Skip to content
maunawai.info

Drinking water in Bous

2 supply zones — values can differ depending on the district. Below is the zone with the most documented parameters, the others collapsed underneath. To determine the exact match, look up the postcode.

How to read the share of the parametric value

12 % Share of the parametric value. The proportion of the permitted maximum that the measured value uses — here 12 %, so just over an eighth.
< 10 % * Below the limit of quantification. The substance was not detectable. The mark shows where the detection limit lies relative to the parametric value — the actual share of the parametric value is below that.

Several samples per year: for chemical parameters the mean value is given, for microbiological ones the highest measured value. There the parametric value is zero — a single finding would disappear in the average, and it is precisely that finding which is the information. Which reference applies is stated in the last column of the table.

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

Water hardness
13 °dH
Hardness range Mittel
Key values schwalbach gesamt
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 39,4 mg/l 50 mg/l
79 %
Maximum
Lead < 0,30 µg/l
below limit of quantification
10 µg/l
< 3 % *
Single value
Sulphate 79,8 mg/l 250 mg/l
32 %
Maximum
Sodium 14,1 mg/l 200 mg/l
7 %
Maximum

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Show all recorded parameters (24 — most recent value per parameter)

Chemical parameters (12)

Chemical parameters – schwalbach gesamt
Parameter Value Parametric value Share of the parametric value Reference
Arsenic 3,9 µg/l 10 µg/l
39 %
Maximum
Cadmium < 0,20 µg/l
below limit of quantification
3 µg/l
< 7 % *
Single value
Chromium 0,4 µg/l 25 µg/l
2 %
Maximum
Copper 0,006 mg/l 2 mg/l
0.3 %
Maximum
Cyanide < 0,005 mg/l
below limit of quantification
50 µg/l
< 10 % *
Single value
Fluoride 0,05 mg/l 1.5 mg/l
3 %
Maximum
Lead < 0,30 µg/l
below limit of quantification
10 µg/l
< 3 % *
Single value
Mercury < 0,10 µg/l
below limit of quantification
1 µg/l
< 10 % *
Single value
Nickel 1,9 µg/l 20 µg/l
9 %
Maximum
Nitrate 39,4 mg/l 50 mg/l
79 %
Maximum
Nitrite < 0,005 mg/l
below limit of quantification
0.5 mg/l
< 1 % *
Single value
Pesticides 0,00 µg/l 0.1 µg/l
0 %
Single value

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Indicator parameters (7)

Indicator parameters – schwalbach gesamt
Parameter Value Parametric value Share of the parametric value Reference
Aluminium < 0,010 mg/l
below limit of quantification
0.2 mg/l
< 5 % *
Single value
Chloride 36,4 mg/l 250 mg/l
15 %
Maximum
Iron 0,007 mg/l 0.2 mg/l
3 %
Maximum
Manganese < 0,0020 mg/l
below limit of quantification
50 µg/l
< 4 % *
Single value
pH 8,19 6,5–9,5 Maximum
Sodium 14,1 mg/l 200 mg/l
7 %
Maximum
Sulphate 79,8 mg/l 250 mg/l
32 %
Maximum

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Further parameters (5)

Further parameters – schwalbach gesamt
Parameter Value Parametric value Share of the parametric value Reference
Calcium 60,5 mg/l Maximum
Hardness range (WRMG) Mittel Single value
Magnesium 21,3 mg/l Maximum
Potassium 4,4 mg/l Maximum
Total hardness 13 °DH Maximum

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Source: http://www.gwbs.de/fileadmin/user_upload/Trinkwasseranalyse_der_GWBS_Oktober_2025.pdf · Stand Oktober 2025 · retrieved on 11/07/2026

Postcodes in this zone: 66359

Show 1 more supply zone

wp-gas-und-wasserwerke-bous-schwalbach gesamt

Gas- und Wasserwerke Bous-Schwalbach

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

Water hardness
13 °dH
Hardness range medium
Key values wp-gas-und-wasserwerke-bous-schwalbach gesamt
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 36.9 mg/l 50 mg/l
74 %
Single value
Lead 0.0003 mg/l 10 µg/l
3 %
Single value
Escherichia coli (E. coli) 0 KBE/100 ml 0/100 ml Single value
Sulphate 37.3 mg/l 250 mg/l
15 %
Single value
Sodium 12.9 mg/l 200 mg/l
6 %
Single value
Show all recorded parameters (63 — most recent value per parameter)

Microbiology (2)

Microbiology – wp-gas-und-wasserwerke-bous-schwalbach gesamt
Parameter Value Parametric value Share of the parametric value Reference
Escherichia coli (E. coli) 0 KBE/100 ml 0/100 ml Single value
Intestinal enterococci 0 KBE/100 ml 0/100 ml Single value

Chemical parameters (36)

Chemical parameters – wp-gas-und-wasserwerke-bous-schwalbach gesamt
Parameter Value Parametric value Share of the parametric value Reference
1,2-dichloroethane 0.0002 mg/l 3 µg/l
7 %
Single value
Antimony 0.0003 mg/l 5 µg/l
6 %
Single value
Arsenic 0.0039 mg/l 10 µg/l
39 %
Single value
Atrazine 2e-05 mg/l Single value
Benzene 0.0002 mg/l 1 µg/l
20 %
Single value
Benzo(a)pyrene 1e-06 mg/l 10 ng/l
10 %
Single value
Boron 0.05 mg/l 1 mg/l
5 %
Single value
Bromacil 2e-05 mg/l Single value
Bromate 0.002 mg/l 10 µg/l
20 %
Single value
Cadmium 0.0002 mg/l 3 µg/l
7 %
Single value
Chlorotoluron 2e-05 mg/l Single value
Chromium 0.0005 mg/l 25 µg/l
2 %
Single value
Copper 0.002 mg/l 2 mg/l
0.1 %
Single value
Cyanide 0.005 mg/l 50 µg/l
10 %
Single value
Diuron 2e-05 mg/l Single value
Fluoride 0.05 mg/l 1.5 mg/l
3 %
Single value
Hexazinone 2e-05 mg/l Single value
Isoproturon 2e-05 mg/l Single value
Lead 0.0003 mg/l 10 µg/l
3 %
Single value
Mercury 0.0001 mg/l 1 µg/l
10 %
Single value
Metazachlor 2e-05 mg/l Single value
Methabenzthiazuron 2e-05 mg/l Single value
Metobromuron 2e-05 mg/l Single value
Monuron 2e-05 mg/l Single value
Nickel 0.0017 mg/l 20 µg/l
9 %
Single value
Nitrate 36.9 mg/l 50 mg/l
74 %
Single value
Nitrite 0.005 mg/l 0.5 mg/l
1 %
Single value
Pesticides — Total 2.1e-05 mg/l 0.5 µg/l
4 %
Single value
Propazine 2e-05 mg/l Single value
Selenium 0.0006 mg/l 10 µg/l
6 %
Single value
Simazine 2e-05 mg/l Single value
Terbuthylazine 2e-05 mg/l Single value
Tetrachloroethene 0.0002 mg/l Single value
Trichloroethene 0.0002 mg/l Single value
Trihalomethanes — Total 0 mg/l 50 µg/l
0 %
Single value
Uranium 0.0002 mg/l 10 µg/l
2 %
Single value

Indicator parameters (19)

Indicator parameters – wp-gas-und-wasserwerke-bous-schwalbach gesamt
Parameter Value Parametric value Share of the parametric value Reference
Aluminium 0.01 mg/l 0.2 mg/l
5 %
Single value
Ammonium 0.02 mg/l 0.5 mg/l
4 %
Single value
Calcite dissolution capacity -14 mg/l 5 mg/l CaCO3 Single value
Chloride 36.2 mg/l 250 mg/l
14 %
Single value
Coliform bacteria 0 KBE/100 ml 0/100 ml Single value
Colony count 22 °C 0 KBE/ml ohne anormale Veränderung Single value
Colony count 36 °C 1 KBE/ml ohne anormale Veränderung Single value
Colour 0.1 1/m 0.5 m⁻¹ Single value
Conductivity (25 °C) 549 µS/cm 2,790 µS/cm Single value
Iron 0.005 mg/l 0.2 mg/l
3 %
Single value
Manganese 0.008 mg/l 50 µg/l
16 %
Single value
Odour nein für den Verbraucher annehmbar Single value
pH 8.2 6,5–9,5 Single value
Sodium 12.9 mg/l 200 mg/l
6 %
Single value
Sulphate 37.3 mg/l 250 mg/l
15 %
Single value
Taste ohne für den Verbraucher annehmbar Single value
Temperature 11.4 °C Single value
Total organic carbon (TOC) 1 mg/l ohne anormale Veränderung Single value
Turbidity 0.3 TE/F 1 NTU Single value

Further parameters (6)

Further parameters – wp-gas-und-wasserwerke-bous-schwalbach gesamt
Parameter Value Parametric value Share of the parametric value Reference
Acid capacity to pH 4.3 3.237 mmol/l Single value
Base capacity to pH 8.2 0.003 mmol/l Single value
Calcium 62.6 mg/l Single value
Magnesium 20.5 mg/l Single value
Potassium 4.5 mg/l Single value
Total hardness 13 °dH Single value

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Source: https://oeffentlichkeit.gw-manager.com/gebiete/dab379d2-9363-4a7e-b9c2-2245f5c369c0 · 2025-10-06 · 2025-10-06 · retrieved on 27/07/2026

Postcodes in this zone: 66359

Frequently asked questions about drinking water in Bous

How hard is the water in Bous?
Gas- und Wasserwerke Bous-Schwalbach publishes a total hardness of 13 °dH for the supply zone schwalbach gesamt (hardness range Mittel). The hardness range is a classification under the German Detergents and Cleaning Products Act (soft below 8,4 °dH, medium 8,4 to 14 °dH, hard above that) and not a quality verdict — it indicates how much calcium and magnesium is dissolved in the water. Basis: Stand Oktober 2025, retrieved on 11/07/2026.
How much nitrate is in the drinking water in Bous?
Gas- und Wasserwerke Bous-Schwalbach publishes a nitrate value of 39,4 mg/l for the supply zone schwalbach gesamt. The statutory parametric value is 50 mg/l; the measured value represents 79 % of the parametric value. Basis: Stand Oktober 2025, retrieved on 11/07/2026.
Who supplies the drinking water in Bous?
Gas- und Wasserwerke Bous-Schwalbach. The values shown here come from the supply zone schwalbach gesamt and apply to the water the supplier delivers. What happens between the building connection and the tap — in old lead pipes, for example — is not covered by these analyses; information on that is provided by owners, the health authority or an examination by an accredited laboratory.

General questions — how current the data is, limit of quantification, parametric values, who is behind this site — are answered under Questions & answers.