Skip to content
maunawai.info

Drinking water in Dorfchemnitz, Mulda, Sayda

6 supply zones — values can differ depending on the district. Below is the zone with the most documented parameters, the others collapsed underneath. To determine the exact match, look up the postcode.

How to read the share of the parametric value

12 % Share of the parametric value. The proportion of the permitted maximum that the measured value uses — here 12 %, so just over an eighth.
< 10 % * Below the limit of quantification. The substance was not detectable. The mark shows where the detection limit lies relative to the parametric value — the actual share of the parametric value is below that.

Several samples per year: for chemical parameters the mean value is given, for microbiological ones the highest measured value. There the parametric value is zero — a single finding would disappear in the average, and it is precisely that finding which is the information. Which reference applies is stated in the last column of the table.

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

These values are more than a year old. The most recent analysis the water supplier has published for this zone dates from 31/12/2020. We have no newer values — which is why we show the latest available ones rather than none at all. They say nothing about how the water has changed since then.

Water hardness
4.2 °dH
Hardness range soft
Key values MW FREIBERG
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 15 mg/l 50 mg/l
30 %
Mean
Sulphate 26 mg/l 250 mg/l
10 %
Mean
Show all recorded parameters (8 — most recent value per parameter)

Chemical parameters (2)

Chemical parameters – MW FREIBERG
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 15 mg/l 50 mg/l
30 %
Mean
Uranium <0.0001 mg/l
below limit of quantification
10 µg/l
< 1 % *
Mean

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Indicator parameters (5)

Indicator parameters – MW FREIBERG
Parameter Value Parametric value Share of the parametric value Reference
Aluminium 0.03 mg/l 0.2 mg/l
15 %
Mean
Iron 0.03 mg/l 0.2 mg/l
15 %
Mean
Manganese 0.020 mg/l 50 µg/l
40 %
Mean
pH 8.5 - 6,5–9,5 Mean
Sulphate 26 mg/l 250 mg/l
10 %
Mean

Further parameters (1)

Further parameters – MW FREIBERG
Parameter Value Parametric value Share of the parametric value Reference
Total hardness 4.2 °dH Mean

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Source: https://apps.gesunde.sachsen.de/trinkwasser/trinkwasser-detail-WSZ_DESN_1170-de.html · aktualisiert am 16.05.2023 · Jahr 2020 · retrieved on 11/07/2026

Postcodes in this zone: 09619

Show 5 more supply zones

MW FREIBERG (Sachsen, WSZ 1170)

Wasserzweckverband Freiberg

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

These values are more than a year old. The most recent analysis the water supplier has published for this zone dates from 31/12/2020. We have no newer values — which is why we show the latest available ones rather than none at all. They say nothing about how the water has changed since then.

Water hardness
4.2 °dH
Hardness range soft
Key values MW FREIBERG (Sachsen, WSZ 1170)
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 15 mg/l 50 mg/l
30 %
Mean
Sulphate 26 mg/l 250 mg/l
10 %
Mean
Show all recorded parameters (8 — most recent value per parameter)

Chemical parameters (2)

Chemical parameters – MW FREIBERG (Sachsen, WSZ 1170)
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 15 mg/l 50 mg/l
30 %
Mean
Uranium <0.0001 mg/l
below limit of quantification
10 µg/l
< 1 % *
Mean

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Indicator parameters (5)

Indicator parameters – MW FREIBERG (Sachsen, WSZ 1170)
Parameter Value Parametric value Share of the parametric value Reference
Aluminium 0.03 mg/l 0.2 mg/l
15 %
Mean
Iron 0.03 mg/l 0.2 mg/l
15 %
Mean
Manganese 0.020 mg/l 50 µg/l
40 %
Mean
pH 8.5 - 6,5–9,5 Mean
Sulphate 26 mg/l 250 mg/l
10 %
Mean

Further parameters (1)

Further parameters – MW FREIBERG (Sachsen, WSZ 1170)
Parameter Value Parametric value Share of the parametric value Reference
Total hardness 4.2 °dH Mean

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Source: https://apps.gesunde.sachsen.de/trinkwasser/trinkwasser-detail-WSZ_DESN_1170-de.html · Jahresdurchschnitt 2020 · retrieved on 11/07/2026

Postcodes in this zone: 09619

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

These values are more than a year old. The most recent analysis the water supplier has published for this zone dates from 31/12/2020. We have no newer values — which is why we show the latest available ones rather than none at all. They say nothing about how the water has changed since then.

Water hardness
4.8 °dH
Hardness range soft
Key values WW LICHTENBERG
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 22 mg/l 50 mg/l
44 %
Mean
Sulphate 27 mg/l 250 mg/l
11 %
Mean
Show all recorded parameters (8 — most recent value per parameter)

Chemical parameters (2)

Chemical parameters – WW LICHTENBERG
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 22 mg/l 50 mg/l
44 %
Mean
Uranium 0.0001 mg/l 10 µg/l
1 %
Mean

Indicator parameters (5)

Indicator parameters – WW LICHTENBERG
Parameter Value Parametric value Share of the parametric value Reference
Aluminium 0.02 mg/l 0.2 mg/l
10 %
Mean
Iron 0.02 mg/l 0.2 mg/l
10 %
Mean
Manganese 0.013 mg/l 50 µg/l
26 %
Mean
pH 8.4 - 6,5–9,5 Mean
Sulphate 27 mg/l 250 mg/l
11 %
Mean

Further parameters (1)

Further parameters – WW LICHTENBERG
Parameter Value Parametric value Share of the parametric value Reference
Total hardness 4.8 °dH Mean

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Source: https://apps.gesunde.sachsen.de/trinkwasser/trinkwasser-detail-WSZ_DESN_1150-de.html · aktualisiert am 16.05.2023 · Jahr 2020 · retrieved on 14/07/2026

Postcodes in this zone: 09619

WW LICHTENBERG (Sachsen, WSZ 1150)

WW Lichtenberg (Sachsen)

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

These values are more than a year old. The most recent analysis the water supplier has published for this zone dates from 31/12/2020. We have no newer values — which is why we show the latest available ones rather than none at all. They say nothing about how the water has changed since then.

Water hardness
4.8 °dH
Hardness range soft
Key values WW LICHTENBERG (Sachsen, WSZ 1150)
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 22 mg/l 50 mg/l
44 %
Mean
Sulphate 27 mg/l 250 mg/l
11 %
Mean
Show all recorded parameters (8 — most recent value per parameter)

Chemical parameters (2)

Chemical parameters – WW LICHTENBERG (Sachsen, WSZ 1150)
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 22 mg/l 50 mg/l
44 %
Mean
Uranium 0.0001 mg/l 10 µg/l
1 %
Mean

Indicator parameters (5)

Indicator parameters – WW LICHTENBERG (Sachsen, WSZ 1150)
Parameter Value Parametric value Share of the parametric value Reference
Aluminium 0.02 mg/l 0.2 mg/l
10 %
Mean
Iron 0.02 mg/l 0.2 mg/l
10 %
Mean
Manganese 0.013 mg/l 50 µg/l
26 %
Mean
pH 8.4 - 6,5–9,5 Mean
Sulphate 27 mg/l 250 mg/l
11 %
Mean

Further parameters (1)

Further parameters – WW LICHTENBERG (Sachsen, WSZ 1150)
Parameter Value Parametric value Share of the parametric value Reference
Total hardness 4.8 °dH Mean

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Postcodes in this zone: 09619

Pumpstation Deutschgeorgenthal

Wasserzweckverband Freiberg

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

No core values are available for this zone yet.

Postcodes in this zone: 09619

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

No core values are available for this zone yet.

Postcodes in this zone: 09619

Frequently asked questions about drinking water in Dorfchemnitz, Mulda, Sayda

How hard is the water in Dorfchemnitz, Mulda, Sayda?
Wasserzweckverband Freiberg publishes a total hardness of 4.2 °dH for the supply zone MW FREIBERG (hardness range soft). The hardness range is a classification under the German Detergents and Cleaning Products Act (soft below 8,4 °dH, medium 8,4 to 14 °dH, hard above that) and not a quality verdict — it indicates how much calcium and magnesium is dissolved in the water. Basis: aktualisiert am 16.05.2023, retrieved on 11/07/2026.
How much nitrate is in the drinking water in Dorfchemnitz, Mulda, Sayda?
Wasserzweckverband Freiberg publishes a nitrate value of 15 mg/l for the supply zone MW FREIBERG. The statutory parametric value is 50 mg/l; the measured value represents 30 % of the parametric value. Basis: aktualisiert am 16.05.2023, retrieved on 11/07/2026.
Who supplies the drinking water in Dorfchemnitz, Mulda, Sayda?
Wasserzweckverband Freiberg. The values shown here come from the supply zone MW FREIBERG and apply to the water the supplier delivers. What happens between the building connection and the tap — in old lead pipes, for example — is not covered by these analyses; information on that is provided by owners, the health authority or an examination by an accredited laboratory.

General questions — how current the data is, limit of quantification, parametric values, who is behind this site — are answered under Questions & answers.