Skip to content
maunawai.info

Drinking water in Bellach

2 supply zones — values can differ depending on the district. Below is the zone with the most documented parameters, the others collapsed underneath. To determine the exact match, look up the postcode.

How to read the share of the parametric value

12 % Share of the parametric value. The proportion of the permitted maximum that the measured value uses — here 12 %, so just over an eighth.
< 10 % * Below the limit of quantification. The substance was not detectable. The mark shows where the detection limit lies relative to the parametric value — the actual share of the parametric value is below that.

Several samples per year: for chemical parameters the mean value is given, for microbiological ones the highest measured value. There the parametric value is zero — a single finding would disappear in the average, and it is precisely that finding which is the information. Which reference applies is stated in the last column of the table.

Bellach obere Zone

Gemeinde Bellach

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

Water hardness
11.3 °dH
Hardness range medium
Key values Bellach obere Zone
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 4.5 mg/l 40 mg/l
11 %
Mean · Bellach obere Zone
Escherichia coli (E. coli) nn
not detectable
Unit not stated in the document
0/100 ml Maximum · Median nn · Bellach obere Zone
Sulphate 3.5 mg/l Mean · Bellach obere Zone
Show all recorded parameters (10 — most recent value per parameter)

Microbiology (3)

Microbiology – Bellach obere Zone
Parameter Value Parametric value Share of the parametric value Reference
Aerobic mesophilic bacteria 3.5 KBE/ml 300 1/ml Mean · Bellach obere Zone
Escherichia coli (E. coli) nn
not detectable
Unit not stated in the document
0/100 ml Maximum · Median nn · Bellach obere Zone
Intestinal enterococci nn
not detectable
Unit not stated in the document
0/100 ml Maximum · Median nn · Bellach obere Zone

Chemical parameters (1)

Chemical parameters – Bellach obere Zone
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 4.5 mg/l 40 mg/l
11 %
Mean · Bellach obere Zone

Indicator parameters (2)

Indicator parameters – Bellach obere Zone
Parameter Value Parametric value Share of the parametric value Reference
pH 7.19 Mean · Bellach obere Zone
Sulphate 3.5 mg/l Mean · Bellach obere Zone

Further parameters (4)

Further parameters – Bellach obere Zone
Parameter Value Parametric value Share of the parametric value Reference
Calcium 77 mg/l Mean · Bellach obere Zone
Hydrogen carbonate 19.4 mg/l Mean · Bellach obere Zone
Magnesium 2.1 mg/l Mean · Bellach obere Zone
Total hardness 20.1 °fH Mean · Bellach obere Zone

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Postcodes in this zone: 4512

Show 1 more supply zone

Bellach untere Zone

Gemeinde Bellach

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

Water hardness
17.9 °dH
Hardness range hard
Key values Bellach untere Zone
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 17.5 mg/l 40 mg/l
44 %
Mean · Bellach untere Zone
Escherichia coli (E. coli) nn
not detectable
Unit not stated in the document
0/100 ml Maximum · Median nn · Bellach untere Zone
Show all recorded parameters (12 — most recent value per parameter)

Microbiology (3)

Microbiology – Bellach untere Zone
Parameter Value Parametric value Share of the parametric value Reference
Aerobic mesophilic bacteria 2.91 KBE/ml 300 1/ml Mean · Bellach untere Zone
Escherichia coli (E. coli) nn
not detectable
Unit not stated in the document
0/100 ml Maximum · Median nn · Bellach untere Zone
Intestinal enterococci nn
not detectable
Unit not stated in the document
0/100 ml Maximum · Median nn · Bellach untere Zone

Chemical parameters (1)

Chemical parameters – Bellach untere Zone
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 17.5 mg/l 40 mg/l
44 %
Mean · Bellach untere Zone

Metabolites (2)

Metabolites – Bellach untere Zone
Parameter Value Parametric value Share of the parametric value Reference
Chlorothalonil metabolite R417888 < 0.02 µg/l
below limit of quantification
0.1 µg/l
< 20 % *
Mean · Bellach untere Zone
Chlorothalonil metabolite R471811 0.11 µg/l 0.1 µg/l
110 % Mean above the parametric value
Mean · Bellach untere Zone

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Annual means and medians are not individual measured values, but the parametric values apply per sample. If a mean lies above it, at least one individual sample was above it — the mean does not say how many, or by how much. That is why this is not reported here as an exceedance of the parametric value. What counts remains the water supplier's publication, which each row links to.

Indicator parameters (3)

Indicator parameters – Bellach untere Zone
Parameter Value Parametric value Share of the parametric value Reference
Conductivity (25 °C) 640 µS/cm Mean · Bellach untere Zone
pH 6.91 Mean · Bellach untere Zone
Turbidity 0.06 TE/F Mean · Bellach untere Zone

Further parameters (3)

Further parameters – Bellach untere Zone
Parameter Value Parametric value Share of the parametric value Reference
Calcium 118 mg/l Mean · Bellach untere Zone
Magnesium 7.55 mg/l Mean · Bellach untere Zone
Total hardness 32 °fH Mean · Bellach untere Zone

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Postcodes in this zone: 4512

Frequently asked questions about drinking water in Bellach

How hard is the water in Bellach?
Gemeinde Bellach publishes a total hardness of 20.1 °fH for the supply zone Bellach obere Zone — that corresponds to 11.3 °dH. The hardness range is a classification under the German Detergents and Cleaning Products Act (soft below 8,4 °dH, medium 8,4 to 14 °dH, hard above that) and not a quality verdict — it indicates how much calcium and magnesium is dissolved in the water. Basis: 2026, retrieved on 07/08/2026.
How much nitrate is in the drinking water in Bellach?
Gemeinde Bellach publishes a nitrate value of 4.5 mg/l for the supply zone Bellach obere Zone. The statutory parametric value is 40 mg/l; the measured value represents 11 % of the parametric value. Basis: 2026, retrieved on 07/08/2026.
Who supplies the drinking water in Bellach?
Gemeinde Bellach. The values shown here come from the supply zone Bellach obere Zone and apply to the water the supplier delivers. What happens between the building connection and the tap — in old lead pipes, for example — is not covered by these analyses; information on that is provided by owners, the health authority or an examination by an accredited laboratory.

General questions — how current the data is, limit of quantification, parametric values, who is behind this site — are answered under Questions & answers.