Skip to content
maunawai.info

Drinking water in Däniken SO

One supply zone, water supplier: Wasserversorgung Däniken.

How to read the share of the parametric value

12 % Share of the parametric value. The proportion of the permitted maximum that the measured value uses — here 12 %, so just over an eighth.
< 10 % * Below the limit of quantification. The substance was not detectable. The mark shows where the detection limit lies relative to the parametric value — the actual share of the parametric value is below that.

Several samples per year: for chemical parameters the mean value is given, for microbiological ones the highest measured value. There the parametric value is zero — a single finding would disappear in the average, and it is precisely that finding which is the information. Which reference applies is stated in the last column of the table.

Gemeinde Däniken

Wasserversorgung Däniken

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

These values are more than a year old. The most recent analysis the water supplier has published for this zone dates from 31/12/2024. We have no newer values — which is why we show the latest available ones rather than none at all. They say nothing about how the water has changed since then.

Water hardness
18.9 °dH
Hardness range hard
Key values Gemeinde Däniken
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 19.2 mg/l 40 mg/l
48 %
Mean · Gemeinde Däniken
Escherichia coli (E. coli) nn
not detectable
Unit not stated in the document
0/100 ml Maximum · Median nn · Gemeinde Däniken
Sodium 7.6 mg/l 200 mg/l
4 %
Mean · Gemeinde Däniken
Show all recorded parameters (12 — most recent value per parameter)

Microbiology (3)

Microbiology – Gemeinde Däniken
Parameter Value Parametric value Share of the parametric value Reference
Aerobic mesophilic bacteria 3 KBE/ml 300 1/ml Mean · Gemeinde Däniken
Escherichia coli (E. coli) nn
not detectable
Unit not stated in the document
0/100 ml Maximum · Median nn · Gemeinde Däniken
Intestinal enterococci nn
not detectable
Unit not stated in the document
0/100 ml Maximum · Median nn · Gemeinde Däniken

Chemical parameters (1)

Chemical parameters – Gemeinde Däniken
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 19.2 mg/l 40 mg/l
48 %
Mean · Gemeinde Däniken

Metabolites (2)

Metabolites – Gemeinde Däniken
Parameter Value Parametric value Share of the parametric value Reference
Chlorothalonil metabolite R417888 < 0.02 µg/l
below limit of quantification
0.1 µg/l
< 20 % *
Mean · Gemeinde Däniken
Chlorothalonil metabolite R471811 < 0.16 µg/l
below limit of quantification
0.1 µg/l cannot be assessed — the limit of quantification of the measurement is above the parametric value Mean · Gemeinde Däniken

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Indicator parameters (2)

Indicator parameters – Gemeinde Däniken
Parameter Value Parametric value Share of the parametric value Reference
Sodium 7.6 mg/l 200 mg/l
4 %
Mean · Gemeinde Däniken
Temperature 12.6 °C Mean · Gemeinde Däniken

Further parameters (4)

Further parameters – Gemeinde Däniken
Parameter Value Parametric value Share of the parametric value Reference
Calcium 2.2 mg/l Mean · Gemeinde Däniken
Magnesium 10.2 mg/l Mean · Gemeinde Däniken
Potassium 2.4 mg/l Mean · Gemeinde Däniken
Total hardness 33.7 °fH Mean · Gemeinde Däniken

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Postcodes in this zone: 4658

Frequently asked questions about drinking water in Däniken SO

How hard is the water in Däniken SO?
Wasserversorgung Däniken publishes a total hardness of 33.7 °fH for the supply zone Gemeinde Däniken — that corresponds to 18.9 °dH. The hardness range is a classification under the German Detergents and Cleaning Products Act (soft below 8,4 °dH, medium 8,4 to 14 °dH, hard above that) and not a quality verdict — it indicates how much calcium and magnesium is dissolved in the water. Basis: 2024, retrieved on 07/08/2026.
How much nitrate is in the drinking water in Däniken SO?
Wasserversorgung Däniken publishes a nitrate value of 19.2 mg/l for the supply zone Gemeinde Däniken. The statutory parametric value is 40 mg/l; the measured value represents 48 % of the parametric value. Basis: 2024, retrieved on 07/08/2026.
Who supplies the drinking water in Däniken SO?
Wasserversorgung Däniken. The values shown here come from the supply zone Gemeinde Däniken and apply to the water the supplier delivers. What happens between the building connection and the tap — in old lead pipes, for example — is not covered by these analyses; information on that is provided by owners, the health authority or an examination by an accredited laboratory.

General questions — how current the data is, limit of quantification, parametric values, who is behind this site — are answered under Questions & answers.