Skip to content
maunawai.info

Drinking water in Bundenbach

11 supply zones — values can differ depending on the district. Below is the zone with the most documented parameters, the others collapsed underneath. To determine the exact match, look up the postcode.

How to read the share of the parametric value

12 % Share of the parametric value. The proportion of the permitted maximum that the measured value uses — here 12 %, so just over an eighth.
< 10 % * Below the limit of quantification. The substance was not detectable. The mark shows where the detection limit lies relative to the parametric value — the actual share of the parametric value is below that.

Several samples per year: for chemical parameters the mean value is given, for microbiological ones the highest measured value. There the parametric value is zero — a single finding would disappear in the average, and it is precisely that finding which is the information. Which reference applies is stated in the last column of the table.

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

No date is given for these values. The water supplier publishes the analysis without a sampling date and without a report date. When the water was examined is not apparent from the source — we do not add a date and we do not estimate one. What is stated is therefore only when we retrieved the document.

Water hardness
3.3 °dH
Hardness range soft
Key values Stipshausen
Parameter Value Parametric value Share of the parametric value Reference
Sum of PFAS 0 µg/L 0.1 µg/l
0 %
Mean · Stipshausen
Nitrate 7.3 mg/L 50 mg/l
15 %
Mean · Stipshausen
Lead < 1 µg/L
below limit of quantification
10 µg/l
< 10 % *
Mean · Stipshausen
Escherichia coli (E. coli) 0 Anzahl/100ml 0/100 ml Mean · Stipshausen
Sulphate 5.1 mg/L 250 mg/l
2 %
Mean · Stipshausen
Sodium 4.8 mg/L 200 mg/l
2 %
Mean · Stipshausen

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Show all recorded parameters (30 — most recent value per parameter)

Microbiology (1)

Microbiology – Stipshausen
Parameter Value Parametric value Share of the parametric value Reference
Escherichia coli (E. coli) 0 Anzahl/100ml 0/100 ml Mean · Stipshausen

Chemical parameters (14)

Chemical parameters – Stipshausen
Parameter Value Parametric value Share of the parametric value Reference
Antimony 1 µg/L 5 µg/l
20 %
Mean · Stipshausen
Arsenic < 1 µg/L
below limit of quantification
10 µg/l
< 10 % *
Mean · Stipshausen
Boron < 0.1 mg/L
below limit of quantification
1 mg/l
< 10 % *
Mean · Stipshausen
Cadmium < 1 µg/L
below limit of quantification
3 µg/l
< 33 % *
Mean · Stipshausen
Copper < 0.002 mg/L
below limit of quantification
2 mg/l
< 0.1 % *
Mean · Stipshausen
Cyanide < 0.005 mg/L
below limit of quantification
50 µg/l
< 10 % *
Mean · Stipshausen
Fluoride < 0.1 mg/L
below limit of quantification
1.5 mg/l
< 7 % *
Mean · Stipshausen
Lead < 1 µg/L
below limit of quantification
10 µg/l
< 10 % *
Mean · Stipshausen
Mercury < 0.1 µg/L
below limit of quantification
1 µg/l
< 10 % *
Mean · Stipshausen
Nickel < 2 µg/L
below limit of quantification
20 µg/l
< 10 % *
Mean · Stipshausen
Nitrate 7.3 mg/L 50 mg/l
15 %
Mean · Stipshausen
Nitrite < 0.03 mg/L
below limit of quantification
0.5 mg/l
< 6 % *
Mean · Stipshausen
Selenium < 1 µg/L
below limit of quantification
10 µg/l
< 10 % *
Mean · Stipshausen
Uranium < 0.2 µg/L
below limit of quantification
10 µg/l
< 2 % *
Mean · Stipshausen

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

PFAS (1)

PFAS – Stipshausen
Parameter Value Parametric value Share of the parametric value Reference
Sum of PFAS 0 µg/L 0.1 µg/l
0 %
Mean · Stipshausen

Indicator parameters (10)

Indicator parameters – Stipshausen
Parameter Value Parametric value Share of the parametric value Reference
Aluminium 0.024 mg/L 0.2 mg/l
12 %
Mean · Stipshausen
Ammonium < 0.05 mg/L
below limit of quantification
0.5 mg/l
< 10 % *
Mean · Stipshausen
Chloride 9.3 mg/L 250 mg/l
4 %
Mean · Stipshausen
Coliform bacteria 0 Anzahl/100ml 0/100 ml Mean · Stipshausen
Iron < 0.001 mg/L
below limit of quantification
0.2 mg/l
< 0.5 % *
Mean · Stipshausen
Manganese < 0.005 mg/L
below limit of quantification
50 µg/l
< 10 % *
Mean · Stipshausen
pH 8.2 - 6,5–9,5 Mean · Stipshausen
Sodium 4.8 mg/L 200 mg/l
2 %
Mean · Stipshausen
Sulphate 5.1 mg/L 250 mg/l
2 %
Mean · Stipshausen
Temperature 10 °C Mean · Stipshausen

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Further parameters (4)

Further parameters – Stipshausen
Parameter Value Parametric value Share of the parametric value Reference
Calcium 21 mg/L Mean · Stipshausen
Magnesium 1.4 mg/L Mean · Stipshausen
Potassium < 0.3 mg/L
below limit of quantification
Mean · Stipshausen
Total hardness 0.58 mmol/l Mean · Stipshausen

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Source: https://geodaten-wasser.rlp-umwelt.de/twist/2542695029/trinkwasserqualitaet · Mittelwerte · retrieved on 13/07/2026

Postcodes in this zone: 55626

Show 10 more supply zones

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

Water hardness
3.5 °dH
Hardness range weich

No core values are available for this zone yet.

Show all recorded parameters (3 — most recent value per parameter)

Further parameters (3)

Further parameters – Allenbach
Parameter Value Parametric value Share of the parametric value Reference
Carbonate hardness 0,50 mmol/l Single value · Allenbach
Hardness range (WRMG) weich Single value · Allenbach
Total hardness 3,5 ° dH Single value · Allenbach

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Postcodes in this zone: 55626

Asbach, Bruchweiler, Hammerbirkenfeld, Hellertshausen, Kempfeld, Langweiler, Schauren, Sensweiler, Wirschweiler

Verbandsgemeindewerke Herrstein-Rhaunen

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

Water hardness
4.1 °dH
Hardness range weich

No core values are available for this zone yet.

Show all recorded parameters (3 — most recent value per parameter)

Further parameters (3)

Further parameters – Asbach, Bruchweiler, Hammerbirkenfeld, Hellertshausen, Kempfeld, Langweiler, Schauren, Sensweiler, Wirschweiler
Parameter Value Parametric value Share of the parametric value Reference
Carbonate hardness 0,55 mmol/l Single value · Asbach, Bruchweiler, Hammerbirkenfeld, Hellertshausen, Kempfeld, Langweiler, Schauren, Sensweiler, Wirschweiler
Hardness range (WRMG) weich Single value · Asbach, Bruchweiler, Hammerbirkenfeld, Hellertshausen, Kempfeld, Langweiler, Schauren, Sensweiler, Wirschweiler
Total hardness 4,1 ° dH Single value · Asbach, Bruchweiler, Hammerbirkenfeld, Hellertshausen, Kempfeld, Langweiler, Schauren, Sensweiler, Wirschweiler

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Postcodes in this zone: 55626

Asbacher Hütte (Harfenmühle), Breitenthal, Herborn, Herrstein, Mörschied, Niederhosenbach, Niederwörresbach, Oberhosenbach, Oberwörresbach, Veitsrodt, Vollmersbach, Weiden

Verbandsgemeindewerke Herrstein-Rhaunen

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

Water hardness
5.5 °dH
Hardness range weich

No core values are available for this zone yet.

Show all recorded parameters (3 — most recent value per parameter)

Further parameters (3)

Further parameters – Asbacher Hütte (Harfenmühle), Breitenthal, Herborn, Herrstein, Mörschied, Niederhosenbach, Niederwörresbach, Oberhosenbach, Oberwörresbach, Veitsrodt, Vollmersbach, Weiden
Parameter Value Parametric value Share of the parametric value Reference
Carbonate hardness 0,71 mmol/l Single value · Asbacher Hütte (Harfenmühle), Breitenthal, Herborn, Herrstein, Mörschied, Niederhosenbach, Niederwörresbach, Oberhosenbach, Oberwörresbach, Veitsrodt, Vollmersbach, Weiden
Hardness range (WRMG) weich Single value · Asbacher Hütte (Harfenmühle), Breitenthal, Herborn, Herrstein, Mörschied, Niederhosenbach, Niederwörresbach, Oberhosenbach, Oberwörresbach, Veitsrodt, Vollmersbach, Weiden
Total hardness 5,5 ° dH Single value · Asbacher Hütte (Harfenmühle), Breitenthal, Herborn, Herrstein, Mörschied, Niederhosenbach, Niederwörresbach, Oberhosenbach, Oberwörresbach, Veitsrodt, Vollmersbach, Weiden

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Postcodes in this zone: 55626

Bergen, Berschweiler, Dickesbach, Fischbach, Griebelschied, Mittelreidenbach, Oberreidenbach, Schmidthachenbach, Sien, Sienhachenbach, Sonnschied, Wickenrodt

Verbandsgemeindewerke Herrstein-Rhaunen

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

Water hardness
5.6 °dH
Hardness range weich

No core values are available for this zone yet.

Show all recorded parameters (3 — most recent value per parameter)

Further parameters (3)

Further parameters – Bergen, Berschweiler, Dickesbach, Fischbach, Griebelschied, Mittelreidenbach, Oberreidenbach, Schmidthachenbach, Sien, Sienhachenbach, Sonnschied, Wickenrodt
Parameter Value Parametric value Share of the parametric value Reference
Carbonate hardness 0,73 mmol/l Single value · Bergen, Berschweiler, Dickesbach, Fischbach, Griebelschied, Mittelreidenbach, Oberreidenbach, Schmidthachenbach, Sien, Sienhachenbach, Sonnschied, Wickenrodt
Hardness range (WRMG) weich Single value · Bergen, Berschweiler, Dickesbach, Fischbach, Griebelschied, Mittelreidenbach, Oberreidenbach, Schmidthachenbach, Sien, Sienhachenbach, Sonnschied, Wickenrodt
Total hardness 5,6 ° dH Single value · Bergen, Berschweiler, Dickesbach, Fischbach, Griebelschied, Mittelreidenbach, Oberreidenbach, Schmidthachenbach, Sien, Sienhachenbach, Sonnschied, Wickenrodt

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Postcodes in this zone: 55626

Bollenbach, Bundenbach, Hausen, Hochwälder Hof, Hottenbach, Hottenbacher Mühle, Oberkirn, Rhaunen, Stipshausen, Sulzbach, Weitersbach

Verbandsgemeindewerke Herrstein-Rhaunen

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

Water hardness
3.3 °dH
Hardness range weich

No core values are available for this zone yet.

Show all recorded parameters (3 — most recent value per parameter)

Further parameters (3)

Further parameters – Bollenbach, Bundenbach, Hausen, Hochwälder Hof, Hottenbach, Hottenbacher Mühle, Oberkirn, Rhaunen, Stipshausen, Sulzbach, Weitersbach
Parameter Value Parametric value Share of the parametric value Reference
Carbonate hardness 0,44 mmol/l Single value · Bollenbach, Bundenbach, Hausen, Hochwälder Hof, Hottenbach, Hottenbacher Mühle, Oberkirn, Rhaunen, Stipshausen, Sulzbach, Weitersbach
Hardness range (WRMG) weich Single value · Bollenbach, Bundenbach, Hausen, Hochwälder Hof, Hottenbach, Hottenbacher Mühle, Oberkirn, Rhaunen, Stipshausen, Sulzbach, Weitersbach
Total hardness 3,3 ° dH Single value · Bollenbach, Bundenbach, Hausen, Hochwälder Hof, Hottenbach, Hottenbacher Mühle, Oberkirn, Rhaunen, Stipshausen, Sulzbach, Weitersbach

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Postcodes in this zone: 55626

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

Water hardness
5.6 °dH
Hardness range weich

No core values are available for this zone yet.

Show all recorded parameters (3 — most recent value per parameter)

Further parameters (3)

Further parameters – Gerach, Hintertiefenbach
Parameter Value Parametric value Share of the parametric value Reference
Carbonate hardness 0,71 mmol/l Single value · Gerach, Hintertiefenbach
Hardness range (WRMG) weich Single value · Gerach, Hintertiefenbach
Total hardness 5,6 ° dH Single value · Gerach, Hintertiefenbach

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Postcodes in this zone: 55626

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

Water hardness
4.3 °dH
Hardness range weich

No core values are available for this zone yet.

Show all recorded parameters (3 — most recent value per parameter)

Further parameters (3)

Further parameters – Gösenroth, Schwerbach
Parameter Value Parametric value Share of the parametric value Reference
Carbonate hardness 0,68 mmol/l Single value · Gösenroth, Schwerbach
Hardness range (WRMG) weich Single value · Gösenroth, Schwerbach
Total hardness 4,3 ° dH Single value · Gösenroth, Schwerbach

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Postcodes in this zone: 55626

Hettenrodt, Kirschweiler, Mackenrodt

Verbandsgemeindewerke Herrstein-Rhaunen

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

Water hardness
5.4 °dH
Hardness range weich

No core values are available for this zone yet.

Show all recorded parameters (3 — most recent value per parameter)

Further parameters (3)

Further parameters – Hettenrodt, Kirschweiler, Mackenrodt
Parameter Value Parametric value Share of the parametric value Reference
Carbonate hardness 0,69 mmol/l Single value · Hettenrodt, Kirschweiler, Mackenrodt
Hardness range (WRMG) weich Single value · Hettenrodt, Kirschweiler, Mackenrodt
Total hardness 5,4 ° dH Single value · Hettenrodt, Kirschweiler, Mackenrodt

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Postcodes in this zone: 55626

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

Water hardness
2.6 °dH
Hardness range weich

No core values are available for this zone yet.

Show all recorded parameters (3 — most recent value per parameter)

Further parameters (3)

Further parameters – Horbruch, Krummenau
Parameter Value Parametric value Share of the parametric value Reference
Carbonate hardness 0,35 mmol/l Single value · Horbruch, Krummenau
Hardness range (WRMG) weich Single value · Horbruch, Krummenau
Total hardness 2,6 ° dH Single value · Horbruch, Krummenau

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Postcodes in this zone: 55626

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

Water hardness
5.5 °dH
Hardness range weich

No core values are available for this zone yet.

Show all recorded parameters (3 — most recent value per parameter)

Further parameters (3)

Further parameters – Katzenloch
Parameter Value Parametric value Share of the parametric value Reference
Carbonate hardness 0,71 mmol/l Single value · Katzenloch
Hardness range (WRMG) weich Single value · Katzenloch
Total hardness 5,5 ° dH Single value · Katzenloch

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Postcodes in this zone: 55626

Frequently asked questions about drinking water in Bundenbach

How hard is the water in Bundenbach?
TWIST RLP - Stipshausen publishes a total hardness of 0.58 mmol/l for the supply zone Stipshausen — that corresponds to 3.3 °dH. The hardness range is a classification under the German Detergents and Cleaning Products Act (soft below 8,4 °dH, medium 8,4 to 14 °dH, hard above that) and not a quality verdict — it indicates how much calcium and magnesium is dissolved in the water. Basis: Publication by the water supplier, retrieved on 13/07/2026.
How much nitrate is in the drinking water in Bundenbach?
TWIST RLP - Stipshausen publishes a nitrate value of 7.3 mg/L for the supply zone Stipshausen. The statutory parametric value is 50 mg/l; the measured value represents 15 % of the parametric value. Basis: Publication by the water supplier, retrieved on 13/07/2026.
Are PFAS detectable in the drinking water in Bundenbach?
TWIST RLP - Stipshausen publishes for the supply zone Stipshausen a sum value PFAS-20 of 0 µg/L. The statutory parametric value is 0.1 µg/l; the measured value represents 0 % of the parametric value. For the sum of the 20 individual substances, this parametric value has applied since 12/01/2026. Basis: Publication by the water supplier, retrieved on 13/07/2026.
Who supplies the drinking water in Bundenbach?
TWIST RLP - Stipshausen. The values shown here come from the supply zone Stipshausen and apply to the water the supplier delivers. What happens between the building connection and the tap — in old lead pipes, for example — is not covered by these analyses; information on that is provided by owners, the health authority or an examination by an accredited laboratory.

General questions — how current the data is, limit of quantification, parametric values, who is behind this site — are answered under Questions & answers.