Skip to content
maunawai.info

Drinking water in Biessenhofen

One supply zone, water supplier: Wasserversorgung Gem. Biessenhofen.

How to read the share of the parametric value

12 % Share of the parametric value. The proportion of the permitted maximum that the measured value uses — here 12 %, so just over an eighth.
< 10 % * Below the limit of quantification. The substance was not detectable. The mark shows where the detection limit lies relative to the parametric value — the actual share of the parametric value is below that.

Several samples per year: for chemical parameters the mean value is given, for microbiological ones the highest measured value. There the parametric value is zero — a single finding would disappear in the average, and it is precisely that finding which is the information. Which reference applies is stated in the last column of the table.

Biessenhofener Wasserversorgung

Wasserversorgung Gem. Biessenhofen

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

Water hardness
19.1 °dH
Hardness range hart
Key values Biessenhofener Wasserversorgung
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 12 mg/l 50 mg/l
24 %
Single value
Lead 0,001 mg/l 10 µg/l
10 %
Single value
Escherichia coli (E. coli) 0 1/100ml 0/100 ml Single value
Sulphate 7,2 mg/l 250 mg/l
3 %
Single value
Sodium 17 mg/l 200 mg/l
9 %
Single value
Show all recorded parameters (54 — most recent value per parameter)

Microbiology (2)

Microbiology – Biessenhofener Wasserversorgung
Parameter Value Parametric value Share of the parametric value Reference
Escherichia coli (E. coli) 0 1/100ml 0/100 ml Single value
Intestinal enterococci 0 KBE/100ml 0/100 ml Single value

Chemical parameters (27)

Chemical parameters – Biessenhofener Wasserversorgung
Parameter Value Parametric value Share of the parametric value Reference
1,2-dichloroethane <0,2 µg/l
below limit of quantification
3 µg/l
< 7 % *
Single value
Antimony <0,001 mg/l
below limit of quantification
5 µg/l
< 20 % *
Single value
Arsenic <0,001 mg/l
below limit of quantification
10 µg/l
< 10 % *
Single value
Benzene <0,2 µg/l
below limit of quantification
1 µg/l
< 20 % *
Single value
Benzo(a)pyrene <0,001 µg/l
below limit of quantification
10 ng/l
< 10 % *
Single value
Benzo(b)fluoranthene <0,002 µg/l
below limit of quantification
Single value
Benzo(ghi)perylene <0,002 µg/l
below limit of quantification
Single value
Benzo(k)fluoranthene <0,002 µg/l
below limit of quantification
Single value
Bisphenol A <0,4 µg/l
below limit of quantification
2.5 µg/l
< 16 % *
Single value
Boron <0,1 mg/l
below limit of quantification
1 mg/l
< 10 % *
Single value
Bromate <0,0025 mg/l
below limit of quantification
10 µg/l
< 25 % *
Single value
Cadmium <0,0001 mg/l
below limit of quantification
3 µg/l
< 3 % *
Single value
Chromium <0,0008 mg/l
below limit of quantification
25 µg/l
< 3 % *
Single value
Copper 0,007 mg/l 2 mg/l
0.4 %
Single value
Cyanide <0,002 mg/l
below limit of quantification
50 µg/l
< 4 % *
Single value
Fluoride <0,1 mg/l
below limit of quantification
1.5 mg/l
< 7 % *
Single value
Indeno(1,2,3-cd)pyrene <0,002 µg/l
below limit of quantification
Single value
Lead 0,001 mg/l 10 µg/l
10 %
Single value
Mercury <0,0001 mg/l
below limit of quantification
1 µg/l
< 10 % *
Single value
Nickel <0,002 mg/l
below limit of quantification
20 µg/l
< 10 % *
Single value
Nitrate 12 mg/l 50 mg/l
24 %
Single value
Nitrite <0,005 mg/l
below limit of quantification
0.5 mg/l
< 1 % *
Single value
Selenium <0,002 mg/l
below limit of quantification
10 µg/l
< 20 % *
Single value
Tetrachloroethene <0,2 µg/l
below limit of quantification
Single value
Tetrachloroethene and Trichloroethene (sum) n.n. µg/l
not detectable
10 µg/l Single value
Trichloroethene <0,2 µg/l
below limit of quantification
Single value
Uranium <0,001 mg/l
below limit of quantification
10 µg/l
< 10 % *
Single value

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Indicator parameters (16)

Indicator parameters – Biessenhofener Wasserversorgung
Parameter Value Parametric value Share of the parametric value Reference
Aluminium <0,02 mg/l
below limit of quantification
0.2 mg/l
< 10 % *
Single value
Ammonium <0,05 mg/l
below limit of quantification
0.5 mg/l
< 10 % *
Single value
Calcite dissolution capacity -27,1 mg/l 5 mg/l CaCO3 Single value
Chloride 24 mg/l 250 mg/l
10 %
Single value
Colour farblos
Unit not stated in the document
0.5 m⁻¹ Single value
Conductivity (25 °C) 704 µS/cm 2,790 µS/cm Single value
Iron <0,01 mg/l
below limit of quantification
0.2 mg/l
< 5 % *
Single value
Manganese <0,005 mg/l
below limit of quantification
50 µg/l
< 10 % *
Single value
Odour ohne für den Verbraucher annehmbar Single value
pH 7,29 6,5–9,5 Single value
Sodium 17 mg/l 200 mg/l
9 %
Single value
Sulphate 7,2 mg/l 250 mg/l
3 %
Single value
Taste ohne für den Verbraucher annehmbar Single value
Temperature 17,5 °C Single value
Total organic carbon (TOC) 1,6 mg/l ohne anormale Veränderung Single value
Turbidity <0,1 FNU
below limit of quantification
1 NTU Single value

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Further parameters (9)

Further parameters – Biessenhofener Wasserversorgung
Parameter Value Parametric value Share of the parametric value Reference
Acid capacity to pH 4.3 6,52 mmol/l Single value
Base capacity to pH 8.2 0,73 mmol/l Single value
Calcium 96 mg/l Single value
Hardness range (WRMG) hart Single value
Magnesium 24 mg/l Single value
Potassium 2,1 mg/l Single value
Sum of anion equivalents 7,54 mval/l Single value
Sum of cation equivalents 7,57 mval/l Single value
Total hardness 3,4 mmol/l Single value

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Postcodes in this zone: 87640

Frequently asked questions about drinking water in Biessenhofen

How hard is the water in Biessenhofen?
Wasserversorgung Gem. Biessenhofen publishes a total hardness of 3,4 mmol/l for the supply zone Biessenhofener Wasserversorgung — that corresponds to 19.1 °dH. The hardness range is a classification under the German Detergents and Cleaning Products Act (soft below 8,4 °dH, medium 8,4 to 14 °dH, hard above that) and not a quality verdict — it indicates how much calcium and magnesium is dissolved in the water. Basis: Publication by the water supplier, retrieved on 08/08/2026.
How much nitrate is in the drinking water in Biessenhofen?
Wasserversorgung Gem. Biessenhofen publishes a nitrate value of 12 mg/l for the supply zone Biessenhofener Wasserversorgung. The statutory parametric value is 50 mg/l; the measured value represents 24 % of the parametric value. Basis: Publication by the water supplier, retrieved on 08/08/2026.
Who supplies the drinking water in Biessenhofen?
Wasserversorgung Gem. Biessenhofen. The values shown here come from the supply zone Biessenhofener Wasserversorgung and apply to the water the supplier delivers. What happens between the building connection and the tap — in old lead pipes, for example — is not covered by these analyses; information on that is provided by owners, the health authority or an examination by an accredited laboratory.

General questions — how current the data is, limit of quantification, parametric values, who is behind this site — are answered under Questions & answers.