Skip to content
maunawai.info

Drinking water in Brütten

2 supply zones — values can differ depending on the district. Below is the zone with the most documented parameters, the others collapsed underneath. To determine the exact match, look up the postcode.

How to read the share of the parametric value

12 % Share of the parametric value. The proportion of the permitted maximum that the measured value uses — here 12 %, so just over an eighth.
< 10 % * Below the limit of quantification. The substance was not detectable. The mark shows where the detection limit lies relative to the parametric value — the actual share of the parametric value is below that.

Several samples per year: for chemical parameters the mean value is given, for microbiological ones the highest measured value. There the parametric value is zero — a single finding would disappear in the average, and it is precisely that finding which is the information. Which reference applies is stated in the last column of the table.

Gemeinde Brütten

Wasserversorgung Brütten

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

These values are more than a year old. The most recent analysis the water supplier has published for this zone dates from 31/12/2023. We have no newer values — which is why we show the latest available ones rather than none at all. They say nothing about how the water has changed since then.

Water hardness
18.9 °dH
Hardness range hard
Key values Gemeinde Brütten
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 26.1 mg/l 40 mg/l
65 %
Mean · Gemeinde Brütten
Escherichia coli (E. coli) 0 KBE/100ml 0/100 ml Maximum · Median 0 · Gemeinde Brütten
Sulphate 16.2 mg/l Mean · Gemeinde Brütten
Sodium 18.4 mg/l 200 mg/l
9 %
Mean · Gemeinde Brütten
Show all recorded parameters (14 — most recent value per parameter)

Microbiology (3)

Microbiology – Gemeinde Brütten
Parameter Value Parametric value Share of the parametric value Reference
Aerobic mesophilic bacteria 85 KBE/ml 300 1/ml Mean · Gemeinde Brütten
Escherichia coli (E. coli) 0 KBE/100ml 0/100 ml Maximum · Median 0 · Gemeinde Brütten
Intestinal enterococci 0 KBE/100ml 0/100 ml Maximum · Median 0 · Gemeinde Brütten

Chemical parameters (1)

Chemical parameters – Gemeinde Brütten
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 26.1 mg/l 40 mg/l
65 %
Mean · Gemeinde Brütten

Metabolites (1)

Metabolites – Gemeinde Brütten
Parameter Value Parametric value Share of the parametric value Reference
Chlorothalonil metabolite R471811 0.136 µg/l 0.1 µg/l
136 % Mean above the parametric value
Mean · Gemeinde Brütten

Annual means and medians are not individual measured values, but the parametric values apply per sample. If a mean lies above it, at least one individual sample was above it — the mean does not say how many, or by how much. That is why this is not reported here as an exceedance of the parametric value. What counts remains the water supplier's publication, which each row links to.

Indicator parameters (5)

Indicator parameters – Gemeinde Brütten
Parameter Value Parametric value Share of the parametric value Reference
Chloride 31.1 mg/l Mean · Gemeinde Brütten
Conductivity (25 °C) 762 µS/cm Mean · Gemeinde Brütten
Sodium 18.4 mg/l 200 mg/l
9 %
Mean · Gemeinde Brütten
Sulphate 16.2 mg/l Mean · Gemeinde Brütten
Temperature 15 °C Mean · Gemeinde Brütten

Further parameters (4)

Further parameters – Gemeinde Brütten
Parameter Value Parametric value Share of the parametric value Reference
Calcium 113.2 mg/l Mean · Gemeinde Brütten
Magnesium 19.4 mg/l Mean · Gemeinde Brütten
Potassium 1.1 mg/l Mean · Gemeinde Brütten
Total hardness 33.8 °fH Mean · Gemeinde Brütten

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Postcodes in this zone: 8311

Show 1 more supply zone

WV Gemeinde Hofstätten – Hochbehälter Ablauf (Probestellen-Nr. TW 01)

WV Gemeinde Hofstätten

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

These values are more than a year old. The most recent analysis the water supplier has published for this zone dates from 04/08/2025. We have no newer values — which is why we show the latest available ones rather than none at all. They say nothing about how the water has changed since then.

Key values WV Gemeinde Hofstätten – Hochbehälter Ablauf (Probestellen-Nr. TW 01)
Parameter Value Parametric value Share of the parametric value Reference
Escherichia coli (E. coli) 0 KBE/100ml 0/100 ml Single value
Show all recorded parameters (11 — most recent value per parameter)

Microbiology (2)

Microbiology – WV Gemeinde Hofstätten – Hochbehälter Ablauf (Probestellen-Nr. TW 01)
Parameter Value Parametric value Share of the parametric value Reference
Escherichia coli (E. coli) 0 KBE/100ml 0/100 ml Single value
Intestinal enterococci 0 KBE/100ml 0/100 ml Single value

Indicator parameters (9)

Indicator parameters – WV Gemeinde Hofstätten – Hochbehälter Ablauf (Probestellen-Nr. TW 01)
Parameter Value Parametric value Share of the parametric value Reference
Coliform bacteria 0 KBE/100ml 0/100 ml Single value
Colony count 22 °C 8 KBE/ml 100 1/ml Single value
Colony count 36 °C 1 KBE/ml 20 1/ml Single value
Colour farblos Single value
Conductivity (25 °C) 506 µS/cm 2,500 µS/cm Single value
Odour geruchlos Single value
pH 7,7 6,5–9,5 Single value
Taste nicht durchgeführt
not determined
Single value
Temperature 15,5 grd C Single value

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Source: https://www.hofstaetten.at/0uploads/dateien634.pdf · Untersuchung von-bis: 30.07.2025 - 04.08.2025 · retrieved on 11/08/2026

Postcodes in this zone: 8311

Frequently asked questions about drinking water in Brütten

How hard is the water in Brütten?
Wasserversorgung Brütten publishes a total hardness of 33.8 °fH for the supply zone Gemeinde Brütten — that corresponds to 18.9 °dH. The hardness range is a classification under the German Detergents and Cleaning Products Act (soft below 8,4 °dH, medium 8,4 to 14 °dH, hard above that) and not a quality verdict — it indicates how much calcium and magnesium is dissolved in the water. Basis: 2023, retrieved on 07/08/2026.
How much nitrate is in the drinking water in Brütten?
Wasserversorgung Brütten publishes a nitrate value of 26.1 mg/l for the supply zone Gemeinde Brütten. The statutory parametric value is 40 mg/l; the measured value represents 65 % of the parametric value. Basis: 2023, retrieved on 07/08/2026.
Who supplies the drinking water in Brütten?
Wasserversorgung Brütten. The values shown here come from the supply zone Gemeinde Brütten and apply to the water the supplier delivers. What happens between the building connection and the tap — in old lead pipes, for example — is not covered by these analyses; information on that is provided by owners, the health authority or an examination by an accredited laboratory.

General questions — how current the data is, limit of quantification, parametric values, who is behind this site — are answered under Questions & answers.