Skip to content
maunawai.info

Drinking water in Bellikon

One supply zone, water supplier: WV Bellikon.

How to read the share of the parametric value

12 % Share of the parametric value. The proportion of the permitted maximum that the measured value uses — here 12 %, so just over an eighth.
< 10 % * Below the limit of quantification. The substance was not detectable. The mark shows where the detection limit lies relative to the parametric value — the actual share of the parametric value is below that.

Several samples per year: for chemical parameters the mean value is given, for microbiological ones the highest measured value. There the parametric value is zero — a single finding would disappear in the average, and it is precisely that finding which is the information. Which reference applies is stated in the last column of the table.

Gemeinde Bellikon

WV Bellikon

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

Water hardness
17.9 °dH
Hardness range hard
Key values Gemeinde Bellikon
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 23.2 mg/l 40 mg/l
58 %
Mean · Gemeinde Bellikon
Escherichia coli (E. coli) nn
not detectable
Unit not stated in the document
0/100 ml Maximum · Median nn · Gemeinde Bellikon
Show all recorded parameters (13 — most recent value per parameter)

Microbiology (3)

Microbiology – Gemeinde Bellikon
Parameter Value Parametric value Share of the parametric value Reference
Aerobic mesophilic bacteria nn
not detectable
Unit not stated in the document
300 1/ml Mean · Gemeinde Bellikon
Escherichia coli (E. coli) nn
not detectable
Unit not stated in the document
0/100 ml Maximum · Median nn · Gemeinde Bellikon
Intestinal enterococci nn
not detectable
Unit not stated in the document
0/100 ml Maximum · Median nn · Gemeinde Bellikon

Chemical parameters (1)

Chemical parameters – Gemeinde Bellikon
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 23.2 mg/l 40 mg/l
58 %
Mean · Gemeinde Bellikon

PFAS (3)

PFAS – Gemeinde Bellikon
Parameter Value Parametric value Share of the parametric value Reference
Perfluorohexane sulfonic acid (PFHxS) < 0.001 µg/l
below limit of quantification
0.3 µg/l
< 0.3 % *
Mean · Gemeinde Bellikon
Perfluorooctanesulfonic acid (PFOS) 0.001 µg/l 0.3 µg/l
0.3 %
Mean · Gemeinde Bellikon
Perfluorooctanoic acid (PFOA) < 0.001 µg/l
below limit of quantification
0.5 µg/l
< 0.2 % *
Mean · Gemeinde Bellikon

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Metabolites (2)

Metabolites – Gemeinde Bellikon
Parameter Value Parametric value Share of the parametric value Reference
Chlorothalonil metabolite R417888 0.13 µg/l 0.1 µg/l
130 % Mean above the parametric value
Mean · Gemeinde Bellikon
Chlorothalonil metabolite R471811 0.31 µg/l 0.1 µg/l
310 % Mean above the parametric value
Mean · Gemeinde Bellikon

Annual means and medians are not individual measured values, but the parametric values apply per sample. If a mean lies above it, at least one individual sample was above it — the mean does not say how many, or by how much. That is why this is not reported here as an exceedance of the parametric value. What counts remains the water supplier's publication, which each row links to.

Indicator parameters (1)

Indicator parameters – Gemeinde Bellikon
Parameter Value Parametric value Share of the parametric value Reference
Temperature 9.9 °C Mean · Gemeinde Bellikon

Further parameters (3)

Further parameters – Gemeinde Bellikon
Parameter Value Parametric value Share of the parametric value Reference
Calcium 102 mg/l Mean · Gemeinde Bellikon
Magnesium 17.5 mg/l Mean · Gemeinde Bellikon
Total hardness 32 °fH Mean · Gemeinde Bellikon

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Source: https://trinkwasser.ch/de/versorger/661/wv-bellikon/3592/gemeinde-bellikon · 2026 · 2026 · retrieved on 07/08/2026

Postcodes in this zone: 5454

Frequently asked questions about drinking water in Bellikon

How hard is the water in Bellikon?
WV Bellikon publishes a total hardness of 32 °fH for the supply zone Gemeinde Bellikon — that corresponds to 17.9 °dH. The hardness range is a classification under the German Detergents and Cleaning Products Act (soft below 8,4 °dH, medium 8,4 to 14 °dH, hard above that) and not a quality verdict — it indicates how much calcium and magnesium is dissolved in the water. Basis: 2026, retrieved on 07/08/2026.
How much nitrate is in the drinking water in Bellikon?
WV Bellikon publishes a nitrate value of 23.2 mg/l for the supply zone Gemeinde Bellikon. The statutory parametric value is 40 mg/l; the measured value represents 58 % of the parametric value. Basis: 2026, retrieved on 07/08/2026.
Who supplies the drinking water in Bellikon?
WV Bellikon. The values shown here come from the supply zone Gemeinde Bellikon and apply to the water the supplier delivers. What happens between the building connection and the tap — in old lead pipes, for example — is not covered by these analyses; information on that is provided by owners, the health authority or an examination by an accredited laboratory.

General questions — how current the data is, limit of quantification, parametric values, who is behind this site — are answered under Questions & answers.