Skip to content
maunawai.info

Drinking water in Eberndorf, Globasnitz

One supply zone, water supplier: WG Gemeindeamt Globasnitz.

How to read the share of the parametric value

12 % Share of the parametric value. The proportion of the permitted maximum that the measured value uses — here 12 %, so just over an eighth.
< 10 % * Below the limit of quantification. The substance was not detectable. The mark shows where the detection limit lies relative to the parametric value — the actual share of the parametric value is below that.

Several samples per year: for chemical parameters the mean value is given, for microbiological ones the highest measured value. There the parametric value is zero — a single finding would disappear in the average, and it is precisely that finding which is the information. Which reference applies is stated in the last column of the table.

at-globasnitz gesamt

WG Gemeindeamt Globasnitz

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

Water hardness
9.1 °dH
Hardness range medium
Key values at-globasnitz gesamt
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 3,14 mg/l 50 mg/l
6 %
Single value
Sulphate 6,3 mg/l 250 mg/l
3 %
Single value
Sodium <0,5 mg/l
below limit of quantification
200 mg/l
< 0.3 % *
Single value

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Show all recorded parameters (17 — most recent value per parameter)

Chemical parameters (3)

Chemical parameters – at-globasnitz gesamt
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 3,14 mg/l 50 mg/l
6 %
Single value
Nitrate/50 + Nitrite/3 0,066 mg/l Single value
Nitrite <0,01 mg/l
below limit of quantification
0.1 mg/l
< 10 % *
Single value

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Indicator parameters (7)

Indicator parameters – at-globasnitz gesamt
Parameter Value Parametric value Share of the parametric value Reference
Ammonium 0,026 mg/l 0.5 mg/l
5 %
Single value
Chloride <1 mg/l
below limit of quantification
200 mg/l
< 0.5 % *
Single value
Iron <0,01 mg/l
below limit of quantification
0.2 mg/l
< 5 % *
Single value
Manganese <0,005 mg/l
below limit of quantification
50 µg/l
< 10 % *
Single value
Oxidisability 0,33 mg O2/l 5 mg/l Single value
Sodium <0,5 mg/l
below limit of quantification
200 mg/l
< 0.3 % *
Single value
Sulphate 6,3 mg/l 250 mg/l
3 %
Single value

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Further parameters (7)

Further parameters – at-globasnitz gesamt
Parameter Value Parametric value Share of the parametric value Reference
Acid capacity to pH 4.3 3,16 mmol/l Single value
Calcium 45,6 mg/l 400 mg/l
11 %
Single value
Carbonate hardness 8,71 °dH Single value
Hydrogen carbonate 190 mg/l Single value
Magnesium 11,9 mg/l 150 mg/l
8 %
Single value
Potassium <0,5 mg/l
below limit of quantification
50 mg/l
< 1 % *
Single value
Total hardness 1,63 mmol/l Single value

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Source: https://www.globasnitz.at/wp-content/uploads/2026/07/SKM_C550i26070710500.pdf · 30.06.2026 · Beginn der Prüfung: 24.06.2026, Ende der Prüfungen: 30.06.2026 · retrieved on 11/08/2026

Postcodes in this zone: 9141

Frequently asked questions about drinking water in Eberndorf, Globasnitz

How hard is the water in Eberndorf, Globasnitz?
WG Gemeindeamt Globasnitz publishes a total hardness of 1,63 mmol/l for the supply zone at-globasnitz gesamt — that corresponds to 9.1 °dH. The hardness range is a classification under the German Detergents and Cleaning Products Act (soft below 8,4 °dH, medium 8,4 to 14 °dH, hard above that) and not a quality verdict — it indicates how much calcium and magnesium is dissolved in the water. Basis: 30.06.2026, retrieved on 11/08/2026.
How much nitrate is in the drinking water in Eberndorf, Globasnitz?
WG Gemeindeamt Globasnitz publishes a nitrate value of 3,14 mg/l for the supply zone at-globasnitz gesamt. The statutory parametric value is 50 mg/l; the measured value represents 6 % of the parametric value. Basis: 30.06.2026, retrieved on 11/08/2026.
Who supplies the drinking water in Eberndorf, Globasnitz?
WG Gemeindeamt Globasnitz. The values shown here come from the supply zone at-globasnitz gesamt and apply to the water the supplier delivers. What happens between the building connection and the tap — in old lead pipes, for example — is not covered by these analyses; information on that is provided by owners, the health authority or an examination by an accredited laboratory.

General questions — how current the data is, limit of quantification, parametric values, who is behind this site — are answered under Questions & answers.