Skip to content
maunawai.info

Drinking water in Cremlingen

2 supply zones — values can differ depending on the district. Below is the zone with the most documented parameters, the others collapsed underneath. To determine the exact match, look up the postcode.

How to read the share of the parametric value

12 % Share of the parametric value. The proportion of the permitted maximum that the measured value uses — here 12 %, so just over an eighth.
< 10 % * Below the limit of quantification. The substance was not detectable. The mark shows where the detection limit lies relative to the parametric value — the actual share of the parametric value is below that.

Several samples per year: for chemical parameters the mean value is given, for microbiological ones the highest measured value. There the parametric value is zero — a single finding would disappear in the average, and it is precisely that finding which is the information. Which reference applies is stated in the last column of the table.

Harzwasser

Cremlingen

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

Water hardness
3.5 °dH
Hardness range weich
Key values Harzwasser
Parameter Value Parametric value Share of the parametric value Reference
Sum of PFAS <0,000005 mg/L
below limit of quantification
Single value
Nitrate 7,3 mg/L 50 mg/l
15 %
Single value
Lead <0,0011 mg/L
below limit of quantification
10 µg/l
< 11 % *
Single value
Escherichia coli (E. coli) 0 in 100 mL 0/100 ml Single value
Sulphate 25,5 mg/L 250 mg/l
10 %
Single value
Sodium 6,4 mg/L 200 mg/l
3 %
Single value

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Show all recorded parameters (66 — most recent value per parameter)

Microbiology (2)

Microbiology – Harzwasser
Parameter Value Parametric value Share of the parametric value Reference
Escherichia coli (E. coli) 0 in 100 mL 0/100 ml Single value
Intestinal enterococci 0 in 100 mL 0/100 ml Single value

Chemical parameters (30)

Chemical parameters – Harzwasser
Parameter Value Parametric value Share of the parametric value Reference
1,2-dichloroethane <0,0007 mg/L
below limit of quantification
3 µg/l
< 23 % *
Single value
Acrylamide - mg/L
not determined
0.1 µg/l Single value
Antimony <0,0015 mg/L
below limit of quantification
5 µg/l
< 30 % *
Single value
Arsenic <0,0006 mg/L
below limit of quantification
10 µg/l
< 6 % *
Single value
Benzene <0,0003 mg/L
below limit of quantification
1 µg/l
< 30 % *
Single value
Benzo(a)pyrene <0,000002 mg/L
below limit of quantification
10 ng/l
< 20 % *
Single value
Bisphenol A <0,00010 mg/L
below limit of quantification
2.5 µg/l
< 4 % *
Single value
Boron 0,03 mg/L 1 mg/l
3 %
Single value
Bromate <0,003 mg/L
below limit of quantification
10 µg/l
< 30 % *
Single value
Cadmium <0,0004 mg/L
below limit of quantification
3 µg/l
< 13 % *
Single value
Chlorate <0,020 mg/L
below limit of quantification
70 µg/l
< 29 % *
Single value
Chlorite <0,06 mg/L
below limit of quantification
0.2 mg/l
< 30 % *
Single value
Chromium <0,0005 mg/L
below limit of quantification
25 µg/l
< 2 % *
Single value
Copper <0,010 mg/L
below limit of quantification
2 mg/l
< 0.5 % *
Single value
Cyanide <0,005 mg/L
below limit of quantification
50 µg/l
< 10 % *
Single value
Epichlorohydrin - mg/L
not determined
0.1 µg/l Single value
Fluoride 0,04 mg/L 1.5 mg/l
3 %
Single value
Lead <0,0011 mg/L
below limit of quantification
10 µg/l
< 11 % *
Single value
Mercury <0,00010 mg/L
below limit of quantification
1 µg/l
< 10 % *
Single value
Nickel <0,0010 mg/L
below limit of quantification
20 µg/l
< 5 % *
Single value
Nitrate 7,3 mg/L 50 mg/l
15 %
Single value
Nitrite <0,01 mg/L
below limit of quantification
0.5 mg/l
< 2 % *
Single value
Pesticides n.n. mg/L
not detectable
0.1 µg/l Single value
Pesticides — Total <0,000030 mg/L
below limit of quantification
0.5 µg/l
< 6 % *
Single value
Polycyclic aromatic hydrocarbons <0,000010 mg/L
below limit of quantification
0.1 µg/l
< 10 % *
Single value
Selenium <0,0010 mg/L
below limit of quantification
10 µg/l
< 10 % *
Single value
Tetrachloroethene and Trichloroethene (sum) <0,0009 mg/L
below limit of quantification
10 µg/l
< 9 % *
Single value
Trihalomethanes — Total 0,0085 mg/L 50 µg/l
17 %
Single value
Uranium <0,0001 mg/L
below limit of quantification
10 µg/l
< 1 % *
Single value
Vinyl chloride - mg/L
not determined
0.5 µg/l Single value

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

PFAS (2)

PFAS – Harzwasser
Parameter Value Parametric value Share of the parametric value Reference
Sum of 4 PFAS <0,000001 mg/L
below limit of quantification
Single value
Sum of PFAS <0,000005 mg/L
below limit of quantification
Single value

Indicator parameters (21)

Indicator parameters – Harzwasser
Parameter Value Parametric value Share of the parametric value Reference
Aluminium 0,018 mg/L 0.2 mg/l
9 %
Single value
Ammonium <0,04 mg/L
below limit of quantification
0.5 mg/l
< 8 % *
Single value
Calcite dissolution capacity -2,2 mg/L 5 mg/l CaCO3 Single value
Chloride 7,9 mg/L 250 mg/l
3 %
Single value
Clostridium perfringens (including spores) 0 in 100 mL 0/100 ml Single value
Coliform bacteria 0 in 100 mL 0/100 ml Single value
Colony count 22 °C 0 in 1 mL ohne anormale Veränderung Single value
Colony count 36 °C 0 in 1 mL ohne anormale Veränderung Single value
Colour 0,1 1/m 0.5 m⁻¹ Single value
Conductivity (25 °C) 172 µS/cm 2,790 µS/cm Single value
Iron <0,010 mg/L
below limit of quantification
0.2 mg/l
< 5 % *
Single value
Manganese 0,001 mg/L 50 µg/l
2 %
Single value
Odour normal für den Verbraucher annehmbar Single value
Oxidisability - mg/L O2
not determined
5 mg/l O2 Single value
pH 9,07 - 6,5–9,5 Single value
Sodium 6,4 mg/L 200 mg/l
3 %
Single value
Sulphate 25,5 mg/L 250 mg/l
10 %
Single value
Taste normal - für den Verbraucher annehmbar Single value
Temperature 9,3 °C Single value
Total organic carbon (TOC) 1,6 mg/L ohne anormale Veränderung Single value
Turbidity 0,16 NTU 1 NTU Single value

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Further parameters (11)

Further parameters – Harzwasser
Parameter Value Parametric value Share of the parametric value Reference
Acid capacity to pH 4.3 0,73 mol/m3 Single value
Base capacity to pH 8.2 - mol/m3
not determined
Single value
Calcium 0,51 mol/m3 Single value
Carbonate hardness 2,0 °dH Single value
Hardness range (WRMG) weich - Single value
Magnesium 0,12 mol/m3 Single value
Oxygen 10,6 g/m3 Single value
Potassium 0,02 mol/m3 Single value
Silicate / silicic acid 6,6 g/m3 SiO2 Single value
Sum of alkaline earth metals 0,63 mol/m3 Single value
Total hardness 3,5 °dH Single value

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Source: http://www.vftv.de/wwl/ana05.htm · Dezember 2025 · August 2025 · retrieved on 11/07/2026

Postcodes in this zone: 38162

Show 1 more supply zone

Wasserwerk Gr. Brunsrode, Werksausgang

Lehre

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

Water hardness
8.1 °dH
Hardness range weich
Key values Wasserwerk Gr. Brunsrode, Werksausgang
Parameter Value Parametric value Share of the parametric value Reference
Sum of PFAS <0,000005 mg/L
below limit of quantification
Single value
Nitrate 2,1 mg/L 50 mg/l
4 %
Single value
Lead <0,0011 mg/L
below limit of quantification
10 µg/l
< 11 % *
Single value
Escherichia coli (E. coli) 0 in 100 mL 0/100 ml Single value
Sulphate 42,6 mg/L 250 mg/l
17 %
Single value
Sodium 20,5 mg/L 200 mg/l
10 %
Single value

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Show all recorded parameters (66 — most recent value per parameter)

Microbiology (2)

Microbiology – Wasserwerk Gr. Brunsrode, Werksausgang
Parameter Value Parametric value Share of the parametric value Reference
Escherichia coli (E. coli) 0 in 100 mL 0/100 ml Single value
Intestinal enterococci 0 in 100 mL 0/100 ml Single value

Chemical parameters (30)

Chemical parameters – Wasserwerk Gr. Brunsrode, Werksausgang
Parameter Value Parametric value Share of the parametric value Reference
1,2-dichloroethane <0,0007 mg/L
below limit of quantification
3 µg/l
< 23 % *
Single value
Acrylamide - mg/L
not determined
0.1 µg/l Single value
Antimony <0,0015 mg/L
below limit of quantification
5 µg/l
< 30 % *
Single value
Arsenic <0,0006 mg/L
below limit of quantification
10 µg/l
< 6 % *
Single value
Benzene <0,0003 mg/L
below limit of quantification
1 µg/l
< 30 % *
Single value
Benzo(a)pyrene <0,000002 mg/L
below limit of quantification
10 ng/l
< 20 % *
Single value
Bisphenol A <0,00010 mg/L
below limit of quantification
2.5 µg/l
< 4 % *
Single value
Boron 0,03 mg/L 1 mg/l
3 %
Single value
Bromate <0,003 mg/L
below limit of quantification
10 µg/l
< 30 % *
Single value
Cadmium <0,0004 mg/L
below limit of quantification
3 µg/l
< 13 % *
Single value
Chlorate <0,020 mg/L
below limit of quantification
70 µg/l
< 29 % *
Single value
Chlorite <0,06 mg/L
below limit of quantification
0.2 mg/l
< 30 % *
Single value
Chromium <0,0005 mg/L
below limit of quantification
25 µg/l
< 2 % *
Single value
Copper 0,014 mg/L 2 mg/l
0.7 %
Single value
Cyanide <0,005 mg/L
below limit of quantification
50 µg/l
< 10 % *
Single value
Epichlorohydrin - mg/L
not determined
0.1 µg/l Single value
Fluoride 0,13 mg/L 1.5 mg/l
9 %
Single value
Lead <0,0011 mg/L
below limit of quantification
10 µg/l
< 11 % *
Single value
Mercury <0,00010 mg/L
below limit of quantification
1 µg/l
< 10 % *
Single value
Nickel <0,0010 mg/L
below limit of quantification
20 µg/l
< 5 % *
Single value
Nitrate 2,1 mg/L 50 mg/l
4 %
Single value
Nitrite <0,01 mg/L
below limit of quantification
0.5 mg/l
< 2 % *
Single value
Pesticides n.n. mg/L
not detectable
0.1 µg/l Single value
Pesticides — Total <0,000030 mg/L
below limit of quantification
0.5 µg/l
< 6 % *
Single value
Polycyclic aromatic hydrocarbons <0,000010 mg/L
below limit of quantification
0.1 µg/l
< 10 % *
Single value
Selenium <0,0010 mg/L
below limit of quantification
10 µg/l
< 10 % *
Single value
Tetrachloroethene and Trichloroethene (sum) <0,0009 mg/L
below limit of quantification
10 µg/l
< 9 % *
Single value
Trihalomethanes — Total 0,0019 mg/L 50 µg/l
4 %
Single value
Uranium <0,0001 mg/L
below limit of quantification
10 µg/l
< 1 % *
Single value
Vinyl chloride - mg/L
not determined
0.5 µg/l Single value

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

PFAS (2)

PFAS – Wasserwerk Gr. Brunsrode, Werksausgang
Parameter Value Parametric value Share of the parametric value Reference
Sum of 4 PFAS <0,000001 mg/L
below limit of quantification
Single value
Sum of PFAS <0,000005 mg/L
below limit of quantification
Single value

Indicator parameters (21)

Indicator parameters – Wasserwerk Gr. Brunsrode, Werksausgang
Parameter Value Parametric value Share of the parametric value Reference
Aluminium 0,011 mg/L 0.2 mg/l
5 %
Single value
Ammonium <0,04 mg/L
below limit of quantification
0.5 mg/l
< 8 % *
Single value
Calcite dissolution capacity -2,5 mg/L 5 mg/l CaCO3 Single value
Chloride 26,1 mg/L 250 mg/l
10 %
Single value
Clostridium perfringens (including spores) 0 in 100 mL 0/100 ml Single value
Coliform bacteria 0 in 100 mL 0/100 ml Single value
Colony count 22 °C 1 in 1 mL ohne anormale Veränderung Single value
Colony count 36 °C 0 in 1 mL ohne anormale Veränderung Single value
Colour 0,1 1/m 0.5 m⁻¹ Single value
Conductivity (25 °C) 398 µS/cm 2,790 µS/cm Single value
Iron <0,010 mg/L
below limit of quantification
0.2 mg/l
< 5 % *
Single value
Manganese <0,001 mg/L
below limit of quantification
50 µg/l
< 2 % *
Single value
Odour normal für den Verbraucher annehmbar Single value
Oxidisability - mg/L O2
not determined
5 mg/l O2 Single value
pH 7,90 - 6,5–9,5 Single value
Sodium 20,5 mg/L 200 mg/l
10 %
Single value
Sulphate 42,6 mg/L 250 mg/l
17 %
Single value
Taste normal - für den Verbraucher annehmbar Single value
Temperature 14,5 °C Single value
Total organic carbon (TOC) 1,6 mg/L ohne anormale Veränderung Single value
Turbidity 0,18 NTU 1 NTU Single value

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Further parameters (11)

Further parameters – Wasserwerk Gr. Brunsrode, Werksausgang
Parameter Value Parametric value Share of the parametric value Reference
Acid capacity to pH 4.3 2,25 mol/m3 Single value
Base capacity to pH 8.2 - mol/m3
not determined
Single value
Calcium 1,29 mol/m3 Single value
Carbonate hardness 6,3 °dH Single value
Hardness range (WRMG) weich - Single value
Magnesium 0,16 mol/m3 Single value
Oxygen 6,6 g/m3 Single value
Potassium 0,04 mol/m3 Single value
Silicate / silicic acid 15,7 g/m3 SiO2 Single value
Sum of alkaline earth metals 1,45 mol/m3 Single value
Total hardness 8,1 °dH Single value

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Source: http://www.vftv.de/wwl/ana03.htm · Dezember 2025 · August 2025 · retrieved on 11/07/2026

Postcodes in this zone: 38162

Frequently asked questions about drinking water in Cremlingen

How hard is the water in Cremlingen?
Cremlingen publishes a total hardness of 3.5 °dH for the supply zone Harzwasser (hardness range weich). The hardness range is a classification under the German Detergents and Cleaning Products Act (soft below 8,4 °dH, medium 8,4 to 14 °dH, hard above that) and not a quality verdict — it indicates how much calcium and magnesium is dissolved in the water. Basis: Dezember 2025, retrieved on 11/07/2026.
How much nitrate is in the drinking water in Cremlingen?
Cremlingen publishes a nitrate value of 7,3 mg/L for the supply zone Harzwasser. The statutory parametric value is 50 mg/l; the measured value represents 15 % of the parametric value. Basis: Dezember 2025, retrieved on 11/07/2026.
Who supplies the drinking water in Cremlingen?
Cremlingen. The values shown here come from the supply zone Harzwasser and apply to the water the supplier delivers. What happens between the building connection and the tap — in old lead pipes, for example — is not covered by these analyses; information on that is provided by owners, the health authority or an examination by an accredited laboratory.

General questions — how current the data is, limit of quantification, parametric values, who is behind this site — are answered under Questions & answers.