Drinking water in Bruckmühl
One supply zone, water supplier: Markt Bruckmühl (Wasserwerk Markt Bruckmühl).
How to read the share of the parametric value
12 % Share of the parametric value. The proportion of the permitted maximum that the measured value uses — here 12 %, so just over an eighth.
< 10 % * Below the limit of quantification. The substance was not detectable. The mark shows where the detection limit lies relative to the parametric value — the actual share of the parametric value is below that.
Several samples per year: for chemical parameters the mean value is given, for microbiological ones the highest measured value. There the parametric value is zero — a single finding would disappear in the average, and it is precisely that finding which is the information. Which reference applies is stated in the last column of the table.
Wasserwerk Markt Bruckmühl – Hochbehälter Mittenkirchen, Auslauf
Markt Bruckmühl (Wasserwerk Markt Bruckmühl)Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.
Water hardness
20.2 °dH
Hardness range hart
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Nitrate | 3,4 mg/l | 50 mg/l | 7 % | Single value |
| Lead | <0,001 mg/l below limit of quantification | 10 µg/l | < 10 % * | Single value |
| Escherichia coli (E. coli) | 0 KBE/100ml | 0/100 ml | — | Single value |
| Sulphate | 23 mg/l | 250 mg/l | 9 % | Single value |
| Sodium | 8,9 mg/l | 200 mg/l | 4 % | Single value |
* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.
Show all recorded parameters (62 — most recent value per parameter)
Microbiology (2)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Escherichia coli (E. coli) | 0 KBE/100ml | 0/100 ml | — | Single value |
| Intestinal enterococci | 0 KBE/100ml | 0/100 ml | — | Single value |
Chemical parameters (33)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| 1,2-dichloroethane | <0,0005 mg/l below limit of quantification | 3 µg/l | < 17 % * | Single value |
| Antimony | <0,0005 mg/l below limit of quantification | 5 µg/l | < 10 % * | Single value |
| Arsenic | <0,001 mg/l below limit of quantification | 10 µg/l | < 10 % * | Single value |
| Benzene | <0,0001 mg/l below limit of quantification | 1 µg/l | < 10 % * | Single value |
| Benzo(a)pyrene | <0,000002 mg/l below limit of quantification | 10 ng/l | < 20 % * | Single value |
| Benzo(b)fluoranthene | <0,000002 mg/l below limit of quantification | — | — | Single value |
| Benzo(ghi)perylene | <0,000002 mg/l below limit of quantification | — | — | Single value |
| Benzo(k)fluoranthene | <0,000002 mg/l below limit of quantification | — | — | Single value |
| Bisphenol A | <0,000050 (NWG) mg/l not detectable | 2.5 µg/l | — | Single value |
| Boron | 0,02 mg/l | 1 mg/l | 2 % | Single value |
| Bromate | <0,0030 mg/l below limit of quantification | 10 µg/l | < 30 % * | Single value |
| Bromodichloromethane | <0,0002 mg/l below limit of quantification | — | — | Single value |
| Cadmium | <0,0003 mg/l below limit of quantification | 3 µg/l | < 10 % * | Single value |
| Chromium | <0,00050 mg/l below limit of quantification | 25 µg/l | < 2 % * | Single value |
| Copper | <0,005 mg/l below limit of quantification | 2 mg/l | < 0.3 % * | Single value |
| Cyanide | <0,005 mg/l below limit of quantification | 50 µg/l | < 10 % * | Single value |
| Dibromochloromethane | <0,0002 mg/l below limit of quantification | — | — | Single value |
| Fluoride | 0,085 mg/l | 1.5 mg/l | 6 % | Single value |
| Lead | <0,001 mg/l below limit of quantification | 10 µg/l | < 10 % * | Single value |
| Mercury | <0,00010 mg/l below limit of quantification | 1 µg/l | < 10 % * | Single value |
| Nickel | <0,002 mg/l below limit of quantification | 20 µg/l | < 10 % * | Single value |
| Nitrate | 3,4 mg/l | 50 mg/l | 7 % | Single value |
| Nitrite | <0,02 mg/l below limit of quantification | 0.5 mg/l | < 4 % * | Single value |
| Polycyclic aromatic hydrocarbons | 0 mg/l | 0.1 µg/l | 0 % | Single value |
| Selenium | <0,0005 mg/l below limit of quantification | 10 µg/l | < 5 % * | Single value |
| Tetrachloroethene | <0,0001 mg/l below limit of quantification | — | — | Single value |
| Tetrachloroethene and Trichloroethene (sum) | 0 mg/l | 10 µg/l | 0 % | Single value |
| Tribromomethane (bromoform) | <0,0003 mg/l below limit of quantification | — | — | Single value |
| Trichloroethene | <0,0001 mg/l below limit of quantification | — | — | Single value |
| Trichloromethane (chloroform) | <0,0001 mg/l below limit of quantification | — | — | Single value |
| Trihalomethanes — Total | 0 mg/l | 50 µg/l | 0 % | Single value |
| Uranium | 0,0014 mg/l | 10 µg/l | 14 % | Single value |
| Vinyl chloride | <0,0001 mg/l below limit of quantification | 0.5 µg/l | < 20 % * | Single value |
* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.
Indicator parameters (18)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Aluminium | <0,020 mg/l below limit of quantification | 0.2 mg/l | < 10 % * | Single value |
| Ammonium | <0,01 mg/l below limit of quantification | 0.5 mg/l | < 2 % * | Single value |
| Calcite dissolution capacity | -38 mg/l | 5 mg/l CaCO3 | — | Single value |
| Chloride | 12,5 mg/l | 250 mg/l | 5 % | Single value |
| Coliform bacteria | 0 KBE/100ml | 0/100 ml | — | Single value |
| Colony count 22 °C | 0 KBE/ml | ohne anormale Veränderung | — | Single value |
| Colony count 36 °C | 0 KBE/ml | ohne anormale Veränderung | — | Single value |
| Colour | farblos Unit not stated in the document | 0.5 m⁻¹ | — | Single value |
| Conductivity (25 °C) | 677 µS/cm | 2,790 µS/cm | — | Single value |
| Iron | <0,005 mg/l below limit of quantification | 0.2 mg/l | < 3 % * | Single value |
| Manganese | <0,005 mg/l below limit of quantification | 50 µg/l | < 10 % * | Single value |
| Odour | ohne | für den Verbraucher annehmbar | — | Single value |
| pH | 7,37 | 6,5–9,5 | — | Single value |
| Sodium | 8,9 mg/l | 200 mg/l | 4 % | Single value |
| Sulphate | 23 mg/l | 250 mg/l | 9 % | Single value |
| Temperature | 11,6 °C | — | — | Single value |
| Total organic carbon (TOC) | <0,5 mg/l below limit of quantification | ohne anormale Veränderung | — | Single value |
| Turbidity | 0,05 NTU | 1 NTU | — | Single value |
* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.
Further parameters (9)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Acid capacity to pH 4.3 | 6,88 mmol/l | — | — | Single value |
| Base capacity to pH 8.2 | 0,53 mmol/l | — | — | Single value |
| Calcium | 99,8 mg/l | — | — | Single value |
| Carbonate hardness | 19,1 °dH | — | — | Single value |
| Free carbon dioxide | 24 mg/l | — | — | Single value |
| Hardness range (WRMG) | hart | — | — | Single value |
| Magnesium | 26,9 mg/l | — | — | Single value |
| Potassium | 1,8 mg/l | — | — | Single value |
| Total hardness | 3,60 mmol/l | — | — | Single value |
Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.
Source: https://www.bruckmuehl.de/fileadmin/Dateien/Aktuelles/Trinkwasseruntersuchung_2025.pdf · 07.11.2025 · Probenahme 27.10.2025 · retrieved on 11/07/2026
Postcodes in this zone: 83052
Frequently asked questions about drinking water in Bruckmühl
- How hard is the water in Bruckmühl?
- Markt Bruckmühl (Wasserwerk Markt Bruckmühl) publishes a total hardness of 3,60 mmol/l for the supply zone Wasserwerk Markt Bruckmühl – Hochbehälter Mittenkirchen, Auslauf — that corresponds to 20.2 °dH. The hardness range is a classification under the German Detergents and Cleaning Products Act (soft below 8,4 °dH, medium 8,4 to 14 °dH, hard above that) and not a quality verdict — it indicates how much calcium and magnesium is dissolved in the water. Basis: 07.11.2025, retrieved on 11/07/2026.
- How much nitrate is in the drinking water in Bruckmühl?
- Markt Bruckmühl (Wasserwerk Markt Bruckmühl) publishes a nitrate value of 3,4 mg/l for the supply zone Wasserwerk Markt Bruckmühl – Hochbehälter Mittenkirchen, Auslauf. The statutory parametric value is 50 mg/l; the measured value represents 7 % of the parametric value. Basis: 07.11.2025, retrieved on 11/07/2026.
- Who supplies the drinking water in Bruckmühl?
- Markt Bruckmühl (Wasserwerk Markt Bruckmühl). The values shown here come from the supply zone Wasserwerk Markt Bruckmühl – Hochbehälter Mittenkirchen, Auslauf and apply to the water the supplier delivers. What happens between the building connection and the tap — in old lead pipes, for example — is not covered by these analyses; information on that is provided by owners, the health authority or an examination by an accredited laboratory.
General questions — how current the data is, limit of quantification, parametric values, who is behind this site — are answered under Questions & answers.