Skip to content
maunawai.info

Drinking water in Bühl

2 supply zones — values can differ depending on the district. Below is the zone with the most documented parameters, the others collapsed underneath. To determine the exact match, look up the postcode.

How to read the share of the parametric value

12 % Share of the parametric value. The proportion of the permitted maximum that the measured value uses — here 12 %, so just over an eighth.
< 10 % * Below the limit of quantification. The substance was not detectable. The mark shows where the detection limit lies relative to the parametric value — the actual share of the parametric value is below that.

Several samples per year: for chemical parameters the mean value is given, for microbiological ones the highest measured value. There the parametric value is zero — a single finding would disappear in the average, and it is precisely that finding which is the information. Which reference applies is stated in the last column of the table.

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

These values are more than a year old. The most recent analysis the water supplier has published for this zone dates from 03/04/2014. We have no newer values — which is why we show the latest available ones rather than none at all. They say nothing about how the water has changed since then.

Key values Hub/Hard
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 6,90 mg/l 50 mg/l
14 %
Single value · Hub/Hard
Sulphate 11,80 mg/l 250 mg/l
5 %
Single value · Hub/Hard
Sodium 6,80 mg/l 200 mg/l
3 %
Single value · Hub/Hard
Show all recorded parameters (11 — most recent value per parameter)

Chemical parameters (1)

Chemical parameters – Hub/Hard
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 6,90 mg/l 50 mg/l
14 %
Single value · Hub/Hard

Indicator parameters (7)

Indicator parameters – Hub/Hard
Parameter Value Parametric value Share of the parametric value Reference
Ammonium < 0,05 mg/l
below limit of quantification
0.5 mg/l
< 10 % *
Single value · Hub/Hard
Chloride 5,40 mg/l 250 mg/l
2 %
Single value · Hub/Hard
Iron < 0,02 mg/l
below limit of quantification
0.2 mg/l
< 10 % *
Single value · Hub/Hard
Manganese < 0,005 mg/l
below limit of quantification
50 µg/l
< 10 % *
Single value · Hub/Hard
pH 8,15 6,5–9,5 Single value · Hub/Hard
Sodium 6,80 mg/l 200 mg/l
3 %
Single value · Hub/Hard
Sulphate 11,80 mg/l 250 mg/l
5 %
Single value · Hub/Hard

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Further parameters (3)

Further parameters – Hub/Hard
Parameter Value Parametric value Share of the parametric value Reference
Calcium 24,50 mg/l Single value · Hub/Hard
Magnesium 1,10 mg/l Single value · Hub/Hard
Potassium 0,72 mg/l Single value · Hub/Hard

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Source: https://www.ottersweier.de/fileadmin/Dateien/Dateien/Ver-_und_Entsorgung/Trinkwasserwerte.pdf · Untersuchung vom 03.04.2014 · retrieved on 11/07/2026

Postcodes in this zone: 77815

Show 1 more supply zone

Ottersweier, Unzhurst, Breithurst, Hatzenweier, Specklach, Haft

Stadtwerke Bühl GmbH

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

These values are more than a year old. The most recent analysis the water supplier has published for this zone dates from 03/04/2014. We have no newer values — which is why we show the latest available ones rather than none at all. They say nothing about how the water has changed since then.

Key values Ottersweier, Unzhurst, Breithurst, Hatzenweier, Specklach, Haft
Parameter Value Parametric value Share of the parametric value Reference
Nitrate < 2,00 mg/l
below limit of quantification
50 mg/l
< 4 % *
Single value · Ottersweier, Unzhurst, Breithurst, Hatzenweier, Specklach, Haft
Sulphate 13,60 mg/l 250 mg/l
5 %
Single value · Ottersweier, Unzhurst, Breithurst, Hatzenweier, Specklach, Haft
Sodium 3,60 mg/l 200 mg/l
2 %
Single value · Ottersweier, Unzhurst, Breithurst, Hatzenweier, Specklach, Haft

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Show all recorded parameters (9 — most recent value per parameter)

Chemical parameters (1)

Chemical parameters – Ottersweier, Unzhurst, Breithurst, Hatzenweier, Specklach, Haft
Parameter Value Parametric value Share of the parametric value Reference
Nitrate < 2,00 mg/l
below limit of quantification
50 mg/l
< 4 % *
Single value · Ottersweier, Unzhurst, Breithurst, Hatzenweier, Specklach, Haft

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Indicator parameters (5)

Indicator parameters – Ottersweier, Unzhurst, Breithurst, Hatzenweier, Specklach, Haft
Parameter Value Parametric value Share of the parametric value Reference
Ammonium < 0,05 mg/l
below limit of quantification
0.5 mg/l
< 10 % *
Single value · Ottersweier, Unzhurst, Breithurst, Hatzenweier, Specklach, Haft
Manganese < 0,005 mg/l
below limit of quantification
50 µg/l
< 10 % *
Single value · Ottersweier, Unzhurst, Breithurst, Hatzenweier, Specklach, Haft
pH 8,20 6,5–9,5 Single value · Ottersweier, Unzhurst, Breithurst, Hatzenweier, Specklach, Haft
Sodium 3,60 mg/l 200 mg/l
2 %
Single value · Ottersweier, Unzhurst, Breithurst, Hatzenweier, Specklach, Haft
Sulphate 13,60 mg/l 250 mg/l
5 %
Single value · Ottersweier, Unzhurst, Breithurst, Hatzenweier, Specklach, Haft

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Further parameters (3)

Further parameters – Ottersweier, Unzhurst, Breithurst, Hatzenweier, Specklach, Haft
Parameter Value Parametric value Share of the parametric value Reference
Calcium 46,0 mg/l Single value · Ottersweier, Unzhurst, Breithurst, Hatzenweier, Specklach, Haft
Magnesium 5,2 mg/l Single value · Ottersweier, Unzhurst, Breithurst, Hatzenweier, Specklach, Haft
Potassium 0,59 mg/l Single value · Ottersweier, Unzhurst, Breithurst, Hatzenweier, Specklach, Haft

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Source: https://www.ottersweier.de/fileadmin/Dateien/Dateien/Ver-_und_Entsorgung/Trinkwasserwerte.pdf · Untersuchung vom 03.04.2014 · retrieved on 11/07/2026

Postcodes in this zone: 77815

Frequently asked questions about drinking water in Bühl

How much nitrate is in the drinking water in Bühl?
Stadtwerke Bühl GmbH publishes a nitrate value of 6,90 mg/l for the supply zone Hub/Hard. The statutory parametric value is 50 mg/l; the measured value represents 14 % of the parametric value. Basis: Publication by the water supplier, retrieved on 11/07/2026.
Who supplies the drinking water in Bühl?
Stadtwerke Bühl GmbH. The values shown here come from the supply zone Hub/Hard and apply to the water the supplier delivers. What happens between the building connection and the tap — in old lead pipes, for example — is not covered by these analyses; information on that is provided by owners, the health authority or an examination by an accredited laboratory.

General questions — how current the data is, limit of quantification, parametric values, who is behind this site — are answered under Questions & answers.