Drinking water in Bühlertal
One supply zone, water supplier: Gemeinde Bühlertal.
How to read the share of the parametric value
12 % Share of the parametric value. The proportion of the permitted maximum that the measured value uses — here 12 %, so just over an eighth.
< 10 % * Below the limit of quantification. The substance was not detectable. The mark shows where the detection limit lies relative to the parametric value — the actual share of the parametric value is below that.
Several samples per year: for chemical parameters the mean value is given, for microbiological ones the highest measured value. There the parametric value is zero — a single finding would disappear in the average, and it is precisely that finding which is the information. Which reference applies is stated in the last column of the table.
HB Schafhof (Ausgang Hochbehälter), Gemeinde Bühlertal
Gemeinde BühlertalAssigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.
Water hardness
9 °dH
Hardness range mittel
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Sum of PFAS | 0,000001 mg/l | 0.1 µg/l | 1 % | Single value |
| Nitrate | 12 mg/l | 50 mg/l | 24 % | Single value |
| Lead | < 0,001 mg/l below limit of quantification | 10 µg/l | < 10 % * | Single value |
| Escherichia coli (E. coli) | 0 KBE/100ml | 0/100 ml | — | Single value |
| Sulphate | 17 mg/l | 250 mg/l | 7 % | Single value |
| Sodium | 9,1 mg/l | 200 mg/l | 5 % | Single value |
* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.
Show all recorded parameters (98 — most recent value per parameter)
Microbiology (2)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Escherichia coli (E. coli) | 0 KBE/100ml | 0/100 ml | — | Single value |
| Intestinal enterococci | 0 KBE/100ml | 0/100 ml | — | Single value |
Chemical parameters (46)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| 1,2-dichloroethane | < 0,001 mg/l below limit of quantification | 3 µg/l | < 33 % * | Single value |
| 2,6-Dichlorobenzamide (BAM) | < 0,000025 mg/l below limit of quantification | — | — | Single value |
| Antimony | < 0,001 mg/l below limit of quantification | 5 µg/l | < 20 % * | Single value |
| Arsenic | < 0,001 mg/l below limit of quantification | 10 µg/l | < 10 % * | Single value |
| Atrazine | < 0,000025 mg/l below limit of quantification | — | — | Single value |
| Bentazone | < 0,000025 mg/l below limit of quantification | — | — | Single value |
| Benzene | < 0,0005 mg/l below limit of quantification | 1 µg/l | < 50 % * | Single value |
| Benzo(a)pyrene | < 0,000005 mg/l below limit of quantification | 10 ng/l | < 50 % * | Single value |
| Benzo(b)fluoranthene | < 0,00001 mg/l below limit of quantification | — | — | Single value |
| Benzo(ghi)perylene | < 0,00001 mg/l below limit of quantification | — | — | Single value |
| Benzo(k)fluoranthene | < 0,00001 mg/l below limit of quantification | — | — | Single value |
| Bisphenol A | < 0,0005 mg/l below limit of quantification | 2.5 µg/l | < 20 % * | Single value |
| Boron | < 0,10 mg/l below limit of quantification | 1 mg/l | < 10 % * | Single value |
| Bromate | < 0,0025 mg/l below limit of quantification | 10 µg/l | < 25 % * | Single value |
| Bromodichloromethane | < 0,001 mg/l below limit of quantification | — | — | Single value |
| Cadmium | < 0,0003 mg/l below limit of quantification | 3 µg/l | < 10 % * | Single value |
| Chromium | < 0,0005 mg/l below limit of quantification | 25 µg/l | < 2 % * | Single value |
| Copper | < 0,005 mg/l below limit of quantification | 2 mg/l | < 0.3 % * | Single value |
| Cyanide | < 0,005 mg/l below limit of quantification | 50 µg/l | < 10 % * | Single value |
| Desethylatrazine | < 0,000025 mg/l below limit of quantification | — | — | Single value |
| Desethylterbuthylazine | < 0,000025 mg/l below limit of quantification | — | — | Single value |
| Desisopropylatrazine | < 0,000025 mg/l below limit of quantification | — | — | Single value |
| Dibromochloromethane | < 0,001 mg/l below limit of quantification | — | — | Single value |
| Fluoride | < 0,1 mg/l below limit of quantification | 1.5 mg/l | < 7 % * | Single value |
| Hexazinone | < 0,000025 mg/l below limit of quantification | — | — | Single value |
| Lead | < 0,001 mg/l below limit of quantification | 10 µg/l | < 10 % * | Single value |
| Mercury | < 0,0001 mg/l below limit of quantification | 1 µg/l | < 10 % * | Single value |
| Metalaxyl | < 0,000025 mg/l below limit of quantification | — | — | Single value |
| Metazachlor | < 0,000025 mg/l below limit of quantification | — | — | Single value |
| Metolachlor | < 0,000025 mg/l below limit of quantification | — | — | Single value |
| Nickel | < 0,002 mg/l below limit of quantification | 20 µg/l | < 10 % * | Single value |
| Nitrate | 12 mg/l | 50 mg/l | 24 % | Single value |
| Nitrite | < 0,02 mg/l below limit of quantification | 0.5 mg/l | < 4 % * | Single value |
| Polycyclic aromatic hydrocarbons | < 0,00001 mg/l below limit of quantification | 0.1 µg/l | < 10 % * | Single value |
| Propazine | < 0,000025 mg/l below limit of quantification | — | — | Single value |
| Selenium | < 0,001 mg/l below limit of quantification | 10 µg/l | < 10 % * | Single value |
| Simazine | < 0,000025 mg/l below limit of quantification | — | — | Single value |
| Terbuthylazine | < 0,000025 mg/l below limit of quantification | — | — | Single value |
| Tetrachloroethene | < 0,001 mg/l below limit of quantification | — | — | Single value |
| Tetrachloroethene and Trichloroethene (sum) | < 0,0010 mg/l below limit of quantification | 10 µg/l | < 10 % * | Single value |
| Tribromomethane (bromoform) | < 0,001 mg/l below limit of quantification | — | — | Single value |
| Trichloroethene | < 0,001 mg/l below limit of quantification | — | — | Single value |
| Trichloromethane (chloroform) | < 0,001 mg/l below limit of quantification | — | — | Single value |
| Trihalomethanes — Total | < 0,001 mg/l below limit of quantification | 50 µg/l | < 2 % * | Single value |
| Uranium | < 0,001 mg/l below limit of quantification | 10 µg/l | < 10 % * | Single value |
| Vinyl chloride | < 0,0005 mg/l below limit of quantification | 0.5 µg/l | < 100 % * | Single value |
* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.
PFAS (22)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Perfluorobutane sulfonic acid (PFBS) | 0,000001 mg/l | — | — | Single value |
| Perfluorobutanoic acid (PFBA) | < 0,000001 mg/l below limit of quantification | — | — | Single value |
| Perfluorodecane sulfonic acid (PFDS) | < 0,000001 mg/l below limit of quantification | — | — | Single value |
| Perfluorodecanoic acid (PFDA) | < 0,000001 mg/l below limit of quantification | — | — | Single value |
| Perfluorododecane sulfonic acid (PFDoDS) | < 0,000001 mg/l below limit of quantification | — | — | Single value |
| Perfluorododecanoic acid (PFDoDA) | < 0,000001 mg/l below limit of quantification | — | — | Single value |
| Perfluoroheptane sulfonic acid (PFHpS) | < 0,000001 mg/l below limit of quantification | — | — | Single value |
| Perfluoroheptanoic acid (PFHpA) | < 0,000001 mg/l below limit of quantification | — | — | Single value |
| Perfluorohexane sulfonic acid (PFHxS) | < 0,000001 mg/l below limit of quantification | — | — | Single value |
| Perfluorohexanoic acid (PFHxA) | < 0,000001 mg/l below limit of quantification | — | — | Single value |
| Perfluorononane sulfonic acid (PFNS) | < 0,000001 mg/l below limit of quantification | — | — | Single value |
| Perfluorononanoic acid (PFNA) | < 0,000001 mg/l below limit of quantification | — | — | Single value |
| Perfluorooctanesulfonic acid (PFOS) | < 0,000001 mg/l below limit of quantification | — | — | Single value |
| Perfluorooctanoic acid (PFOA) | < 0,000001 mg/l below limit of quantification | — | — | Single value |
| Perfluoropentanesulfonic acid (PFPeS) | < 0,000001 mg/l below limit of quantification | — | — | Single value |
| Perfluoropentanoic acid (PFPeA) | < 0,000001 mg/l below limit of quantification | — | — | Single value |
| Perfluorotridecanesulfonic acid (PFTrDS) | < 0,000001 mg/l below limit of quantification | — | — | Single value |
| Perfluorotridecanoic acid (PFTrDA) | < 0,000001 mg/l below limit of quantification | — | — | Single value |
| Perfluoroundecanesulfonic acid (PFUnDS) | < 0,000001 mg/l below limit of quantification | — | — | Single value |
| Perfluoroundecanoic acid (PFUnDA) | < 0,000001 mg/l below limit of quantification | — | — | Single value |
| Sum of 4 PFAS | < 0,000001 mg/l below limit of quantification | — | — | Single value |
| Sum of PFAS | 0,000001 mg/l | 0.1 µg/l | 1 % | Single value |
Indicator parameters (19)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Aluminium | < 0,01 mg/l below limit of quantification | 0.2 mg/l | < 5 % * | Single value |
| Ammonium | < 0,05 mg/l below limit of quantification | 0.5 mg/l | < 10 % * | Single value |
| Calcite dissolution capacity | -7,7 mg/l | 5 mg/l CaCO3 | — | Single value |
| Chloride | 14 mg/l | 250 mg/l | 6 % | Single value |
| Coliform bacteria | 0 KBE/100ml | 0/100 ml | — | Single value |
| Colony count 22 °C | 0 KBE/ml | ohne anormale Veränderung | — | Single value |
| Colony count 36 °C | 0 KBE/ml | ohne anormale Veränderung | — | Single value |
| Colour | < 0,1 1/m below limit of quantification | 0.5 m⁻¹ | — | Single value |
| Conductivity (25 °C) | 361 µS/cm | 2,790 µS/cm | — | Single value |
| Iron | < 0,02 mg/l below limit of quantification | 0.2 mg/l | < 10 % * | Single value |
| Manganese | < 0,005 mg/l below limit of quantification | 50 µg/l | < 10 % * | Single value |
| Odour | ohne | für den Verbraucher annehmbar | — | Single value |
| pH | 8,03 | 6,5–9,5 | — | Single value |
| Sodium | 9,1 mg/l | 200 mg/l | 5 % | Single value |
| Sulphate | 17 mg/l | 250 mg/l | 7 % | Single value |
| Taste | ohne | für den Verbraucher annehmbar | — | Single value |
| Temperature | 7,4 °C | — | — | Single value |
| Total organic carbon (TOC) | < 0,50 mg/l below limit of quantification | ohne anormale Veränderung | — | Single value |
| Turbidity | 0,27 NTU | 1 NTU | — | Single value |
* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.
Further parameters (9)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Acid capacity to pH 4.3 | 2,82 mmol/l | — | — | Single value |
| Base capacity to pH 8.2 | < 0,05 mmol/l below limit of quantification | — | — | Single value |
| Calcium | 53 mg/l | — | — | Single value |
| Hardness range (WRMG) | mittel | — | — | Single value |
| Magnesium | 6,1 mg/l | — | — | Single value |
| Oxygen | 11,3 mg O2/l | — | — | Single value |
| Potassium | 1,0 mg/l | — | — | Single value |
| Saturation index | 7,80 | — | — | Single value |
| Total hardness | 1,6 mmol/l | — | — | Single value |
Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.
Source: https://www.buehlertal.de/fileadmin/Dateien/Dateien/Ortsrecht/SKM_C45826032008540.pdf · 13.03.2026 · Entnahme 2026-02-23 10:55, Untersuchungsende 2026-03-13 · retrieved on 08/08/2026
Postcodes in this zone: 77830
Frequently asked questions about drinking water in Bühlertal
- How hard is the water in Bühlertal?
- Gemeinde Bühlertal publishes a total hardness of 1,6 mmol/l for the supply zone HB Schafhof (Ausgang Hochbehälter), Gemeinde Bühlertal — that corresponds to 9 °dH. The hardness range is a classification under the German Detergents and Cleaning Products Act (soft below 8,4 °dH, medium 8,4 to 14 °dH, hard above that) and not a quality verdict — it indicates how much calcium and magnesium is dissolved in the water. Basis: 13.03.2026, retrieved on 08/08/2026.
- How much nitrate is in the drinking water in Bühlertal?
- Gemeinde Bühlertal publishes a nitrate value of 12 mg/l for the supply zone HB Schafhof (Ausgang Hochbehälter), Gemeinde Bühlertal. The statutory parametric value is 50 mg/l; the measured value represents 24 % of the parametric value. Basis: 13.03.2026, retrieved on 08/08/2026.
- Are PFAS detectable in the drinking water in Bühlertal?
- Gemeinde Bühlertal publishes for the supply zone HB Schafhof (Ausgang Hochbehälter), Gemeinde Bühlertal a sum value PFAS-20 of 0,000001 mg/l (0.001 µg/l). The statutory parametric value is 0.1 µg/l; the measured value represents 1 % of the parametric value. For the sum of the 20 individual substances, this parametric value has applied since 12/01/2026. Basis: 13.03.2026, retrieved on 08/08/2026.
- Who supplies the drinking water in Bühlertal?
- Gemeinde Bühlertal. The values shown here come from the supply zone HB Schafhof (Ausgang Hochbehälter), Gemeinde Bühlertal and apply to the water the supplier delivers. What happens between the building connection and the tap — in old lead pipes, for example — is not covered by these analyses; information on that is provided by owners, the health authority or an examination by an accredited laboratory.
General questions — how current the data is, limit of quantification, parametric values, who is behind this site — are answered under Questions & answers.