How hard is the water in Benken SG?

Wasserkorporation Benken (SG) publishes a total hardness of 32 °fH for the supply zone Benken SG — that corresponds to 17.9 °dH. The hardness range is a classification under the German Detergents and Cleaning Products Act (soft below 8,4 °dH, medium 8,4 to 14 °dH, hard above that) and not a quality verdict — it indicates how much calcium and magnesium is dissolved in the water. Basis: 2025, retrieved on 07/08/2026.

How much nitrate is in the drinking water in Benken SG?

Wasserkorporation Benken (SG) publishes a nitrate value of 4 mg/l for the supply zone Benken SG. The statutory parametric value is 40 mg/l; the measured value represents 10 % of the parametric value. Basis: 2025, retrieved on 07/08/2026.

Who supplies the drinking water in Benken SG?

Wasserkorporation Benken (SG). The values shown here come from the supply zone Benken SG and apply to the water the supplier delivers. What happens between the building connection and the tap — in old lead pipes, for example — is not covered by these analyses; information on that is provided by owners, the health authority or an examination by an accredited laboratory.

Drinking water in Benken SG

One supply zone, water supplier: Wasserkorporation Benken (SG).

How to read the share of the parametric value

12 % Share of the parametric value. The proportion of the permitted maximum that the measured value uses — here 12 %, so just over an eighth.

< 10 % * Below the limit of quantification. The substance was not detectable. The mark shows where the detection limit lies relative to the parametric value — the actual share of the parametric value is below that.

Several samples per year: for chemical parameters the mean value is given, for microbiological ones the highest measured value. There the parametric value is zero — a single finding would disappear in the average, and it is precisely that finding which is the information. Which reference applies is stated in the last column of the table.

Benken SG

Wasserkorporation Benken (SG)

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

Water hardness

17.9 °dH

Hardness range hard

Key values Benken SG
Parameter	Value	Parametric value	Share of the parametric value	Reference
Nitrate	4 mg/l	40 mg/l	10 %	Mean · Benken SG
Escherichia coli (E. coli)	0 KBE/100ml	0/100 ml	—	Maximum · Median 0 · Benken SG

Show all recorded parameters (7 — most recent value per parameter)

Microbiology (3)

Microbiology – Benken SG
Parameter	Value	Parametric value	Share of the parametric value	Reference
Aerobic mesophilic bacteria	8.2 KBE/ml	300 1/ml	—	Mean · Benken SG
Escherichia coli (E. coli)	0 KBE/100ml	0/100 ml	—	Maximum · Median 0 · Benken SG
Intestinal enterococci	0 KBE/100ml	0/100 ml	—	Maximum · Median 0 · Benken SG

Chemical parameters (1)

Chemical parameters – Benken SG
Parameter	Value	Parametric value	Share of the parametric value	Reference
Nitrate	4 mg/l	40 mg/l	10 %	Mean · Benken SG

Further parameters (3)

Further parameters – Benken SG
Parameter	Value	Parametric value	Share of the parametric value	Reference
Calcium	103.5 mg/l	—	—	Mean · Benken SG
Magnesium	15.5 mg/l	—	—	Mean · Benken SG
Total hardness	32 °fH	—	—	Mean · Benken SG

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Source: https://trinkwasser.ch/de/versorger/987/wasserkorporation-benken-sg/3277/benken-sg · 2025 · 2025 · retrieved on 07/08/2026

Postcodes in this zone: 8717

Frequently asked questions about drinking water in Benken SG

How hard is the water in Benken SG?: Wasserkorporation Benken (SG) publishes a total hardness of 32 °fH for the supply zone Benken SG — that corresponds to 17.9 °dH. The hardness range is a classification under the German Detergents and Cleaning Products Act (soft below 8,4 °dH, medium 8,4 to 14 °dH, hard above that) and not a quality verdict — it indicates how much calcium and magnesium is dissolved in the water. Basis: 2025, retrieved on 07/08/2026.
How much nitrate is in the drinking water in Benken SG?: Wasserkorporation Benken (SG) publishes a nitrate value of 4 mg/l for the supply zone Benken SG. The statutory parametric value is 40 mg/l; the measured value represents 10 % of the parametric value. Basis: 2025, retrieved on 07/08/2026.
Who supplies the drinking water in Benken SG?: Wasserkorporation Benken (SG). The values shown here come from the supply zone Benken SG and apply to the water the supplier delivers. What happens between the building connection and the tap — in old lead pipes, for example — is not covered by these analyses; information on that is provided by owners, the health authority or an examination by an accredited laboratory.

General questions — how current the data is, limit of quantification, parametric values, who is behind this site — are answered under Questions & answers.