Drinking water in Brück, Borkheide u.a.
12 supply zones — values can differ depending on the district. Below is the zone with the most documented parameters, the others collapsed underneath. To determine the exact match, look up the postcode.
How to read the share of the parametric value
Several samples per year: for chemical parameters the mean value is given, for microbiological ones the highest measured value. There the parametric value is zero — a single finding would disappear in the average, and it is precisely that finding which is the information. Which reference applies is stated in the last column of the table.
Laborparameter
WAV Hoher FlämingAssigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Lead | < 0,003 mg/l below limit of quantification | 10 µg/l | < 30 % * | Single value · Laborparameter |
| Sodium | 6,77 mg/l | 200 mg/l | 3 % | Single value · Laborparameter |
* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.
Show all recorded parameters (20 — most recent value per parameter)
Chemical parameters (10)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Antimony | < 0,001 mg/l below limit of quantification | 5 µg/l | < 20 % * | Single value · Laborparameter |
| Arsenic | < 0,003 mg/l below limit of quantification | 10 µg/l | < 30 % * | Single value · Laborparameter |
| Boron | 0,011 mg/l | 1 mg/l | 1 % | Single value · Laborparameter |
| Cadmium | < 0,0005 mg/l below limit of quantification | 3 µg/l | < 17 % * | Single value · Laborparameter |
| Chromium | < 0,002 mg/l below limit of quantification | 25 µg/l | < 8 % * | Single value · Laborparameter |
| Copper | 0,007 mg/l | 2 mg/l | 0.4 % | Single value · Laborparameter |
| Lead | < 0,003 mg/l below limit of quantification | 10 µg/l | < 30 % * | Single value · Laborparameter |
| Mercury | < 0,0002 mg/l below limit of quantification | 1 µg/l | < 20 % * | Single value · Laborparameter |
| Nickel | < 0,003 mg/l below limit of quantification | 20 µg/l | < 15 % * | Single value · Laborparameter |
| Selenium | < 0,003 mg/l below limit of quantification | 10 µg/l | < 30 % * | Single value · Laborparameter |
* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.
Indicator parameters (7)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Aluminium | < 0,01 mg/l below limit of quantification | 0.2 mg/l | < 5 % * | Single value · Laborparameter |
| Iron | 0,003 mg/l | 0.2 mg/l | 2 % | Single value · Laborparameter |
| Manganese | < 0,0006 mg/l below limit of quantification | 50 µg/l | < 1 % * | Single value · Laborparameter |
| pH | 7,48 | 6,5–9,5 | — | Single value · Laborparameter |
| Sodium | 6,77 mg/l | 200 mg/l | 3 % | Single value · Laborparameter |
| Temperature | 16,1 °C | — | — | Single value · Laborparameter |
| Turbidity | 0,35 NTU | 1 NTU | — | Single value · Laborparameter |
* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.
Further parameters (3)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Calcium | 84,3 mg/l | — | — | Single value · Laborparameter |
| Magnesium | 6,88 mg/l | — | — | Single value · Laborparameter |
| Potassium | 1,24 mg/l | — | — | Single value · Laborparameter |
Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.
Postcodes in this zone: 14822
Show 11 more supply zones
Laborparameter Fortsetzung
WAV Hoher FlämingAssigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Nitrate | 0,44 mg/l | 50 mg/l | 0.9 % | Single value · Laborparameter Fortsetzung |
| Sulphate | 72,0 mg/l | 250 mg/l | 29 % | Single value · Laborparameter Fortsetzung |
Show all recorded parameters (15 — most recent value per parameter)
Chemical parameters (8)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Acrylamide | < 0,00001 mg/l below limit of quantification | 0.1 µg/l | < 10 % * | Single value · Laborparameter Fortsetzung |
| Bromate | < 0,001 mg/l below limit of quantification | 10 µg/l | < 10 % * | Single value · Laborparameter Fortsetzung |
| Cyanide | < 0,005 mg/l below limit of quantification | 50 µg/l | < 10 % * | Single value · Laborparameter Fortsetzung |
| Epichlorohydrin | < 0,00001 mg/l below limit of quantification | 0.1 µg/l | < 10 % * | Single value · Laborparameter Fortsetzung |
| Fluoride | 0,13 mg/l | 1.5 mg/l | 9 % | Single value · Laborparameter Fortsetzung |
| Nitrate | 0,44 mg/l | 50 mg/l | 0.9 % | Single value · Laborparameter Fortsetzung |
| Nitrite | < 0,015 mg/l below limit of quantification | 0.5 mg/l | < 3 % * | Single value · Laborparameter Fortsetzung |
| Uranium | < 0,0001 mg/l below limit of quantification | 10 µg/l | < 1 % * | Single value · Laborparameter Fortsetzung |
* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.
Indicator parameters (4)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Ammonium | < 0,03 mg/l below limit of quantification | 0.5 mg/l | < 6 % * | Single value · Laborparameter Fortsetzung |
| Chloride | 21,4 mg/l | 250 mg/l | 9 % | Single value · Laborparameter Fortsetzung |
| Sulphate | 72,0 mg/l | 250 mg/l | 29 % | Single value · Laborparameter Fortsetzung |
| Total organic carbon (TOC) | 0,91 mg/l | ohne anormale Veränderung | — | Single value · Laborparameter Fortsetzung |
* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.
Further parameters (3)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Dissolved organic carbon (DOC) | 0,87 mg/l | — | — | Single value · Laborparameter Fortsetzung |
| Hydrogen carbonate | 177 mg/l | — | — | Single value · Laborparameter Fortsetzung |
| Phosphate | < 0,5 mg/l below limit of quantification | — | — | Single value · Laborparameter Fortsetzung |
Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.
Postcodes in this zone: 14822
Mikrobiologische Parameter
WAV Hoher FlämingAssigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Escherichia coli (E. coli) | 0 KBE/100 ml | 0/100 ml | — | Single value · Mikrobiologische Parameter |
Show all recorded parameters (5 — most recent value per parameter)
Microbiology (2)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Escherichia coli (E. coli) | 0 KBE/100 ml | 0/100 ml | — | Single value · Mikrobiologische Parameter |
| Intestinal enterococci | 0 KBE/100 ml | 0/100 ml | — | Single value · Mikrobiologische Parameter |
Indicator parameters (3)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Coliform bacteria | 0 KBE/100 ml | 0/100 ml | — | Single value · Mikrobiologische Parameter |
| Colony count 22 °C | 0 KBE/1 ml | ohne anormale Veränderung | — | Single value · Mikrobiologische Parameter |
| Colony count 36 °C | 0 KBE/1 ml | ohne anormale Veränderung | — | Single value · Mikrobiologische Parameter |
Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.
Postcodes in this zone: 14822
PFAS-Einzelsubstanz
WAV Hoher FlämingAssigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Sum of PFAS | n.n. mg/l not detectable | — | — | Single value · PFAS-Einzelsubstanz |
Show all recorded parameters (19 — most recent value per parameter)
PFAS (19)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Perfluorobutane sulfonic acid (PFBS) | < 0,000001 mg/l below limit of quantification | — | — | Single value · PFAS-Einzelsubstanz |
| Perfluorobutanoic acid (PFBA) | < 0,000002 mg/l below limit of quantification | — | — | Single value · PFAS-Einzelsubstanz |
| Perfluorodecane sulfonic acid (PFDS) | < 0,000001 mg/l below limit of quantification | — | — | Single value · PFAS-Einzelsubstanz |
| Perfluorodecanoic acid (PFDA) | < 0,000001 mg/l below limit of quantification | — | — | Single value · PFAS-Einzelsubstanz |
| Perfluorododecanoic acid (PFDoDA) | < 0,000001 mg/l below limit of quantification | — | — | Single value · PFAS-Einzelsubstanz |
| Perfluoroheptane sulfonic acid (PFHpS) | < 0,000001 mg/l below limit of quantification | — | — | Single value · PFAS-Einzelsubstanz |
| Perfluoroheptanoic acid (PFHpA) | < 0,000001 mg/l below limit of quantification | — | — | Single value · PFAS-Einzelsubstanz |
| Perfluorohexane sulfonic acid (PFHxS) | < 0,000001 mg/l below limit of quantification | — | — | Single value · PFAS-Einzelsubstanz |
| Perfluorohexanoic acid (PFHxA) | < 0,000001 mg/l below limit of quantification | — | — | Single value · PFAS-Einzelsubstanz |
| Perfluorononane sulfonic acid (PFNS) | < 0,000001 mg/l below limit of quantification | — | — | Single value · PFAS-Einzelsubstanz |
| Perfluorononanoic acid (PFNA) | < 0,000001 mg/l below limit of quantification | — | — | Single value · PFAS-Einzelsubstanz |
| Perfluorooctanesulfonic acid (PFOS) | < 0,000001 mg/l below limit of quantification | — | — | Single value · PFAS-Einzelsubstanz |
| Perfluorooctanoic acid (PFOA) | < 0,000001 mg/l below limit of quantification | — | — | Single value · PFAS-Einzelsubstanz |
| Perfluoropentanesulfonic acid (PFPeS) | < 0,000001 mg/l below limit of quantification | — | — | Single value · PFAS-Einzelsubstanz |
| Perfluoropentanoic acid (PFPeA) | < 0,000002 mg/l below limit of quantification | — | — | Single value · PFAS-Einzelsubstanz |
| Perfluorotridecanoic acid (PFTrDA) | < 0,000001 mg/l below limit of quantification | — | — | Single value · PFAS-Einzelsubstanz |
| Perfluoroundecanoic acid (PFUnDA) | < 0,000001 mg/l below limit of quantification | — | — | Single value · PFAS-Einzelsubstanz |
| Sum of 4 PFAS | n.n. mg/l not detectable | — | — | Single value · PFAS-Einzelsubstanz |
| Sum of PFAS | n.n. mg/l not detectable | — | — | Single value · PFAS-Einzelsubstanz |
Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.
Postcodes in this zone: 14822
Belzig / Bergholz
WAV Hoher FlämingAssigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.
No date is given for these values. The water supplier publishes the analysis without a sampling date and without a report date. When the water was examined is not apparent from the source — we do not add a date and we do not estimate one. What is stated is therefore only when we retrieved the document.
No core values are available for this zone yet.
Show all recorded parameters (3 — most recent value per parameter)
Indicator parameters (1)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| pH | 7,9 | 6,5–9,5 | — | Single value · Belzig / Bergholz |
Further parameters (2)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Hardness range (WRMG) | mittel | — | — | Single value · Belzig / Bergholz |
| Total hardness | 12 °dH | — | — | Single value · Belzig / Bergholz |
Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.
Postcodes in this zone: 14822
Belzig / Kranepuhl
WAV Hoher FlämingAssigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.
No date is given for these values. The water supplier publishes the analysis without a sampling date and without a report date. When the water was examined is not apparent from the source — we do not add a date and we do not estimate one. What is stated is therefore only when we retrieved the document.
No core values are available for this zone yet.
Show all recorded parameters (3 — most recent value per parameter)
Indicator parameters (1)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| pH | 7,8 | 6,5–9,5 | — | Single value · Belzig / Kranepuhl |
Further parameters (2)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Hardness range (WRMG) | mittel | — | — | Single value · Belzig / Kranepuhl |
| Total hardness | 13 °dH | — | — | Single value · Belzig / Kranepuhl |
Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.
Postcodes in this zone: 14822
Belzig / Kuhlowitz
WAV Hoher FlämingAssigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.
No date is given for these values. The water supplier publishes the analysis without a sampling date and without a report date. When the water was examined is not apparent from the source — we do not add a date and we do not estimate one. What is stated is therefore only when we retrieved the document.
No core values are available for this zone yet.
Show all recorded parameters (3 — most recent value per parameter)
Indicator parameters (1)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| pH | 7,8 | 6,5–9,5 | — | Single value · Belzig / Kuhlowitz |
Further parameters (2)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Hardness range (WRMG) | mittel | — | — | Single value · Belzig / Kuhlowitz |
| Total hardness | 13 °dH | — | — | Single value · Belzig / Kuhlowitz |
Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.
Postcodes in this zone: 14822
Belzig / Lüsse
WAV Hoher FlämingAssigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.
No date is given for these values. The water supplier publishes the analysis without a sampling date and without a report date. When the water was examined is not apparent from the source — we do not add a date and we do not estimate one. What is stated is therefore only when we retrieved the document.
No core values are available for this zone yet.
Show all recorded parameters (3 — most recent value per parameter)
Indicator parameters (1)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| pH | 7,6 | 6,5–9,5 | — | Single value · Belzig / Lüsse |
Further parameters (2)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Hardness range (WRMG) | mittel | — | — | Single value · Belzig / Lüsse |
| Total hardness | 12 °dH | — | — | Single value · Belzig / Lüsse |
Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.
Postcodes in this zone: 14822
Belzig / Preußnitz
WAV Hoher FlämingAssigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.
No date is given for these values. The water supplier publishes the analysis without a sampling date and without a report date. When the water was examined is not apparent from the source — we do not add a date and we do not estimate one. What is stated is therefore only when we retrieved the document.
No core values are available for this zone yet.
Show all recorded parameters (3 — most recent value per parameter)
Indicator parameters (1)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| pH | 7,5 | 6,5–9,5 | — | Single value · Belzig / Preußnitz |
Further parameters (2)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Hardness range (WRMG) | mittel | — | — | Single value · Belzig / Preußnitz |
| Total hardness | 13 °dH | — | — | Single value · Belzig / Preußnitz |
Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.
Postcodes in this zone: 14822
Benken / Benken
WAV Hoher FlämingAssigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.
No date is given for these values. The water supplier publishes the analysis without a sampling date and without a report date. When the water was examined is not apparent from the source — we do not add a date and we do not estimate one. What is stated is therefore only when we retrieved the document.
No core values are available for this zone yet.
Show all recorded parameters (3 — most recent value per parameter)
Indicator parameters (1)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| pH | 7,6 | 6,5–9,5 | — | Single value · Benken / Benken |
Further parameters (2)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Hardness range (WRMG) | hart | — | — | Single value · Benken / Benken |
| Total hardness | 14 °dH | — | — | Single value · Benken / Benken |
Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.
Postcodes in this zone: 14822
Benken / Verlorenwasser
WAV Hoher FlämingAssigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.
No date is given for these values. The water supplier publishes the analysis without a sampling date and without a report date. When the water was examined is not apparent from the source — we do not add a date and we do not estimate one. What is stated is therefore only when we retrieved the document.
No core values are available for this zone yet.
Show all recorded parameters (3 — most recent value per parameter)
Indicator parameters (1)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| pH | 7,5 | 6,5–9,5 | — | Single value · Benken / Verlorenwasser |
Further parameters (2)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Hardness range (WRMG) | hart | — | — | Single value · Benken / Verlorenwasser |
| Total hardness | 15 °dH | — | — | Single value · Benken / Verlorenwasser |
Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.
Postcodes in this zone: 14822
Benken / Werbig
WAV Hoher FlämingAssigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.
No date is given for these values. The water supplier publishes the analysis without a sampling date and without a report date. When the water was examined is not apparent from the source — we do not add a date and we do not estimate one. What is stated is therefore only when we retrieved the document.
No core values are available for this zone yet.
Show all recorded parameters (3 — most recent value per parameter)
Indicator parameters (1)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| pH | 7,7 | 6,5–9,5 | — | Single value · Benken / Werbig |
Further parameters (2)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Hardness range (WRMG) | mittel | — | — | Single value · Benken / Werbig |
| Total hardness | 13 °dH | — | — | Single value · Benken / Werbig |
Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.
Postcodes in this zone: 14822
Frequently asked questions about drinking water in Brück, Borkheide u.a.
- Who supplies the drinking water in Brück, Borkheide u.a.?
- WAV Hoher Fläming. The values shown here come from the supply zone Laborparameter and apply to the water the supplier delivers. What happens between the building connection and the tap — in old lead pipes, for example — is not covered by these analyses; information on that is provided by owners, the health authority or an examination by an accredited laboratory.
General questions — how current the data is, limit of quantification, parametric values, who is behind this site — are answered under Questions & answers.