Drinking water in Böbingen an der Rems
One supply zone, water supplier: Gemeinde Böbingen an der Rems.
How to read the share of the parametric value
Several samples per year: for chemical parameters the mean value is given, for microbiological ones the highest measured value. There the parametric value is zero — a single finding would disappear in the average, and it is precisely that finding which is the information. Which reference applies is stated in the last column of the table.
boebingen-an-der-rems gesamt
Gemeinde Böbingen an der RemsAssigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.
These values are more than a year old. The most recent analysis the water supplier has published for this zone dates from 10/05/2023. We have no newer values — which is why we show the latest available ones rather than none at all. They say nothing about how the water has changed since then.
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Nitrate | 16,9 mg/l | 50 mg/l | 34 % | Single value |
| Sodium | 1,8 mg/l | 200 mg/l | 0.9 % | Single value |
Show all recorded parameters (12 — most recent value per parameter)
Chemical parameters (3)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Cyanide | <0,0050 mg/l below limit of quantification | 50 µg/l | < 10 % * | Single value |
| Fluoride | 0,05 mg/l | 1.5 mg/l | 3 % | Single value |
| Nitrate | 16,9 mg/l | 50 mg/l | 34 % | Single value |
* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.
Indicator parameters (5)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Ammonium | 0,13 mg/l | 0.5 mg/l | 26 % | Single value |
| Chloride | 4,6 mg/l | 250 mg/l | 2 % | Single value |
| Conductivity (25 °C) | 537 μS/cm | 2,790 µS/cm | — | Single value |
| pH | 7,55 | 6,5–9,5 | — | Single value |
| Sodium | 1,8 mg/l | 200 mg/l | 0.9 % | Single value |
Further parameters (4)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Calcium | 89,5 mg/l | — | — | Single value |
| Magnesium | 18,6 mg/l | — | — | Single value |
| Potassium | <0,5 mg/l below limit of quantification | — | — | Single value |
| Total hardness | 16,8 °dH | — | — | Single value |
Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.
Postcodes in this zone: 73560
Frequently asked questions about drinking water in Böbingen an der Rems
- How hard is the water in Böbingen an der Rems?
- Gemeinde Böbingen an der Rems publishes a total hardness of 16.8 °dH for the supply zone boebingen-an-der-rems gesamt (hardness range hard). The hardness range is a classification under the German Detergents and Cleaning Products Act (soft below 8,4 °dH, medium 8,4 to 14 °dH, hard above that) and not a quality verdict — it indicates how much calcium and magnesium is dissolved in the water. Basis: 10.05.2023, retrieved on 08/08/2026.
- How much nitrate is in the drinking water in Böbingen an der Rems?
- Gemeinde Böbingen an der Rems publishes a nitrate value of 16,9 mg/l for the supply zone boebingen-an-der-rems gesamt. The statutory parametric value is 50 mg/l; the measured value represents 34 % of the parametric value. Basis: 10.05.2023, retrieved on 08/08/2026.
- Who supplies the drinking water in Böbingen an der Rems?
- Gemeinde Böbingen an der Rems. The values shown here come from the supply zone boebingen-an-der-rems gesamt and apply to the water the supplier delivers. What happens between the building connection and the tap — in old lead pipes, for example — is not covered by these analyses; information on that is provided by owners, the health authority or an examination by an accredited laboratory.
General questions — how current the data is, limit of quantification, parametric values, who is behind this site — are answered under Questions & answers.