Skip to content
maunawai.info

Drinking water in Bad Urach

2 supply zones — values can differ depending on the district. Below is the zone with the most documented parameters, the others collapsed underneath. To determine the exact match, look up the postcode.

How to read the share of the parametric value

12 % Share of the parametric value. The proportion of the permitted maximum that the measured value uses — here 12 %, so just over an eighth.
< 10 % * Below the limit of quantification. The substance was not detectable. The mark shows where the detection limit lies relative to the parametric value — the actual share of the parametric value is below that.

Several samples per year: for chemical parameters the mean value is given, for microbiological ones the highest measured value. There the parametric value is zero — a single finding would disappear in the average, and it is precisely that finding which is the information. Which reference applies is stated in the last column of the table.

Hengen / HB / Reinwasser (E.-Nr.: 4150780006)

Zweckverband Vordere Albgruppe

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

These values are more than a year old. The most recent analysis the water supplier has published for this zone dates from 17/03/2022. We have no newer values — which is why we show the latest available ones rather than none at all. They say nothing about how the water has changed since then.

Water hardness
16 °dH
Hardness range hard
Key values Hengen / HB / Reinwasser (E.-Nr.: 4150780006)
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 13 mg/l 50 mg/l
26 %
Single value
Show all recorded parameters (6 — most recent value per parameter)

Chemical parameters (1)

Chemical parameters – Hengen / HB / Reinwasser (E.-Nr.: 4150780006)
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 13 mg/l 50 mg/l
26 %
Single value

Indicator parameters (2)

Indicator parameters – Hengen / HB / Reinwasser (E.-Nr.: 4150780006)
Parameter Value Parametric value Share of the parametric value Reference
Iron nicht nachgewiesen
not detectable
Unit not stated in the document
0.2 mg/l Single value
Manganese nicht nachgewiesen
not detectable
Unit not stated in the document
50 µg/l Single value

Further parameters (3)

Further parameters – Hengen / HB / Reinwasser (E.-Nr.: 4150780006)
Parameter Value Parametric value Share of the parametric value Reference
Carbonate hardness 2,74 mmol/l Single value
Saturation index + 0,23 Single value
Total hardness 16,0 °dH Single value

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Source: https://www.stadtwerke-bad-urach.de/ceasy/resource/?id=1208&download=1 · 25.03.2022 · 17.03.2022 · retrieved on 14/07/2026

Postcodes in this zone: 72574

Show 1 more supply zone

Bad Urach / SW BU / Seilerweg 30

Stadtwerke Bad Urach

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

These values are more than a year old. The most recent analysis the water supplier has published for this zone dates from 23/01/2025. We have no newer values — which is why we show the latest available ones rather than none at all. They say nothing about how the water has changed since then.

Water hardness
16.6 °dH
Hardness range hard

No core values are available for this zone yet.

Show all recorded parameters (3 — most recent value per parameter)

Further parameters (3)

Further parameters – Bad Urach / SW BU / Seilerweg 30
Parameter Value Parametric value Share of the parametric value Reference
Carbonate hardness 2,83 mmol Single value
Saturation index 0,23 Single value
Total hardness 16,60 °dH Single value

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Source: https://www.stadtwerke-bad-urach.de/ceasy/resource/?id=1350&download=1 · 23.01.2025 · retrieved on 11/07/2026

Postcodes in this zone: 72574

Frequently asked questions about drinking water in Bad Urach

How hard is the water in Bad Urach?
Zweckverband Vordere Albgruppe publishes a total hardness of 16 °dH for the supply zone Hengen / HB / Reinwasser (E.-Nr.: 4150780006) (hardness range hard). The hardness range is a classification under the German Detergents and Cleaning Products Act (soft below 8,4 °dH, medium 8,4 to 14 °dH, hard above that) and not a quality verdict — it indicates how much calcium and magnesium is dissolved in the water. Basis: 25.03.2022, retrieved on 14/07/2026.
How much nitrate is in the drinking water in Bad Urach?
Zweckverband Vordere Albgruppe publishes a nitrate value of 13 mg/l for the supply zone Hengen / HB / Reinwasser (E.-Nr.: 4150780006). The statutory parametric value is 50 mg/l; the measured value represents 26 % of the parametric value. Basis: 25.03.2022, retrieved on 14/07/2026.
Who supplies the drinking water in Bad Urach?
Zweckverband Vordere Albgruppe. The values shown here come from the supply zone Hengen / HB / Reinwasser (E.-Nr.: 4150780006) and apply to the water the supplier delivers. What happens between the building connection and the tap — in old lead pipes, for example — is not covered by these analyses; information on that is provided by owners, the health authority or an examination by an accredited laboratory.

General questions — how current the data is, limit of quantification, parametric values, who is behind this site — are answered under Questions & answers.