Skip to content
maunawai.info

Drinking water in Bad Waldsee

One supply zone, water supplier: Wasserversorgungsverband Obere Schussentalgruppe.

How to read the share of the parametric value

12 % Share of the parametric value. The proportion of the permitted maximum that the measured value uses — here 12 %, so just over an eighth.
< 10 % * Below the limit of quantification. The substance was not detectable. The mark shows where the detection limit lies relative to the parametric value — the actual share of the parametric value is below that.

Several samples per year: for chemical parameters the mean value is given, for microbiological ones the highest measured value. There the parametric value is zero — a single finding would disappear in the average, and it is precisely that finding which is the information. Which reference applies is stated in the last column of the table.

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

No date is given for these values. The water supplier publishes the analysis without a sampling date and without a report date. When the water was examined is not apparent from the source — we do not add a date and we do not estimate one. What is stated is therefore only when we retrieved the document.

Key values Bad Waldsee
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 15 mg/l 50 mg/l
30 %
Single value · Bad Waldsee
Sulphate 26 mg/l 250 mg/l
10 %
Single value · Bad Waldsee
Sodium 11,7 mg/l 200 mg/l
6 %
Single value · Bad Waldsee
Show all recorded parameters (13 — most recent value per parameter)

Chemical parameters (3)

Chemical parameters – Bad Waldsee
Parameter Value Parametric value Share of the parametric value Reference
Fluoride <0,15 mg/l
below limit of quantification
1.5 mg/l
< 10 % *
Single value · Bad Waldsee
Nitrate 15 mg/l 50 mg/l
30 %
Single value · Bad Waldsee
Uranium 0,0045 mg/l 10 µg/l
45 %
Single value · Bad Waldsee

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Indicator parameters (4)

Indicator parameters – Bad Waldsee
Parameter Value Parametric value Share of the parametric value Reference
Chloride 21 mg/l 250 mg/l
8 %
Single value · Bad Waldsee
pH 7,14 6,5–9,5 Single value · Bad Waldsee
Sodium 11,7 mg/l 200 mg/l
6 %
Single value · Bad Waldsee
Sulphate 26 mg/l 250 mg/l
10 %
Single value · Bad Waldsee

Further parameters (6)

Further parameters – Bad Waldsee
Parameter Value Parametric value Share of the parametric value Reference
Acid capacity to pH 4.3 6,9 mmol/l Single value · Bad Waldsee
Base capacity to pH 8.2 0,485 mmol/l Single value · Bad Waldsee
Calcium 107 mg/l Single value · Bad Waldsee
Hydrogen carbonate 423 mg/l Single value · Bad Waldsee
Magnesium 21,3 mg/l Single value · Bad Waldsee
Potassium 1,8 mg/l Single value · Bad Waldsee

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Source: https://www.wvv-osg.de/analyse/badwaldsee.html · retrieved on 11/07/2026

Postcodes in this zone: 88339

Frequently asked questions about drinking water in Bad Waldsee

How much nitrate is in the drinking water in Bad Waldsee?
Wasserversorgungsverband Obere Schussentalgruppe publishes a nitrate value of 15 mg/l for the supply zone Bad Waldsee. The statutory parametric value is 50 mg/l; the measured value represents 30 % of the parametric value. Basis: Publication by the water supplier, retrieved on 11/07/2026.
Who supplies the drinking water in Bad Waldsee?
Wasserversorgungsverband Obere Schussentalgruppe. The values shown here come from the supply zone Bad Waldsee and apply to the water the supplier delivers. What happens between the building connection and the tap — in old lead pipes, for example — is not covered by these analyses; information on that is provided by owners, the health authority or an examination by an accredited laboratory.

General questions — how current the data is, limit of quantification, parametric values, who is behind this site — are answered under Questions & answers.