Skip to content
maunawai.info

Drinking water in Crans VD

2 supply zones — values can differ depending on the district. Below is the zone with the most documented parameters, the others collapsed underneath. To determine the exact match, look up the postcode.

How to read the share of the parametric value

12 % Share of the parametric value. The proportion of the permitted maximum that the measured value uses — here 12 %, so just over an eighth.
< 10 % * Below the limit of quantification. The substance was not detectable. The mark shows where the detection limit lies relative to the parametric value — the actual share of the parametric value is below that.

Several samples per year: for chemical parameters the mean value is given, for microbiological ones the highest measured value. There the parametric value is zero — a single finding would disappear in the average, and it is precisely that finding which is the information. Which reference applies is stated in the last column of the table.

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

These values are more than a year old. The most recent analysis the water supplier has published for this zone dates from 31/12/2024. We have no newer values — which is why we show the latest available ones rather than none at all. They say nothing about how the water has changed since then.

Water hardness
14.6 °dH
Hardness range hard
Key values Région Nyon
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 4.84 mg/l 40 mg/l
12 %
Mean · Région Nyon
Sulphate 8.12 mg/l Mean · Région Nyon
Sodium 3.64 mg/l 200 mg/l
2 %
Mean · Région Nyon
Show all recorded parameters (12 — most recent value per parameter)

Chemical parameters (2)

Chemical parameters – Région Nyon
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 4.84 mg/l 40 mg/l
12 %
Mean · Région Nyon
Nitrite 0.0017 mg/l 0.1 mg/l
2 %
Mean · Région Nyon

Indicator parameters (5)

Indicator parameters – Région Nyon
Parameter Value Parametric value Share of the parametric value Reference
Ammonium 0.003 mg/l 0.5 mg/l
0.6 %
Mean · Région Nyon
Chloride 4.27 mg/l Mean · Région Nyon
Sodium 3.64 mg/l 200 mg/l
2 %
Mean · Région Nyon
Sulphate 8.12 mg/l Mean · Région Nyon
Temperature 13.4 °C Mean · Région Nyon

Further parameters (5)

Further parameters – Région Nyon
Parameter Value Parametric value Share of the parametric value Reference
Calcium 89.14 mg/l Mean · Région Nyon
Magnesium 9.27 mg/l Mean · Région Nyon
Phosphate 0.0054 mg/l 1 mg/l
0.5 %
Mean · Région Nyon
Potassium 1.61 mg/l Mean · Région Nyon
Total hardness 26.1 °fH Mean · Région Nyon

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Postcodes in this zone: 1299

Show 1 more supply zone

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

These values are more than a year old. The most recent analysis the water supplier has published for this zone dates from 31/12/2024. We have no newer values — which is why we show the latest available ones rather than none at all. They say nothing about how the water has changed since then.

Water hardness
14.1 °dH
Hardness range hard
Key values SIECGE
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 2.53 mg/l 40 mg/l
6 %
Mean · SIECGE
Sulphate 5.33 mg/l Mean · SIECGE
Sodium 2.27 mg/l 200 mg/l
1 %
Mean · SIECGE
Show all recorded parameters (12 — most recent value per parameter)

Chemical parameters (2)

Chemical parameters – SIECGE
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 2.53 mg/l 40 mg/l
6 %
Mean · SIECGE
Nitrite 0.0017 mg/l 0.1 mg/l
2 %
Mean · SIECGE

Indicator parameters (5)

Indicator parameters – SIECGE
Parameter Value Parametric value Share of the parametric value Reference
Ammonium 0.0023 mg/l 0.5 mg/l
0.5 %
Mean · SIECGE
Chloride 2.68 mg/l Mean · SIECGE
Sodium 2.27 mg/l 200 mg/l
1 %
Mean · SIECGE
Sulphate 5.33 mg/l Mean · SIECGE
Temperature 12.3 °C Mean · SIECGE

Further parameters (5)

Further parameters – SIECGE
Parameter Value Parametric value Share of the parametric value Reference
Calcium 87.5 mg/l Mean · SIECGE
Magnesium 8.16 mg/l Mean · SIECGE
Phosphate 0.005 mg/l 1 mg/l
0.5 %
Mean · SIECGE
Potassium 0.48 mg/l Mean · SIECGE
Total hardness 25.2 °fH Mean · SIECGE

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Postcodes in this zone: 1299

Frequently asked questions about drinking water in Crans VD

How hard is the water in Crans VD?
Services Industriels de Nyon publishes a total hardness of 26.1 °fH for the supply zone Région Nyon — that corresponds to 14.6 °dH. The hardness range is a classification under the German Detergents and Cleaning Products Act (soft below 8,4 °dH, medium 8,4 to 14 °dH, hard above that) and not a quality verdict — it indicates how much calcium and magnesium is dissolved in the water. Basis: 2024, retrieved on 07/08/2026.
How much nitrate is in the drinking water in Crans VD?
Services Industriels de Nyon publishes a nitrate value of 4.84 mg/l for the supply zone Région Nyon. The statutory parametric value is 40 mg/l; the measured value represents 12 % of the parametric value. Basis: 2024, retrieved on 07/08/2026.
Who supplies the drinking water in Crans VD?
Services Industriels de Nyon. The values shown here come from the supply zone Région Nyon and apply to the water the supplier delivers. What happens between the building connection and the tap — in old lead pipes, for example — is not covered by these analyses; information on that is provided by owners, the health authority or an examination by an accredited laboratory.

General questions — how current the data is, limit of quantification, parametric values, who is behind this site — are answered under Questions & answers.