Drinking water in Briesen, Rauen u.a.
7 supply zones — values can differ depending on the district. Below is the zone with the most documented parameters, the others collapsed underneath. To determine the exact match, look up the postcode.
How to read the share of the parametric value
Several samples per year: for chemical parameters the mean value is given, for microbiological ones the highest measured value. There the parametric value is zero — a single finding would disappear in the average, and it is precisely that finding which is the information. Which reference applies is stated in the last column of the table.
Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.
These values are more than a year old. The most recent analysis the water supplier has published for this zone dates from 31/12/2017. We have no newer values — which is why we show the latest available ones rather than none at all. They say nothing about how the water has changed since then.
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Nitrate | 1,25 mg/l | 50 mg/l | 3 % | Single value · Beerfelde |
| Sulphate | 27,0 mg/l | 250 mg/l | 11 % | Single value · Beerfelde |
| Sodium | 6,50 mg/l | 200 mg/l | 3 % | Single value · Beerfelde |
Show all recorded parameters (22 — most recent value per parameter)
Chemical parameters (6)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Boron | 0,05 mg/l | 1 mg/l | 5 % | Single value · Beerfelde |
| Chromium | <0,005 mg/l below limit of quantification | 25 µg/l | < 20 % * | Single value · Beerfelde |
| Copper | 0,050 mg/l | 2 mg/l | 3 % | Single value · Beerfelde |
| Fluoride | 0,09 mg/l | 1.5 mg/l | 6 % | Single value · Beerfelde |
| Nitrate | 1,25 mg/l | 50 mg/l | 3 % | Single value · Beerfelde |
| Selenium | <0,001 mg/l below limit of quantification | 10 µg/l | < 10 % * | Single value · Beerfelde |
* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.
Indicator parameters (10)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Aluminium | <0,005 mg/l below limit of quantification | 0.2 mg/l | < 3 % * | Single value · Beerfelde |
| Ammonium | <0,05 mg/l below limit of quantification | 0.5 mg/l | < 10 % * | Single value · Beerfelde |
| Chloride | 10,0 mg/l | 250 mg/l | 4 % | Single value · Beerfelde |
| Conductivity (25 °C) | 0,50 mS/cm | 2,790 µS/cm | — | Single value · Beerfelde |
| Iron | 0,02 mg/l | 0.2 mg/l | 10 % | Single value · Beerfelde |
| Manganese | <0,01 mg/l below limit of quantification | 50 µg/l | < 20 % * | Single value · Beerfelde |
| pH | 7,34 | 6,5–9,5 | — | Single value · Beerfelde |
| Sodium | 6,50 mg/l | 200 mg/l | 3 % | Single value · Beerfelde |
| Sulphate | 27,0 mg/l | 250 mg/l | 11 % | Single value · Beerfelde |
| Temperature | 11,3 °C | — | — | Single value · Beerfelde |
* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.
Further parameters (6)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Acid capacity to pH 4.3 | 4,59 mmol/l | — | — | Single value · Beerfelde |
| Calcium | 76,6 mg/l | — | — | Single value · Beerfelde |
| Hardness range (WRMG) | 14,3 °dH | — | — | Single value · Beerfelde |
| Magnesium | 14,4 mg/l | — | — | Single value · Beerfelde |
| Oxygen | 5,4 mg/l | — | — | Single value · Beerfelde |
| Potassium | 2,26 mg/l | — | — | Single value · Beerfelde |
Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.
Postcodes in this zone: 15518
Show 6 more supply zones
Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.
These values are more than a year old. The most recent analysis the water supplier has published for this zone dates from 31/12/2017. We have no newer values — which is why we show the latest available ones rather than none at all. They say nothing about how the water has changed since then.
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Nitrate | 1,01 mg/l | 50 mg/l | 2 % | Single value · Briesen |
| Sulphate | - mg/l not determined | 250 mg/l | — | Single value · Briesen |
| Sodium | 27,20 mg/l | 200 mg/l | 14 % | Single value · Briesen |
Show all recorded parameters (22 — most recent value per parameter)
Chemical parameters (6)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Boron | 0,04 mg/l | 1 mg/l | 4 % | Single value · Briesen |
| Chromium | <0,005 mg/l below limit of quantification | 25 µg/l | < 20 % * | Single value · Briesen |
| Copper | - mg/l not determined | 2 mg/l | — | Single value · Briesen |
| Fluoride | 0,12 mg/l | 1.5 mg/l | 8 % | Single value · Briesen |
| Nitrate | 1,01 mg/l | 50 mg/l | 2 % | Single value · Briesen |
| Selenium | <0,001 mg/l below limit of quantification | 10 µg/l | < 10 % * | Single value · Briesen |
* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.
Indicator parameters (10)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Aluminium | <0,005 mg/l below limit of quantification | 0.2 mg/l | < 3 % * | Single value · Briesen |
| Ammonium | <0,05 mg/l below limit of quantification | 0.5 mg/l | < 10 % * | Single value · Briesen |
| Chloride | 37,0 mg/l | 250 mg/l | 15 % | Single value · Briesen |
| Conductivity (25 °C) | 0,75 mS/cm | 2,790 µS/cm | — | Single value · Briesen |
| Iron | 0,01 mg/l | 0.2 mg/l | 5 % | Single value · Briesen |
| Manganese | <0,01 mg/l below limit of quantification | 50 µg/l | < 20 % * | Single value · Briesen |
| pH | 7,48 | 6,5–9,5 | — | Single value · Briesen |
| Sodium | 27,20 mg/l | 200 mg/l | 14 % | Single value · Briesen |
| Sulphate | - mg/l not determined | 250 mg/l | — | Single value · Briesen |
| Temperature | 11,1 °C | — | — | Single value · Briesen |
* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.
Further parameters (6)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Acid capacity to pH 4.3 | 2,94 mmol/l | — | — | Single value · Briesen |
| Calcium | 109,7 mg/l | — | — | Single value · Briesen |
| Hardness range (WRMG) | 18,4 °dH | — | — | Single value · Briesen |
| Magnesium | 13,3 mg/l | — | — | Single value · Briesen |
| Oxygen | 6,4 mg/l | — | — | Single value · Briesen |
| Potassium | 3,94 mg/l | — | — | Single value · Briesen |
Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.
Postcodes in this zone: 15518
Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.
These values are more than a year old. The most recent analysis the water supplier has published for this zone dates from 31/12/2017. We have no newer values — which is why we show the latest available ones rather than none at all. They say nothing about how the water has changed since then.
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Nitrate | 2,15 mg/l | 50 mg/l | 4 % | Mean |
| Sulphate | 87,45 mg/l | 250 mg/l | 35 % | Mean |
| Sodium | 17,52 mg/l | 200 mg/l | 9 % | Mean |
Show all recorded parameters (22 — most recent value per parameter)
Chemical parameters (6)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Boron | 0,18 mg/l | 1 mg/l | 18 % | Mean |
| Chromium | 0,00 mg/l | 25 µg/l | 0 % | Mean |
| Copper | 0,00 mg/l | 2 mg/l | 0 % | Mean |
| Fluoride | 0,14 mg/l | 1.5 mg/l | 9 % | Mean |
| Nitrate | 2,15 mg/l | 50 mg/l | 4 % | Mean |
| Selenium | 0,00 mg/l | 10 µg/l | 0 % | Mean |
Indicator parameters (10)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Aluminium | 0,01 mg/l | 0.2 mg/l | 5 % | Mean |
| Ammonium | 0,05 mg/l | 0.5 mg/l | 10 % | Mean |
| Chloride | 23,88 mg/l | 250 mg/l | 10 % | Mean |
| Conductivity (25 °C) | 29,89 mS/cm | 2,790 µS/cm | — | Mean |
| Iron | 0,01 mg/l | 0.2 mg/l | 5 % | Mean |
| Manganese | 0,00 mg/l | 50 µg/l | 0 % | Mean |
| pH | 7,17 | 6,5–9,5 | — | Mean |
| Sodium | 17,52 mg/l | 200 mg/l | 9 % | Mean |
| Sulphate | 87,45 mg/l | 250 mg/l | 35 % | Mean |
| Temperature | 11,47 °C | — | — | Mean |
Further parameters (6)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Acid capacity to pH 4.3 | 5,09 mmol/l | — | — | Mean |
| Calcium | 110,15 mg/l | — | — | Mean |
| Hardness range (WRMG) | 18,75 °dH | — | — | Mean |
| Magnesium | 14,55 mg/l | — | — | Mean |
| Oxygen | 5,62 mg/l | — | — | Mean |
| Potassium | 3,24 mg/l | — | — | Mean |
Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.
Postcodes in this zone: 15518
Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.
These values are more than a year old. The most recent analysis the water supplier has published for this zone dates from 31/12/2017. We have no newer values — which is why we show the latest available ones rather than none at all. They say nothing about how the water has changed since then.
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Nitrate | 2,63 mg/l | 50 mg/l | 5 % | Single value · Lebus |
| Sulphate | 24,7 mg/l | 250 mg/l | 10 % | Single value · Lebus |
| Sodium | 30,37 mg/l | 200 mg/l | 15 % | Single value · Lebus |
Show all recorded parameters (22 — most recent value per parameter)
Chemical parameters (6)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Boron | 0,12 mg/l | 1 mg/l | 12 % | Single value · Lebus |
| Chromium | <0005 mg/l below limit of quantification | 25 µg/l | cannot be assessed — the limit of quantification of the measurement is above the parametric value | Single value · Lebus |
| Copper | 0,015 mg/l | 2 mg/l | 0.8 % | Single value · Lebus |
| Fluoride | 0,23 mg/l | 1.5 mg/l | 15 % | Single value · Lebus |
| Nitrate | 2,63 mg/l | 50 mg/l | 5 % | Single value · Lebus |
| Selenium | <0,001 mg/l below limit of quantification | 10 µg/l | < 10 % * | Single value · Lebus |
* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.
Indicator parameters (10)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Aluminium | <0,005 mg/l below limit of quantification | 0.2 mg/l | < 3 % * | Single value · Lebus |
| Ammonium | 0,07 mg/l | 0.5 mg/l | 14 % | Single value · Lebus |
| Chloride | 11,7 mg/l | 250 mg/l | 5 % | Single value · Lebus |
| Conductivity (25 °C) | 0,70 mS/cm | 2,790 µS/cm | — | Single value · Lebus |
| Iron | 0,01 mg/l | 0.2 mg/l | 5 % | Single value · Lebus |
| Manganese | <0,01 mg/l below limit of quantification | 50 µg/l | < 20 % * | Single value · Lebus |
| pH | 7,24 | 6,5–9,5 | — | Single value · Lebus |
| Sodium | 30,37 mg/l | 200 mg/l | 15 % | Single value · Lebus |
| Sulphate | 24,7 mg/l | 250 mg/l | 10 % | Single value · Lebus |
| Temperature | 11,7 °C | — | — | Single value · Lebus |
* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.
Further parameters (6)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Acid capacity to pH 4.3 | 7,20 mmol/l | — | — | Single value · Lebus |
| Calcium | 98,9 mg/l | — | — | Single value · Lebus |
| Hardness range (WRMG) | 17,6 °dH | — | — | Single value · Lebus |
| Magnesium | 16,8 mg/l | — | — | Single value · Lebus |
| Oxygen | 6,3 mg/l | — | — | Single value · Lebus |
| Potassium | 3,82 mg/l | — | — | Single value · Lebus |
Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.
Postcodes in this zone: 15518
Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.
These values are more than a year old. The most recent analysis the water supplier has published for this zone dates from 31/12/2017. We have no newer values — which is why we show the latest available ones rather than none at all. They say nothing about how the water has changed since then.
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Nitrate | 0,74 mg/l | 50 mg/l | 1 % | Single value · Markgrafpieske |
| Sulphate | 37,1 mg/l | 250 mg/l | 15 % | Single value · Markgrafpieske |
| Sodium | 7,65 mg/l | 200 mg/l | 4 % | Single value · Markgrafpieske |
Show all recorded parameters (22 — most recent value per parameter)
Chemical parameters (6)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Boron | 0,02 mg/l | 1 mg/l | 2 % | Single value · Markgrafpieske |
| Chromium | <0,005 mg/l below limit of quantification | 25 µg/l | < 20 % * | Single value · Markgrafpieske |
| Copper | - mg/l not determined | 2 mg/l | — | Single value · Markgrafpieske |
| Fluoride | 0,12 mg/l | 1.5 mg/l | 8 % | Single value · Markgrafpieske |
| Nitrate | 0,74 mg/l | 50 mg/l | 1 % | Single value · Markgrafpieske |
| Selenium | 0,002 mg/l | 10 µg/l | 20 % | Single value · Markgrafpieske |
* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.
Indicator parameters (10)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Aluminium | <0,005 mg/l below limit of quantification | 0.2 mg/l | < 3 % * | Single value · Markgrafpieske |
| Ammonium | <0,05 mg/l below limit of quantification | 0.5 mg/l | < 10 % * | Single value · Markgrafpieske |
| Chloride | 17,9 mg/l | 250 mg/l | 7 % | Single value · Markgrafpieske |
| Conductivity (25 °C) | 0,36 mS/cm | 2,790 µS/cm | — | Single value · Markgrafpieske |
| Iron | 0,01 mg/l | 0.2 mg/l | 5 % | Single value · Markgrafpieske |
| Manganese | <0,01 mg/l below limit of quantification | 50 µg/l | < 20 % * | Single value · Markgrafpieske |
| pH | 7,76 | 6,5–9,5 | — | Single value · Markgrafpieske |
| Sodium | 7,65 mg/l | 200 mg/l | 4 % | Single value · Markgrafpieske |
| Sulphate | 37,1 mg/l | 250 mg/l | 15 % | Single value · Markgrafpieske |
| Temperature | 11,2 °C | — | — | Single value · Markgrafpieske |
* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.
Further parameters (6)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Acid capacity to pH 4.3 | 2,38 mmol/l | — | — | Single value · Markgrafpieske |
| Calcium | 58,1 mg/l | — | — | Single value · Markgrafpieske |
| Hardness range (WRMG) | 9,1 °dH | — | — | Single value · Markgrafpieske |
| Magnesium | 4,8 mg/l | — | — | Single value · Markgrafpieske |
| Oxygen | 10,0 mg/l | — | — | Single value · Markgrafpieske |
| Potassium | 1,11 mg/l | — | — | Single value · Markgrafpieske |
Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.
Postcodes in this zone: 15518
Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.
These values are more than a year old. The most recent analysis the water supplier has published for this zone dates from 31/12/2017. We have no newer values — which is why we show the latest available ones rather than none at all. They say nothing about how the water has changed since then.
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Nitrate | 0,78 mg/l | 50 mg/l | 2 % | Single value · Schönfelde |
| Sulphate | 195,0 mg/l | 250 mg/l | 78 % | Single value · Schönfelde |
| Sodium | 18,35 mg/l | 200 mg/l | 9 % | Single value · Schönfelde |
Show all recorded parameters (22 — most recent value per parameter)
Chemical parameters (6)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Boron | 0,03 mg/l | 1 mg/l | 3 % | Single value · Schönfelde |
| Chromium | <0,005 mg/l below limit of quantification | 25 µg/l | < 20 % * | Single value · Schönfelde |
| Copper | 0,001 mg/l | 2 mg/l | < 0.1 % | Single value · Schönfelde |
| Fluoride | 0,18 mg/l | 1.5 mg/l | 12 % | Single value · Schönfelde |
| Nitrate | 0,78 mg/l | 50 mg/l | 2 % | Single value · Schönfelde |
| Selenium | <0,001 mg/l below limit of quantification | 10 µg/l | < 10 % * | Single value · Schönfelde |
* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.
Indicator parameters (10)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Aluminium | <0,005 mg/l below limit of quantification | 0.2 mg/l | < 3 % * | Single value · Schönfelde |
| Ammonium | <0,05 mg/l below limit of quantification | 0.5 mg/l | < 10 % * | Single value · Schönfelde |
| Chloride | 63,0 mg/l | 250 mg/l | 25 % | Single value · Schönfelde |
| Conductivity (25 °C) | 0,84 mS/cm | 2,790 µS/cm | — | Single value · Schönfelde |
| Iron | 0,03 mg/l | 0.2 mg/l | 15 % | Single value · Schönfelde |
| Manganese | 0,03 mg/l | 50 µg/l | 60 % | Single value · Schönfelde |
| pH | 7,17 | 6,5–9,5 | — | Single value · Schönfelde |
| Sodium | 18,35 mg/l | 200 mg/l | 9 % | Single value · Schönfelde |
| Sulphate | 195,0 mg/l | 250 mg/l | 78 % | Single value · Schönfelde |
| Temperature | 12,7 °C | — | — | Single value · Schönfelde |
* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.
Further parameters (6)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Acid capacity to pH 4.3 | 4,60 mmol/l | — | — | Single value · Schönfelde |
| Calcium | 144,5 mg/l | — | — | Single value · Schönfelde |
| Hardness range (WRMG) | 23,8 °dH | — | — | Single value · Schönfelde |
| Magnesium | 14,8 mg/l | — | — | Single value · Schönfelde |
| Oxygen | 8,2 mg/l | — | — | Single value · Schönfelde |
| Potassium | 15,45 mg/l | — | — | Single value · Schönfelde |
Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.
Postcodes in this zone: 15518
Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.
These values are more than a year old. The most recent analysis the water supplier has published for this zone dates from 31/12/2017. We have no newer values — which is why we show the latest available ones rather than none at all. They say nothing about how the water has changed since then.
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Nitrate | 0,82 mg/l | 50 mg/l | 2 % | Single value · Spreenhagen |
| Sulphate | 145,0 mg/l | 250 mg/l | 58 % | Single value · Spreenhagen |
| Sodium | 15,30 mg/l | 200 mg/l | 8 % | Single value · Spreenhagen |
Show all recorded parameters (22 — most recent value per parameter)
Chemical parameters (6)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Boron | 0,05 mg/l | 1 mg/l | 5 % | Single value · Spreenhagen |
| Chromium | <0,005 mg/l below limit of quantification | 25 µg/l | < 20 % * | Single value · Spreenhagen |
| Copper | 0,092 mg/l | 2 mg/l | 5 % | Single value · Spreenhagen |
| Fluoride | <0,01 mg/l below limit of quantification | 1.5 mg/l | < 0.7 % * | Single value · Spreenhagen |
| Nitrate | 0,82 mg/l | 50 mg/l | 2 % | Single value · Spreenhagen |
| Selenium | 0,002 mg/l | 10 µg/l | 20 % | Single value · Spreenhagen |
* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.
Indicator parameters (10)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Aluminium | <0,005 mg/l below limit of quantification | 0.2 mg/l | < 3 % * | Single value · Spreenhagen |
| Ammonium | <0,05 mg/l below limit of quantification | 0.5 mg/l | < 10 % * | Single value · Spreenhagen |
| Chloride | 38,5 mg/l | 250 mg/l | 15 % | Single value · Spreenhagen |
| Conductivity (25 °C) | 0,58 mS/cm | 2,790 µS/cm | — | Single value · Spreenhagen |
| Iron | 0,01 mg/l | 0.2 mg/l | 5 % | Single value · Spreenhagen |
| Manganese | <0,01 mg/l below limit of quantification | 50 µg/l | < 20 % * | Single value · Spreenhagen |
| pH | 7,41 | 6,5–9,5 | — | Single value · Spreenhagen |
| Sodium | 15,30 mg/l | 200 mg/l | 8 % | Single value · Spreenhagen |
| Sulphate | 145,0 mg/l | 250 mg/l | 58 % | Single value · Spreenhagen |
| Temperature | 11,5 °C | — | — | Single value · Spreenhagen |
* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.
Further parameters (6)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Acid capacity to pH 4.3 | 2,68 mmol/l | — | — | Single value · Spreenhagen |
| Calcium | 93,0 mg/l | — | — | Single value · Spreenhagen |
| Hardness range (WRMG) | 15,5 °dH | — | — | Single value · Spreenhagen |
| Magnesium | 9,8 mg/l | — | — | Single value · Spreenhagen |
| Oxygen | 7,4 mg/l | — | — | Single value · Spreenhagen |
| Potassium | 9,55 mg/l | — | — | Single value · Spreenhagen |
Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.
Postcodes in this zone: 15518
Frequently asked questions about drinking water in Briesen, Rauen u.a.
- How hard is the water in Briesen, Rauen u.a.?
- Zweckverband Wasserversorgung und Abwasserentsorgung Fürstenwalde und Umland publishes the hardness range 14,3 for the supply zone Beerfelde. The hardness range is a classification under the German Detergents and Cleaning Products Act (soft below 8,4 °dH, medium 8,4 to 14 °dH, hard above that) and not a quality verdict — it indicates how much calcium and magnesium is dissolved in the water. Basis: Publication by the water supplier, retrieved on 11/07/2026.
- How much nitrate is in the drinking water in Briesen, Rauen u.a.?
- Zweckverband Wasserversorgung und Abwasserentsorgung Fürstenwalde und Umland publishes a nitrate value of 1,25 mg/l for the supply zone Beerfelde. The statutory parametric value is 50 mg/l; the measured value represents 3 % of the parametric value. Basis: Publication by the water supplier, retrieved on 11/07/2026.
- Who supplies the drinking water in Briesen, Rauen u.a.?
- Zweckverband Wasserversorgung und Abwasserentsorgung Fürstenwalde und Umland. The values shown here come from the supply zone Beerfelde and apply to the water the supplier delivers. What happens between the building connection and the tap — in old lead pipes, for example — is not covered by these analyses; information on that is provided by owners, the health authority or an examination by an accredited laboratory.
General questions — how current the data is, limit of quantification, parametric values, who is behind this site — are answered under Questions & answers.