How hard is the water in Berghaupten?

Berghaupten publishes a total hardness of 0,6 mmol/l for the supply zone Berghaupten — that corresponds to 3.4 °dH. The hardness range is a classification under the German Detergents and Cleaning Products Act (soft below 8,4 °dH, medium 8,4 to 14 °dH, hard above that) and not a quality verdict — it indicates how much calcium and magnesium is dissolved in the water. Basis: Publication by the water supplier, retrieved on 08/08/2026.

Who supplies the drinking water in Berghaupten?

Berghaupten. The values shown here come from the supply zone Berghaupten and apply to the water the supplier delivers. What happens between the building connection and the tap — in old lead pipes, for example — is not covered by these analyses; information on that is provided by owners, the health authority or an examination by an accredited laboratory.

Drinking water in Berghaupten

One supply zone, water supplier: Berghaupten.

How to read the share of the parametric value

12 % Share of the parametric value. The proportion of the permitted maximum that the measured value uses — here 12 %, so just over an eighth.

< 10 % * Below the limit of quantification. The substance was not detectable. The mark shows where the detection limit lies relative to the parametric value — the actual share of the parametric value is below that.

Several samples per year: for chemical parameters the mean value is given, for microbiological ones the highest measured value. There the parametric value is zero — a single finding would disappear in the average, and it is precisely that finding which is the information. Which reference applies is stated in the last column of the table.

Berghaupten

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

No date is given for these values. The water supplier publishes the analysis without a sampling date and without a report date. When the water was examined is not apparent from the source — we do not add a date and we do not estimate one. What is stated is therefore only when we retrieved the document.

Water hardness

3.4 °dH

Hardness range weich

No core values are available for this zone yet.

Show all recorded parameters (3 — most recent value per parameter)

Indicator parameters (1)

Indicator parameters – Berghaupten
Parameter	Value	Parametric value	Share of the parametric value	Reference
pH	7,75	6,5–9,5	—	Single value · Berghaupten

Further parameters (2)

Further parameters – Berghaupten
Parameter	Value	Parametric value	Share of the parametric value	Reference
Hardness range (WRMG)	weich	—	—	Single value · Berghaupten
Total hardness	0,6 mmol/l	—	—	Single value · Berghaupten

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Source: https://www.berghaupten.de/gemeinde--politik/einrichtungen/ver--und-entsorgung/trinkwasser · retrieved on 08/08/2026

Postcodes in this zone: 77791

Frequently asked questions about drinking water in Berghaupten

How hard is the water in Berghaupten?: Berghaupten publishes a total hardness of 0,6 mmol/l for the supply zone Berghaupten — that corresponds to 3.4 °dH. The hardness range is a classification under the German Detergents and Cleaning Products Act (soft below 8,4 °dH, medium 8,4 to 14 °dH, hard above that) and not a quality verdict — it indicates how much calcium and magnesium is dissolved in the water. Basis: Publication by the water supplier, retrieved on 08/08/2026.
Who supplies the drinking water in Berghaupten?: Berghaupten. The values shown here come from the supply zone Berghaupten and apply to the water the supplier delivers. What happens between the building connection and the tap — in old lead pipes, for example — is not covered by these analyses; information on that is provided by owners, the health authority or an examination by an accredited laboratory.

General questions — how current the data is, limit of quantification, parametric values, who is behind this site — are answered under Questions & answers.