Skip to content
maunawai.info

Drinking water in Bennwil

2 supply zones — values can differ depending on the district. Below is the zone with the most documented parameters, the others collapsed underneath. To determine the exact match, look up the postcode.

How to read the share of the parametric value

12 % Share of the parametric value. The proportion of the permitted maximum that the measured value uses — here 12 %, so just over an eighth.
< 10 % * Below the limit of quantification. The substance was not detectable. The mark shows where the detection limit lies relative to the parametric value — the actual share of the parametric value is below that.

Several samples per year: for chemical parameters the mean value is given, for microbiological ones the highest measured value. There the parametric value is zero — a single finding would disappear in the average, and it is precisely that finding which is the information. Which reference applies is stated in the last column of the table.

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

Water hardness
16.5 °dH
Hardness range hard
Key values Bennwil
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 9.52 mg/l 40 mg/l
24 %
Mean · Bennwil
Escherichia coli (E. coli) nn
not detectable
Unit not stated in the document
0/100 ml Maximum · Median 0 · Bennwil
Sulphate 45.7 mg/l Mean · Bennwil
Sodium 3.39 mg/l 200 mg/l
2 %
Mean · Bennwil
Show all recorded parameters (15 — most recent value per parameter)

Microbiology (3)

Microbiology – Bennwil
Parameter Value Parametric value Share of the parametric value Reference
Aerobic mesophilic bacteria 3 KBE/ml 300 1/ml Mean · Bennwil
Escherichia coli (E. coli) nn
not detectable
Unit not stated in the document
0/100 ml Maximum · Median 0 · Bennwil
Intestinal enterococci nn
not detectable
Unit not stated in the document
0/100 ml Maximum · Median 0 · Bennwil

Chemical parameters (2)

Chemical parameters – Bennwil
Parameter Value Parametric value Share of the parametric value Reference
Fluoride 0.09 mg/l 1.5 mg/l
6 %
Mean · Bennwil
Nitrate 9.52 mg/l 40 mg/l
24 %
Mean · Bennwil

Indicator parameters (7)

Indicator parameters – Bennwil
Parameter Value Parametric value Share of the parametric value Reference
Chloride 2.66 mg/l Mean · Bennwil
Conductivity (25 °C) 533 µS/cm Mean · Bennwil
pH 7.78 Mean · Bennwil
Sodium 3.39 mg/l 200 mg/l
2 %
Mean · Bennwil
Sulphate 45.7 mg/l Mean · Bennwil
Temperature 17.5 °C Mean · Bennwil
Turbidity 0.42 TE/F Mean · Bennwil

Further parameters (3)

Further parameters – Bennwil
Parameter Value Parametric value Share of the parametric value Reference
Calcium 94.4 mg/l Mean · Bennwil
Magnesium 14.1 mg/l Mean · Bennwil
Total hardness 29.4 °fH Mean · Bennwil

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Source: https://trinkwasser.ch/de/versorger/1584/wasserversorgung-bennwil/3326/bennwil · 2025 · 2025 · retrieved on 07/08/2026

Postcodes in this zone: 4431

Show 1 more supply zone

Haidershofen

Haidershofen

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

These values are more than a year old. The most recent analysis the water supplier has published for this zone dates from 30/11/2023. We have no newer values — which is why we show the latest available ones rather than none at all. They say nothing about how the water has changed since then.

Water hardness
19 °dH
Hardness range hard
Key values Haidershofen
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 17 mg/l 50 mg/l
34 %
Single value
Sulphate 15,3 mg/l 250 mg/l
6 %
Single value
Sodium 5,9 mg/l 200 mg/l
3 %
Single value
Show all recorded parameters (8 — most recent value per parameter)

Chemical parameters (1)

Chemical parameters – Haidershofen
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 17 mg/l 50 mg/l
34 %
Single value

Indicator parameters (4)

Indicator parameters – Haidershofen
Parameter Value Parametric value Share of the parametric value Reference
Chloride 10,7 mg/l 200 mg/l
5 %
Single value
pH 7,51 6,5–9,5 Single value
Sodium 5,9 mg/l 200 mg/l
3 %
Single value
Sulphate 15,3 mg/l 250 mg/l
6 %
Single value

Further parameters (3)

Further parameters – Haidershofen
Parameter Value Parametric value Share of the parametric value Reference
Magnesium 27,5 mg/l 150 mg/l
18 %
Single value
Potassium 2,1 mg/l 50 mg/l
4 %
Single value
Total hardness 19 °dH Single value

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Postcodes in this zone: 4431

Frequently asked questions about drinking water in Bennwil

How hard is the water in Bennwil?
Wasserversorgung Bennwil publishes a total hardness of 29.4 °fH for the supply zone Bennwil — that corresponds to 16.5 °dH. The hardness range is a classification under the German Detergents and Cleaning Products Act (soft below 8,4 °dH, medium 8,4 to 14 °dH, hard above that) and not a quality verdict — it indicates how much calcium and magnesium is dissolved in the water. Basis: 2025, retrieved on 07/08/2026.
How much nitrate is in the drinking water in Bennwil?
Wasserversorgung Bennwil publishes a nitrate value of 9.52 mg/l for the supply zone Bennwil. The statutory parametric value is 40 mg/l; the measured value represents 24 % of the parametric value. Basis: 2025, retrieved on 07/08/2026.
Who supplies the drinking water in Bennwil?
Wasserversorgung Bennwil. The values shown here come from the supply zone Bennwil and apply to the water the supplier delivers. What happens between the building connection and the tap — in old lead pipes, for example — is not covered by these analyses; information on that is provided by owners, the health authority or an examination by an accredited laboratory.

General questions — how current the data is, limit of quantification, parametric values, who is behind this site — are answered under Questions & answers.