Skip to content
maunawai.info

Drinking water in Dietfurt

3 supply zones — values can differ depending on the district. Below is the zone with the most documented parameters, the others collapsed underneath. To determine the exact match, look up the postcode.

How to read the share of the parametric value

12 % Share of the parametric value. The proportion of the permitted maximum that the measured value uses — here 12 %, so just over an eighth.
< 10 % * Below the limit of quantification. The substance was not detectable. The mark shows where the detection limit lies relative to the parametric value — the actual share of the parametric value is below that.

Several samples per year: for chemical parameters the mean value is given, for microbiological ones the highest measured value. There the parametric value is zero — a single finding would disappear in the average, and it is precisely that finding which is the information. Which reference applies is stated in the last column of the table.

Bütschwil und Dietfurt

rwt Regionalwerk Toggenburg AG

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

Water hardness
19.4 °dH
Hardness range hard
Key values Bütschwil und Dietfurt
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 12.7 mg/l 40 mg/l
32 %
Mean · Bütschwil und Dietfurt
Escherichia coli (E. coli) 0 KBE/100ml 0/100 ml Maximum · Median 0 · Bütschwil und Dietfurt
Show all recorded parameters (7 — most recent value per parameter)

Microbiology (3)

Microbiology – Bütschwil und Dietfurt
Parameter Value Parametric value Share of the parametric value Reference
Aerobic mesophilic bacteria 13.3 KBE/ml 300 1/ml Mean · Bütschwil und Dietfurt
Escherichia coli (E. coli) 0 KBE/100ml 0/100 ml Maximum · Median 0 · Bütschwil und Dietfurt
Intestinal enterococci 1 KBE/100ml 0/100 ml above the parametric value — this parameter must not be detectable Maximum · Median 0 · Bütschwil und Dietfurt

An exceedance of a parametric value does not automatically mean a health risk; the statutory parametric values include safety margins. Assessment and any measures are the responsibility of the competent health authority of the respective country.

Chemical parameters (1)

Chemical parameters – Bütschwil und Dietfurt
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 12.7 mg/l 40 mg/l
32 %
Mean · Bütschwil und Dietfurt

Further parameters (3)

Further parameters – Bütschwil und Dietfurt
Parameter Value Parametric value Share of the parametric value Reference
Calcium 106 mg/l Mean · Bütschwil und Dietfurt
Magnesium 19 mg/l Mean · Bütschwil und Dietfurt
Total hardness 34.7 °fH Mean · Bütschwil und Dietfurt

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Postcodes in this zone: 9615

Show 2 more supply zones

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

Water hardness
17.9 °dH
Hardness range hard
Key values Ganterschwil
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 26.8 mg/l 40 mg/l
67 %
Mean · Ganterschwil
Escherichia coli (E. coli) 0 KBE/100ml 0/100 ml Maximum · Median 0 · Ganterschwil
Show all recorded parameters (7 — most recent value per parameter)

Microbiology (3)

Microbiology – Ganterschwil
Parameter Value Parametric value Share of the parametric value Reference
Aerobic mesophilic bacteria 8.73 KBE/ml 300 1/ml Mean · Ganterschwil
Escherichia coli (E. coli) 0 KBE/100ml 0/100 ml Maximum · Median 0 · Ganterschwil
Intestinal enterococci 2 KBE/100ml 0/100 ml above the parametric value — this parameter must not be detectable Maximum · Median 0 · Ganterschwil

An exceedance of a parametric value does not automatically mean a health risk; the statutory parametric values include safety margins. Assessment and any measures are the responsibility of the competent health authority of the respective country.

Chemical parameters (1)

Chemical parameters – Ganterschwil
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 26.8 mg/l 40 mg/l
67 %
Mean · Ganterschwil

Further parameters (3)

Further parameters – Ganterschwil
Parameter Value Parametric value Share of the parametric value Reference
Calcium 93 mg/l Mean · Ganterschwil
Magnesium 22 mg/l Mean · Ganterschwil
Total hardness 31.9 °fH Mean · Ganterschwil

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Postcodes in this zone: 9615

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

Water hardness
11.9 °dH
Hardness range medium
Key values Kengelbach
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 4 mg/l 40 mg/l
10 %
Mean · Kengelbach
Escherichia coli (E. coli) 0 KBE/100ml 0/100 ml Maximum · Median 0 · Kengelbach
Show all recorded parameters (7 — most recent value per parameter)

Microbiology (3)

Microbiology – Kengelbach
Parameter Value Parametric value Share of the parametric value Reference
Aerobic mesophilic bacteria 30 KBE/ml 300 1/ml Mean · Kengelbach
Escherichia coli (E. coli) 0 KBE/100ml 0/100 ml Maximum · Median 0 · Kengelbach
Intestinal enterococci 0 KBE/100ml 0/100 ml Maximum · Median 0 · Kengelbach

Chemical parameters (1)

Chemical parameters – Kengelbach
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 4 mg/l 40 mg/l
10 %
Mean · Kengelbach

Further parameters (3)

Further parameters – Kengelbach
Parameter Value Parametric value Share of the parametric value Reference
Calcium 61 mg/l Mean · Kengelbach
Magnesium 15 mg/l Mean · Kengelbach
Total hardness 21.3 °fH Mean · Kengelbach

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Postcodes in this zone: 9615

Frequently asked questions about drinking water in Dietfurt

How hard is the water in Dietfurt?
rwt Regionalwerk Toggenburg AG publishes a total hardness of 34.7 °fH for the supply zone Bütschwil und Dietfurt — that corresponds to 19.4 °dH. The hardness range is a classification under the German Detergents and Cleaning Products Act (soft below 8,4 °dH, medium 8,4 to 14 °dH, hard above that) and not a quality verdict — it indicates how much calcium and magnesium is dissolved in the water. Basis: 2025, retrieved on 07/08/2026.
How much nitrate is in the drinking water in Dietfurt?
rwt Regionalwerk Toggenburg AG publishes a nitrate value of 12.7 mg/l for the supply zone Bütschwil und Dietfurt. The statutory parametric value is 40 mg/l; the measured value represents 32 % of the parametric value. Basis: 2025, retrieved on 07/08/2026.
Who supplies the drinking water in Dietfurt?
rwt Regionalwerk Toggenburg AG. The values shown here come from the supply zone Bütschwil und Dietfurt and apply to the water the supplier delivers. What happens between the building connection and the tap — in old lead pipes, for example — is not covered by these analyses; information on that is provided by owners, the health authority or an examination by an accredited laboratory.

General questions — how current the data is, limit of quantification, parametric values, who is behind this site — are answered under Questions & answers.