Skip to content
maunawai.info

Drinking water in Canobbio

One supply zone, water supplier: Hittisau (Name nicht explizit im Dokument genannt, aus Dateiname abgeleitet).

How to read the share of the parametric value

12 % Share of the parametric value. The proportion of the permitted maximum that the measured value uses — here 12 %, so just over an eighth.
< 10 % * Below the limit of quantification. The substance was not detectable. The mark shows where the detection limit lies relative to the parametric value — the actual share of the parametric value is below that.

Several samples per year: for chemical parameters the mean value is given, for microbiological ones the highest measured value. There the parametric value is zero — a single finding would disappear in the average, and it is precisely that finding which is the information. Which reference applies is stated in the last column of the table.

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

No date is given for these values. The water supplier publishes the analysis without a sampling date and without a report date. When the water was examined is not apparent from the source — we do not add a date and we do not estimate one. What is stated is therefore only when we retrieved the document.

Water hardness
13.1 °dH
Hardness range medium
Key values at-hittisau gesamt
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 2.5 mg/1 50 mg/l Single value
Escherichia coli (E. coli) 0 KBE/250ml 0/100 ml Single value
Sulphate 5 mg/1 250 mg/l Single value
Sodium 1.5 mg/1 200 mg/l Single value
Show all recorded parameters (20 — most recent value per parameter)

Microbiology (3)

Microbiology – at-hittisau gesamt
Parameter Value Parametric value Share of the parametric value Reference
Escherichia coli (E. coli) 0 KBE/250ml 0/100 ml Single value
Intestinal enterococci 0 KBE/250ml 0/100 ml Single value
Pseudomonas aeruginosa 0 KBE/250ml 0/100 ml Single value

Chemical parameters (2)

Chemical parameters – at-hittisau gesamt
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 2.5 mg/1 50 mg/l Single value
Nitrite < 0.010 mg/1
below limit of quantification
0.1 mg/l Single value

Indicator parameters (10)

Indicator parameters – at-hittisau gesamt
Parameter Value Parametric value Share of the parametric value Reference
Ammonium < 0.010 mg/1
below limit of quantification
0.5 mg/l Single value
Chloride 1.2 mg/1 200 mg/l Single value
Clostridium perfringens (including spores) 0 KBE/250ml 0/100 ml Single value
Coliform bacteria 0 KBE/250ml 0/100 ml Single value
Colony count 22 °C 3 KBE/ml 100 1/ml Single value
Colony count 36 °C 0 KBE/ml 20 1/ml Single value
Iron < 5.0 µg/1
below limit of quantification
0.2 mg/l Single value
Manganese < 2.0 µg/1
below limit of quantification
50 µg/l Single value
Sodium 1.5 mg/1 200 mg/l Single value
Sulphate 5 mg/1 250 mg/l Single value

Further parameters (5)

Further parameters – at-hittisau gesamt
Parameter Value Parametric value Share of the parametric value Reference
Acid capacity to pH 4.3 4.53 mmol/I Single value
Calcium 65 mg/1 400 mg/l Single value
Magnesium 17 mg/1 150 mg/l Single value
Potassium 0.61 mg/1 50 mg/l Single value
Total hardness 13.1 °dH Single value

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Postcodes in this zone: 6952

Frequently asked questions about drinking water in Canobbio

How hard is the water in Canobbio?
Hittisau (Name nicht explizit im Dokument genannt, aus Dateiname abgeleitet) publishes a total hardness of 13.1 °dH for the supply zone at-hittisau gesamt (hardness range medium). The hardness range is a classification under the German Detergents and Cleaning Products Act (soft below 8,4 °dH, medium 8,4 to 14 °dH, hard above that) and not a quality verdict — it indicates how much calcium and magnesium is dissolved in the water. Basis: Publication by the water supplier, retrieved on 11/08/2026.
Who supplies the drinking water in Canobbio?
Hittisau (Name nicht explizit im Dokument genannt, aus Dateiname abgeleitet). The values shown here come from the supply zone at-hittisau gesamt and apply to the water the supplier delivers. What happens between the building connection and the tap — in old lead pipes, for example — is not covered by these analyses; information on that is provided by owners, the health authority or an examination by an accredited laboratory.

General questions — how current the data is, limit of quantification, parametric values, who is behind this site — are answered under Questions & answers.