Skip to content
maunawai.info

Drinking water in Chemnitz

3 supply zones — values can differ depending on the district. Below is the zone with the most documented parameters, the others collapsed underneath. To determine the exact match, look up the postcode.

How to read the share of the parametric value

12 % Share of the parametric value. The proportion of the permitted maximum that the measured value uses — here 12 %, so just over an eighth.
< 10 % * Below the limit of quantification. The substance was not detectable. The mark shows where the detection limit lies relative to the parametric value — the actual share of the parametric value is below that.

Several samples per year: for chemical parameters the mean value is given, for microbiological ones the highest measured value. There the parametric value is zero — a single finding would disappear in the average, and it is precisely that finding which is the information. Which reference applies is stated in the last column of the table.

Mischwasser aus den Wasserwerken Burkersdorf/Einsiedel

eins energie in sachsen GmbH & Co. KG

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

Water hardness
4.2 °dH
Hardness range soft
Key values Mischwasser aus den Wasserwerken Burkersdorf/Einsiedel
Parameter Value Parametric value Share of the parametric value Reference
Sum of PFAS <0,0000015 mg/l
below limit of quantification
Mean
Nitrate 6,7 mg/l 50 mg/l
13 %
Mean
Lead <0,001 mg/l
below limit of quantification
10 µg/l
< 10 % *
Mean
Escherichia coli (E. coli) 0 Anzahl/100ml 0/100 ml Maximum · Median 0
Sulphate 19 mg/l 250 mg/l
8 %
Mean
Sodium 9,4 mg/l 200 mg/l
5 %
Mean

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Show all recorded parameters (67 — most recent value per parameter)

Microbiology (2)

Microbiology – Mischwasser aus den Wasserwerken Burkersdorf/Einsiedel
Parameter Value Parametric value Share of the parametric value Reference
Escherichia coli (E. coli) 0 Anzahl/100ml 0/100 ml Maximum · Median 0
Intestinal enterococci 0 Anzahl/100ml 0/100 ml Maximum · Median 0

Chemical parameters (37)

Chemical parameters – Mischwasser aus den Wasserwerken Burkersdorf/Einsiedel
Parameter Value Parametric value Share of the parametric value Reference
1,2-dichloroethane <0,0009 mg/l
below limit of quantification
3 µg/l
< 30 % *
Mean
Acrylamide <0,00003 mg/l
below limit of quantification
0.1 µg/l
< 30 % *
Mean
Antimony <0,0010 mg/l
below limit of quantification
5 µg/l
< 20 % *
Mean
Arsenic <0,001 mg/l
below limit of quantification
10 µg/l
< 10 % *
Mean
Benzene <0,00050 mg/l
below limit of quantification
1 µg/l
< 50 % *
Mean
Benzo(a)pyrene <0,000003 mg/l
below limit of quantification
10 ng/l
< 30 % *
Mean
Benzo(b)fluoranthene <0,00001 mg/l
below limit of quantification
Mean
Benzo(ghi)perylene <0,00001 mg/l
below limit of quantification
Mean
Benzo(k)fluoranthene <0,00001 mg/l
below limit of quantification
Mean
Bisphenol A <0,00010 mg/l
below limit of quantification
2.5 µg/l
< 4 % *
Mean
Boron 0,011 mg/l 1 mg/l
1 %
Mean
Bromate <0,0025 mg/l
below limit of quantification
10 µg/l
< 25 % *
Mean
Bromodichloromethane <0,0003 mg/l
below limit of quantification
Mean
Cadmium <0,0001 mg/l
below limit of quantification
3 µg/l
< 3 % *
Mean
Chlorate 0,011 mg/l 70 µg/l
16 %
Mean
Chlorite 0,110 mg/l 0.2 mg/l
55 %
Mean
Chromium <0,0005 mg/l
below limit of quantification
25 µg/l
< 2 % *
Mean
Copper 0,0035 mg/l 2 mg/l
0.2 %
Mean
Cyanide <0,01 mg/l
below limit of quantification
50 µg/l
< 20 % *
Mean
Dibromochloromethane <0,0003 mg/l
below limit of quantification
Mean
Epichlorohydrin <0,00003 mg/l
below limit of quantification
0.1 µg/l
< 30 % *
Mean
Fluoride 0,11 mg/l 1.5 mg/l
7 %
Mean
Glyphosate <0,000050 mg/l
below limit of quantification
Mean
Lead <0,001 mg/l
below limit of quantification
10 µg/l
< 10 % *
Mean
Mercury <0,00010 mg/l
below limit of quantification
1 µg/l
< 10 % *
Mean
Microcystin-LR <0,10 µg/l
below limit of quantification
Mean
Nickel <0,001 mg/l
below limit of quantification
20 µg/l
< 5 % *
Mean
Nitrate 6,7 mg/l 50 mg/l
13 %
Mean
Nitrite <0,010 mg/l
below limit of quantification
0.5 mg/l
< 2 % *
Mean
Selenium <0,001 mg/l
below limit of quantification
10 µg/l
< 10 % *
Mean
Tetrachloroethene <0,0003 mg/l
below limit of quantification
Mean
Tribromomethane (bromoform) <0,0003 mg/l
below limit of quantification
Mean
Trichloroethene <0,0003 mg/l
below limit of quantification
Mean
Trichloromethane (chloroform) <0,0003 mg/l
below limit of quantification
Mean
Trihalomethanes — Total <0,0003 mg/l
below limit of quantification
50 µg/l
< 0.6 % *
Mean
Uranium <0,00010 mg/l
below limit of quantification
10 µg/l
< 1 % *
Mean
Vinyl chloride <0,00050 mg/l
below limit of quantification
0.5 µg/l
< 100 % *
Mean

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

PFAS (2)

PFAS – Mischwasser aus den Wasserwerken Burkersdorf/Einsiedel
Parameter Value Parametric value Share of the parametric value Reference
Sum of 4 PFAS <0,0000015 mg/l
below limit of quantification
Mean
Sum of PFAS <0,0000015 mg/l
below limit of quantification
Mean

Indicator parameters (17)

Indicator parameters – Mischwasser aus den Wasserwerken Burkersdorf/Einsiedel
Parameter Value Parametric value Share of the parametric value Reference
Aluminium 0,021 mg/l 0.2 mg/l
11 %
Mean
Ammonium <0,020 mg/l
below limit of quantification
0.5 mg/l
< 4 % *
Mean
Calcite dissolution capacity <5,00 mg/l
below limit of quantification
5 mg/l CaCO3 Mean
Chloride 18,6 mg/l 250 mg/l
7 %
Mean
Clostridium perfringens (including spores) 0 Anzahl/100ml 0/100 ml Maximum · Median 0
Coliform bacteria 0 Anzahl/100ml 0/100 ml Maximum · Median 0
Colony count 22 °C 0 Anzahl/ml ohne anormale Veränderung Mean
Colony count 36 °C 0 Anzahl/ml ohne anormale Veränderung Mean
Colour <0,1 1/m
below limit of quantification
0.5 m⁻¹ Mean
Iron <0,010 mg/l
below limit of quantification
0.2 mg/l
< 5 % *
Mean
Manganese 0,006 mg/l 50 µg/l
12 %
Mean
pH 7,9 6,5–9,5 Mean
Sodium 9,4 mg/l 200 mg/l
5 %
Mean
Sulphate 19 mg/l 250 mg/l
8 %
Mean
Temperature 5,5 °C Mean
Total organic carbon (TOC) 2,2 mg/l ohne anormale Veränderung Mean
Turbidity 0,15 FNU 1 NTU Mean

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Further parameters (9)

Further parameters – Mischwasser aus den Wasserwerken Burkersdorf/Einsiedel
Parameter Value Parametric value Share of the parametric value Reference
Barium 0,03 mg/l Mean
Calcium 24,2 mg/l Mean
Magnesium 3,61 mg/l Mean
Oxygen 10,51 mg/l Mean
Phosphate <0,01 mg/l
below limit of quantification
Mean
Potassium 1,2 mg/l Mean
Silicate / silicic acid 5,35 mg/l Mean
Total hardness 4,2 °dH Mean
Zinc 0,004 mg/l Mean

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Postcodes in this zone: 09111 , 09112 , 09113 , 09114 , 09116 , 09117 , 09119 , 09120 , 09122 , 09123 , 09125 , 09126 , 09127 , 09128 , 09130 , 09131 , 09224 , 09228

Show 2 more supply zones

MW Burkersdorf, Einsiedel

Sachsen (WSZ 1160)

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

These values are more than a year old. The most recent analysis the water supplier has published for this zone dates from 31/12/2020. We have no newer values — which is why we show the latest available ones rather than none at all. They say nothing about how the water has changed since then.

Water hardness
5 °dH
Hardness range soft
Key values MW Burkersdorf, Einsiedel
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 11.1 mg/l 50 mg/l
22 %
Mean
Sulphate 26.7 mg/l 250 mg/l
11 %
Mean
Show all recorded parameters (8 — most recent value per parameter)

Chemical parameters (2)

Chemical parameters – MW Burkersdorf, Einsiedel
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 11.1 mg/l 50 mg/l
22 %
Mean
Uranium 0.0002 mg/l 10 µg/l
2 %
Mean

Indicator parameters (5)

Indicator parameters – MW Burkersdorf, Einsiedel
Parameter Value Parametric value Share of the parametric value Reference
Aluminium 0.02 mg/l 0.2 mg/l
10 %
Mean
Iron 0.03 mg/l 0.2 mg/l
15 %
Mean
Manganese 0.01 mg/l 50 µg/l
20 %
Mean
pH 8.3 - 6,5–9,5 Mean
Sulphate 26.7 mg/l 250 mg/l
11 %
Mean

Further parameters (1)

Further parameters – MW Burkersdorf, Einsiedel
Parameter Value Parametric value Share of the parametric value Reference
Total hardness 5.0 °dH Mean

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Source: https://apps.gesunde.sachsen.de/trinkwasser/trinkwasser-detail-WSZ_DESN_1160-de.html · Jahresdurchschnitt 2020 · retrieved on 11/07/2026

Postcodes in this zone: 09111 , 09112 , 09113 , 09114 , 09116 , 09117 , 09119 , 09120 , 09122 , 09123 , 09125 , 09126 , 09127 , 09128 , 09130 , 09131 , 09224 , 09228

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

Water hardness
4.7 °dH
Hardness range soft
Key values Wasserwerk Einsiedel
Parameter Value Parametric value Share of the parametric value Reference
Sum of PFAS <0,0000015 mg/l
below limit of quantification
Mean
Nitrate 12 mg/l 50 mg/l
24 %
Mean
Lead <0,001 mg/l
below limit of quantification
10 µg/l
< 10 % *
Mean
Escherichia coli (E. coli) 0 Anzahl/100ml 0/100 ml Maximum · Median 0
Sulphate 30 mg/l 250 mg/l
12 %
Mean
Sodium 10,4 mg/l 200 mg/l
5 %
Mean

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Show all recorded parameters (67 — most recent value per parameter)

Microbiology (2)

Microbiology – Wasserwerk Einsiedel
Parameter Value Parametric value Share of the parametric value Reference
Escherichia coli (E. coli) 0 Anzahl/100ml 0/100 ml Maximum · Median 0
Intestinal enterococci 0 Anzahl/100ml 0/100 ml Maximum · Median 0

Chemical parameters (37)

Chemical parameters – Wasserwerk Einsiedel
Parameter Value Parametric value Share of the parametric value Reference
1,2-dichloroethane <0,0009 mg/l
below limit of quantification
3 µg/l
< 30 % *
Mean
Acrylamide <0,00003 mg/l
below limit of quantification
0.1 µg/l
< 30 % *
Mean
Antimony <0,0010 mg/l
below limit of quantification
5 µg/l
< 20 % *
Mean
Arsenic <0,001 mg/l
below limit of quantification
10 µg/l
< 10 % *
Mean
Benzene <0,00050 mg/l
below limit of quantification
1 µg/l
< 50 % *
Mean
Benzo(a)pyrene <0,000003 mg/l
below limit of quantification
10 ng/l
< 30 % *
Mean
Benzo(b)fluoranthene <0,00001 mg/l
below limit of quantification
Mean
Benzo(ghi)perylene <0,00001 mg/l
below limit of quantification
Mean
Benzo(k)fluoranthene <0,00001 mg/l
below limit of quantification
Mean
Bisphenol A <0,00010 mg/l
below limit of quantification
2.5 µg/l
< 4 % *
Mean
Boron 0,012 mg/l 1 mg/l
1 %
Mean
Bromate <0,0025 mg/l
below limit of quantification
10 µg/l
< 25 % *
Mean
Bromodichloromethane <0,0003 mg/l
below limit of quantification
Mean
Cadmium <0,0001 mg/l
below limit of quantification
3 µg/l
< 3 % *
Mean
Chlorate 0,019 mg/l 70 µg/l
27 %
Mean
Chlorite 0,15 mg/l 0.2 mg/l
75 %
Mean
Chromium <0,0005 mg/l
below limit of quantification
25 µg/l
< 2 % *
Mean
Copper <0,0011 mg/l
below limit of quantification
2 mg/l
< < 0.1 % *
Mean
Cyanide <0,01 mg/l
below limit of quantification
50 µg/l
< 20 % *
Mean
Dibromochloromethane <0,0003 mg/l
below limit of quantification
Mean
Epichlorohydrin <0,00003 mg/l
below limit of quantification
0.1 µg/l
< 30 % *
Mean
Fluoride 0,084 mg/l 1.5 mg/l
6 %
Mean
Glyphosate <0,000050 mg/l
below limit of quantification
Mean
Lead <0,001 mg/l
below limit of quantification
10 µg/l
< 10 % *
Mean
Mercury <0,00010 mg/l
below limit of quantification
1 µg/l
< 10 % *
Mean
Microcystin-LR <0,10 µg/l
below limit of quantification
Mean
Nickel 0,002 mg/l 20 µg/l
10 %
Mean
Nitrate 12 mg/l 50 mg/l
24 %
Mean
Nitrite <0,010 mg/l
below limit of quantification
0.5 mg/l
< 2 % *
Mean
Selenium <0,001 mg/l
below limit of quantification
10 µg/l
< 10 % *
Mean
Tetrachloroethene <0,0003 mg/l
below limit of quantification
Mean
Tribromomethane (bromoform) <0,0003 mg/l
below limit of quantification
Mean
Trichloroethene <0,0003 mg/l
below limit of quantification
Mean
Trichloromethane (chloroform) <0,0003 mg/l
below limit of quantification
Mean
Trihalomethanes — Total <0,0003 mg/l
below limit of quantification
50 µg/l
< 0.6 % *
Mean
Uranium <0,00010 mg/l
below limit of quantification
10 µg/l
< 1 % *
Mean
Vinyl chloride <0,00050 mg/l
below limit of quantification
0.5 µg/l
< 100 % *
Mean

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

PFAS (2)

PFAS – Wasserwerk Einsiedel
Parameter Value Parametric value Share of the parametric value Reference
Sum of 4 PFAS <0,0000015 mg/l
below limit of quantification
Mean
Sum of PFAS <0,0000015 mg/l
below limit of quantification
Mean

Indicator parameters (17)

Indicator parameters – Wasserwerk Einsiedel
Parameter Value Parametric value Share of the parametric value Reference
Aluminium 0,018 mg/l 0.2 mg/l
9 %
Mean
Ammonium <0,020 mg/l
below limit of quantification
0.5 mg/l
< 4 % *
Mean
Calcite dissolution capacity <5,00 mg/l
below limit of quantification
5 mg/l CaCO3 Mean
Chloride 27,1 mg/l 250 mg/l
11 %
Mean
Clostridium perfringens (including spores) 0 Anzahl/100ml 0/100 ml Maximum · Median 0
Coliform bacteria 0 Anzahl/100ml 0/100 ml Maximum · Median 0
Colony count 22 °C 0 Anzahl/ml ohne anormale Veränderung Mean
Colony count 36 °C 0 Anzahl/ml ohne anormale Veränderung Mean
Colour <0,1 1/m
below limit of quantification
0.5 m⁻¹ Mean
Iron <0,010 mg/l
below limit of quantification
0.2 mg/l
< 5 % *
Mean
Manganese 0,003 mg/l 50 µg/l
6 %
Mean
pH 8,0 6,5–9,5 Mean
Sodium 10,4 mg/l 200 mg/l
5 %
Mean
Sulphate 30 mg/l 250 mg/l
12 %
Mean
Temperature 7,5 °C Mean
Total organic carbon (TOC) 2,0 mg/l ohne anormale Veränderung Mean
Turbidity 0,16 FNU 1 NTU Mean

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Further parameters (9)

Further parameters – Wasserwerk Einsiedel
Parameter Value Parametric value Share of the parametric value Reference
Barium 0,03 mg/l Mean
Calcium 25,4 mg/l Mean
Magnesium 5,16 mg/l Mean
Oxygen 11,9 mg/l Mean
Phosphate 0,0255 mg/l Mean
Potassium 2,1 mg/l Mean
Silicate / silicic acid 5,16 mg/l Mean
Total hardness 4,7 °dH Mean
Zinc 0,004 mg/l Mean

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Postcodes in this zone: 09111 , 09112 , 09113 , 09114 , 09116 , 09117 , 09119 , 09120 , 09122 , 09123 , 09125 , 09126 , 09127 , 09128 , 09130 , 09131 , 09224 , 09228

Frequently asked questions about drinking water in Chemnitz

How hard is the water in Chemnitz?
eins energie in sachsen GmbH & Co. KG publishes a total hardness of 4.2 °dH for the supply zone Mischwasser aus den Wasserwerken Burkersdorf/Einsiedel (hardness range soft). The hardness range is a classification under the German Detergents and Cleaning Products Act (soft below 8,4 °dH, medium 8,4 to 14 °dH, hard above that) and not a quality verdict — it indicates how much calcium and magnesium is dissolved in the water. Basis: Publication by the water supplier, retrieved on 11/07/2026.
How much nitrate is in the drinking water in Chemnitz?
eins energie in sachsen GmbH & Co. KG publishes a nitrate value of 6,7 mg/l for the supply zone Mischwasser aus den Wasserwerken Burkersdorf/Einsiedel. The statutory parametric value is 50 mg/l; the measured value represents 13 % of the parametric value. Basis: Publication by the water supplier, retrieved on 11/07/2026.
Who supplies the drinking water in Chemnitz?
eins energie in sachsen GmbH & Co. KG. The values shown here come from the supply zone Mischwasser aus den Wasserwerken Burkersdorf/Einsiedel and apply to the water the supplier delivers. What happens between the building connection and the tap — in old lead pipes, for example — is not covered by these analyses; information on that is provided by owners, the health authority or an examination by an accredited laboratory.

General questions — how current the data is, limit of quantification, parametric values, who is behind this site — are answered under Questions & answers.