Skip to content
maunawai.info

Drinking water in Dallenwil, Niederrickenbach, Wiesenberg u.a.

2 supply zones — values can differ depending on the district. Below is the zone with the most documented parameters, the others collapsed underneath. To determine the exact match, look up the postcode.

How to read the share of the parametric value

12 % Share of the parametric value. The proportion of the permitted maximum that the measured value uses — here 12 %, so just over an eighth.
< 10 % * Below the limit of quantification. The substance was not detectable. The mark shows where the detection limit lies relative to the parametric value — the actual share of the parametric value is below that.

Several samples per year: for chemical parameters the mean value is given, for microbiological ones the highest measured value. There the parametric value is zero — a single finding would disappear in the average, and it is precisely that finding which is the information. Which reference applies is stated in the last column of the table.

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

Water hardness
9.9 °dH
Hardness range medium
Key values Dallenwil
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 3.3 mg/l 40 mg/l
8 %
Mean · Dallenwil
Escherichia coli (E. coli) 0 KBE/100ml 0/100 ml Maximum · Median 0 · Dallenwil
Sulphate 17.7 mg/l Mean · Dallenwil
Show all recorded parameters (12 — most recent value per parameter)

Microbiology (3)

Microbiology – Dallenwil
Parameter Value Parametric value Share of the parametric value Reference
Aerobic mesophilic bacteria 24.7 KBE/ml 300 1/ml Mean · Dallenwil
Escherichia coli (E. coli) 0 KBE/100ml 0/100 ml Maximum · Median 0 · Dallenwil
Intestinal enterococci 0 KBE/100ml 0/100 ml Maximum · Median 0 · Dallenwil

Chemical parameters (1)

Chemical parameters – Dallenwil
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 3.3 mg/l 40 mg/l
8 %
Mean · Dallenwil

Indicator parameters (5)

Indicator parameters – Dallenwil
Parameter Value Parametric value Share of the parametric value Reference
Chloride 1.2 mg/l Mean · Dallenwil
Conductivity (25 °C) 335 µS/cm Mean · Dallenwil
pH 7.72 Mean · Dallenwil
Sulphate 17.7 mg/l Mean · Dallenwil
Temperature 9.4 °C Mean · Dallenwil

Further parameters (3)

Further parameters – Dallenwil
Parameter Value Parametric value Share of the parametric value Reference
Calcium 60 mg/l Mean · Dallenwil
Magnesium 6.5 mg/l Mean · Dallenwil
Total hardness 17.7 °fH Mean · Dallenwil

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Source: https://trinkwasser.ch/de/versorger/1188/dallenwilwiesenberg/3040/dallenwil · 2025 · 2025 · retrieved on 07/08/2026

Postcodes in this zone: 6383

Show 1 more supply zone

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

Key values Wiesenberg
Parameter Value Parametric value Share of the parametric value Reference
Escherichia coli (E. coli) 3 KBE/100ml 0/100 ml above the parametric value — this parameter must not be detectable Maximum · Median 0.3 · Wiesenberg

An exceedance of a parametric value does not automatically mean a health risk; the statutory parametric values include safety margins. Assessment and any measures are the responsibility of the competent health authority of the respective country.

Show all recorded parameters (3 — most recent value per parameter)

Microbiology (3)

Microbiology – Wiesenberg
Parameter Value Parametric value Share of the parametric value Reference
Aerobic mesophilic bacteria 52 KBE/ml 300 1/ml Mean · Wiesenberg
Escherichia coli (E. coli) 3 KBE/100ml 0/100 ml above the parametric value — this parameter must not be detectable Maximum · Median 0.3 · Wiesenberg
Intestinal enterococci 1 KBE/100ml 0/100 ml above the parametric value — this parameter must not be detectable Maximum · Median 0.1 · Wiesenberg

An exceedance of a parametric value does not automatically mean a health risk; the statutory parametric values include safety margins. Assessment and any measures are the responsibility of the competent health authority of the respective country.

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Source: https://trinkwasser.ch/de/versorger/1188/dallenwilwiesenberg/3041/wiesenberg · 2025 · 2025 · retrieved on 07/08/2026

Postcodes in this zone: 6383

Frequently asked questions about drinking water in Dallenwil, Niederrickenbach, Wiesenberg u.a.

How hard is the water in Dallenwil, Niederrickenbach, Wiesenberg u.a.?
Dallenwil/Wiesenberg publishes a total hardness of 17.7 °fH for the supply zone Dallenwil — that corresponds to 9.9 °dH. The hardness range is a classification under the German Detergents and Cleaning Products Act (soft below 8,4 °dH, medium 8,4 to 14 °dH, hard above that) and not a quality verdict — it indicates how much calcium and magnesium is dissolved in the water. Basis: 2025, retrieved on 07/08/2026.
How much nitrate is in the drinking water in Dallenwil, Niederrickenbach, Wiesenberg u.a.?
Dallenwil/Wiesenberg publishes a nitrate value of 3.3 mg/l for the supply zone Dallenwil. The statutory parametric value is 40 mg/l; the measured value represents 8 % of the parametric value. Basis: 2025, retrieved on 07/08/2026.
Who supplies the drinking water in Dallenwil, Niederrickenbach, Wiesenberg u.a.?
Dallenwil/Wiesenberg. The values shown here come from the supply zone Dallenwil and apply to the water the supplier delivers. What happens between the building connection and the tap — in old lead pipes, for example — is not covered by these analyses; information on that is provided by owners, the health authority or an examination by an accredited laboratory.

General questions — how current the data is, limit of quantification, parametric values, who is behind this site — are answered under Questions & answers.