 mg/l
below limit of quantification
50 µg/l
< 4 % *
Single value
Fluoride 0,08 mg/l 1.5 mg/l
5 %
Single value
Lead <0,002 mg/l
below limit of quantification
10 µg/l
< 20 % *
Single value
Mercury <0,0002 mg/l
below limit of quantification
1 µg/l
< 20 % *
Single value
Nickel <0,002 mg/l
below limit of quantification
20 µg/l
< 10 % *
Single value
Nitrate 22,4 mg/l 50 mg/l
45 %
Single value
Nitrite <0,01 mg/l
below limit of quantification
0.5 mg/l
< 2 % *
Single value
Pesticides — Total n.n. µg/l
not detectable
0.5 µg/l Single value
Polycyclic aromatic hydrocarbons n.n. µg/l
not detectable
0.1 µg/l Single value
Selenium <0,001 mg/l
below limit of quantification
10 µg/l
< 10 % *
Single value
Trihalomethanes — Total n.n. µg/l
not detectable
50 µg/l Single value
Uranium 0,0023 mg/l 10 µg/l
23 %
Single value

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Indicator parameters (14)

Indicator parameters – ebersbach-musbach gesamt
Parameter Value Parametric value Share of the parametric value Reference
Aluminium <0,005 mg/l
below limit of quantification
0.2 mg/l
< 3 % *
Single value
Ammonium <0,01 mg/l
below limit of quantification
0.5 mg/l
< 2 % *
Single value
Calcite dissolution capacity -34 mg/l 5 mg/l CaCO3 Single value
Chloride 15,3 mg/l 250 mg/l
6 %
Single value
Colour <0,05 m-1
below limit of quantification
0.5 m⁻¹ Single value
Conductivity (25 °C) 679 µS/cm 2,790 µS/cm Single value
Iron <0,005 mg/l
below limit of quantification
0.2 mg/l
< 3 % *
Single value
Manganese <0,002 mg/l
below limit of quantification
50 µg/l
< 4 % *
Single value
pH 7,12 6,5–9,5 Single value
Sodium 6,0 mg/l 200 mg/l
3 %
Single value
Sulphate 21,4 mg/l 250 mg/l
9 %
Single value
Temperature 17,4 °C Single value
Total organic carbon (TOC) 0,77 mg/l ohne anormale Veränderung Single value
Turbidity 0,08 NTU 1 NTU Single value

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Further parameters (15)

Further parameters – ebersbach-musbach gesamt
Parameter Value Parametric value Share of the parametric value Reference
Acid capacity to pH 4.3 6,33 mmol/l Single value
Base capacity to pH 8.2 0,65 mmol/l Single value
Calcium 104 mg/l Single value
Carbonate hardness 17,7 °dH Single value
Copper quotient 28,41 Single value
Free carbon dioxide 28,7 mg/l Single value
Hydrogen carbonate 386 mg/l Single value
Magnesium 23,8 mg/l Single value
Pitting corrosion quotient S1 0,20 Single value
Potassium 1,0 mg/l Single value
Spectral absorption coefficient 254 nm (SAC 254) 0,8 m-1 Single value
Sum of anion equivalents 7,57 mmol/l Single value
Sum of cation equivalents 7,43 mmol/l Single value
Total hardness 3,6 mmol/l Single value
Trickling quotient 2,43 Single value

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Postcodes in this zone: 88371

Frequently asked questions about drinking water in Ebersbach-Musbach

How much nitrate is in the drinking water in Ebersbach-Musbach?
Wasserversorgung Ebersbach publishes a nitrate value of <0,5 mg/l for the supply zone Ebersbach. The statutory parametric value is 50 mg/l; the measured value lies below it and cannot be specified more precisely below the limit of quantification. Basis: Publication by the water supplier, retrieved on 08/08/2026.
Who supplies the drinking water in Ebersbach-Musbach?
Wasserversorgung Ebersbach. The values shown here come from the supply zone Ebersbach and apply to the water the supplier delivers. What happens between the building connection and the tap — in old lead pipes, for example — is not covered by these analyses; information on that is provided by owners, the health authority or an examination by an accredited laboratory.

General questions — how current the data is, limit of quantification, parametric values, who is behind this site — are answered under Questions & answers.