Skip to content
maunawai.info

Drinking water in Bad Liebenwerda

5 supply zones — values can differ depending on the district. Below is the zone with the most documented parameters, the others collapsed underneath. To determine the exact match, look up the postcode.

How to read the share of the parametric value

12 % Share of the parametric value. The proportion of the permitted maximum that the measured value uses — here 12 %, so just over an eighth.
< 10 % * Below the limit of quantification. The substance was not detectable. The mark shows where the detection limit lies relative to the parametric value — the actual share of the parametric value is below that.

Several samples per year: for chemical parameters the mean value is given, for microbiological ones the highest measured value. There the parametric value is zero — a single finding would disappear in the average, and it is precisely that finding which is the information. Which reference applies is stated in the last column of the table.

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

No date is given for these values. The water supplier publishes the analysis without a sampling date and without a report date. When the water was examined is not apparent from the source — we do not add a date and we do not estimate one. What is stated is therefore only when we retrieved the document.

Water hardness
Hardness range 8,26
Key values Fichtenberg
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 23,3 mg/l 50 mg/l
47 %
Single value · Fichtenberg
Lead < 0,01 mg/l
below limit of quantification
10 µg/l
< 100 % *
Single value · Fichtenberg
Escherichia coli (E. coli) 0 KBE/100 ml 0/100 ml Single value · Fichtenberg
Sodium 23,3 mg/l 200 mg/l
12 %
Single value · Fichtenberg

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Show all recorded parameters (17 — most recent value per parameter)

Microbiology (2)

Microbiology – Fichtenberg
Parameter Value Parametric value Share of the parametric value Reference
Escherichia coli (E. coli) 0 KBE/100 ml 0/100 ml Single value · Fichtenberg
Intestinal enterococci 0 KBE/100 ml 0/100 ml Single value · Fichtenberg

Chemical parameters (8)

Chemical parameters – Fichtenberg
Parameter Value Parametric value Share of the parametric value Reference
Arsenic < 0,01 mg/l
below limit of quantification
10 µg/l
< 100 % *
Single value · Fichtenberg
Chromium < 0,0009 mg/l
below limit of quantification
25 µg/l
< 4 % *
Single value · Fichtenberg
Copper < 0,005 mg/l
below limit of quantification
2 mg/l
< 0.3 % *
Single value · Fichtenberg
Lead < 0,01 mg/l
below limit of quantification
10 µg/l
< 100 % *
Single value · Fichtenberg
Mercury < 0,1 µg/l
below limit of quantification
1 µg/l
< 10 % *
Single value · Fichtenberg
Nickel < 0,01 mg/l
below limit of quantification
20 µg/l
< 50 % *
Single value · Fichtenberg
Nitrate 23,3 mg/l 50 mg/l
47 %
Single value · Fichtenberg
Nitrite 0,24 mg/l 0.5 mg/l
48 %
Single value · Fichtenberg

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Indicator parameters (6)

Indicator parameters – Fichtenberg
Parameter Value Parametric value Share of the parametric value Reference
Ammonium 0,005 mg/l 0.5 mg/l
1 %
Single value · Fichtenberg
Coliform bacteria 0 KBE/100 ml 0/100 ml Single value · Fichtenberg
Iron 0,066 mg/l 0.2 mg/l
33 %
Single value · Fichtenberg
Manganese < 0,005 mg/l
below limit of quantification
50 µg/l
< 10 % *
Single value · Fichtenberg
pH 8,51 6,5–9,5 Single value · Fichtenberg
Sodium 23,3 mg/l 200 mg/l
12 %
Single value · Fichtenberg

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Further parameters (1)

Further parameters – Fichtenberg
Parameter Value Parametric value Share of the parametric value Reference
Hardness range (WRMG) mittel Single value · Fichtenberg

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Postcodes in this zone: 04924

Show 4 more supply zones

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

No date is given for these values. The water supplier publishes the analysis without a sampling date and without a report date. When the water was examined is not apparent from the source — we do not add a date and we do not estimate one. What is stated is therefore only when we retrieved the document.

Water hardness
Hardness range 11,30
Key values Frauenhain
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 33,5 mg/l 50 mg/l
67 %
Single value · Frauenhain
Lead < 0,01 mg/l
below limit of quantification
10 µg/l
< 100 % *
Single value · Frauenhain
Escherichia coli (E. coli) 0 KBE/100 ml 0/100 ml Single value · Frauenhain
Sodium 16,5 mg/l 200 mg/l
8 %
Single value · Frauenhain

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Show all recorded parameters (17 — most recent value per parameter)

Microbiology (2)

Microbiology – Frauenhain
Parameter Value Parametric value Share of the parametric value Reference
Escherichia coli (E. coli) 0 KBE/100 ml 0/100 ml Single value · Frauenhain
Intestinal enterococci 0 KBE/100 ml 0/100 ml Single value · Frauenhain

Chemical parameters (8)

Chemical parameters – Frauenhain
Parameter Value Parametric value Share of the parametric value Reference
Arsenic < 0,01 mg/l
below limit of quantification
10 µg/l
< 100 % *
Single value · Frauenhain
Chromium < 0,0009 mg/l
below limit of quantification
25 µg/l
< 4 % *
Single value · Frauenhain
Copper < 0,005 mg/l
below limit of quantification
2 mg/l
< 0.3 % *
Single value · Frauenhain
Lead < 0,01 mg/l
below limit of quantification
10 µg/l
< 100 % *
Single value · Frauenhain
Mercury < 0,1 µg/l
below limit of quantification
1 µg/l
< 10 % *
Single value · Frauenhain
Nickel < 0,01 mg/l
below limit of quantification
20 µg/l
< 50 % *
Single value · Frauenhain
Nitrate 33,5 mg/l 50 mg/l
67 %
Single value · Frauenhain
Nitrite < 0,01 mg/l
below limit of quantification
0.5 mg/l
< 2 % *
Single value · Frauenhain

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Indicator parameters (6)

Indicator parameters – Frauenhain
Parameter Value Parametric value Share of the parametric value Reference
Ammonium < 0,005 mg/l
below limit of quantification
0.5 mg/l
< 1 % *
Single value · Frauenhain
Coliform bacteria 0 KBE/100 ml 0/100 ml Single value · Frauenhain
Iron 0,032 mg/l 0.2 mg/l
16 %
Single value · Frauenhain
Manganese < 0,005 mg/l
below limit of quantification
50 µg/l
< 10 % *
Single value · Frauenhain
pH 7,96 6,5–9,5 Single value · Frauenhain
Sodium 16,5 mg/l 200 mg/l
8 %
Single value · Frauenhain

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Further parameters (1)

Further parameters – Frauenhain
Parameter Value Parametric value Share of the parametric value Reference
Hardness range (WRMG) mittel Single value · Frauenhain

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Postcodes in this zone: 04924

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

No date is given for these values. The water supplier publishes the analysis without a sampling date and without a report date. When the water was examined is not apparent from the source — we do not add a date and we do not estimate one. What is stated is therefore only when we retrieved the document.

Water hardness
Hardness range 5,95
Key values Merzdorf
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 36,0 mg/l 50 mg/l
72 %
Single value · Merzdorf
Lead < 0,01 mg/l
below limit of quantification
10 µg/l
< 100 % *
Single value · Merzdorf
Escherichia coli (E. coli) 0 KBE/100 ml 0/100 ml Single value · Merzdorf
Sodium 19,9 mg/l 200 mg/l
10 %
Single value · Merzdorf

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Show all recorded parameters (17 — most recent value per parameter)

Microbiology (2)

Microbiology – Merzdorf
Parameter Value Parametric value Share of the parametric value Reference
Escherichia coli (E. coli) 0 KBE/100 ml 0/100 ml Single value · Merzdorf
Intestinal enterococci 0 KBE/100 ml 0/100 ml Single value · Merzdorf

Chemical parameters (8)

Chemical parameters – Merzdorf
Parameter Value Parametric value Share of the parametric value Reference
Arsenic < 0,01 mg/l
below limit of quantification
10 µg/l
< 100 % *
Single value · Merzdorf
Chromium < 0,0009 mg/l
below limit of quantification
25 µg/l
< 4 % *
Single value · Merzdorf
Copper < 0,005 mg/l
below limit of quantification
2 mg/l
< 0.3 % *
Single value · Merzdorf
Lead < 0,01 mg/l
below limit of quantification
10 µg/l
< 100 % *
Single value · Merzdorf
Mercury < 0,1 µg/l
below limit of quantification
1 µg/l
< 10 % *
Single value · Merzdorf
Nickel < 0,01 mg/l
below limit of quantification
20 µg/l
< 50 % *
Single value · Merzdorf
Nitrate 36,0 mg/l 50 mg/l
72 %
Single value · Merzdorf
Nitrite 0,01 mg/l 0.5 mg/l
2 %
Single value · Merzdorf

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Indicator parameters (6)

Indicator parameters – Merzdorf
Parameter Value Parametric value Share of the parametric value Reference
Ammonium 0,005 mg/l 0.5 mg/l
1 %
Single value · Merzdorf
Coliform bacteria 0 KBE/100 ml 0/100 ml Single value · Merzdorf
Iron 0,01 mg/l 0.2 mg/l
5 %
Single value · Merzdorf
Manganese < 0,005 mg/l
below limit of quantification
50 µg/l
< 10 % *
Single value · Merzdorf
pH 8,68 6,5–9,5 Single value · Merzdorf
Sodium 19,9 mg/l 200 mg/l
10 %
Single value · Merzdorf

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Further parameters (1)

Further parameters – Merzdorf
Parameter Value Parametric value Share of the parametric value Reference
Hardness range (WRMG) weich Single value · Merzdorf

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Postcodes in this zone: 04924

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

No date is given for these values. The water supplier publishes the analysis without a sampling date and without a report date. When the water was examined is not apparent from the source — we do not add a date and we do not estimate one. What is stated is therefore only when we retrieved the document.

Water hardness
Hardness range 9,53
Key values Oschätzchen
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 3,66 mg/l 50 mg/l
7 %
Single value · Oschätzchen
Lead < 0,01 mg/l
below limit of quantification
10 µg/l
< 100 % *
Single value · Oschätzchen
Escherichia coli (E. coli) 0 KBE/100 ml 0/100 ml Single value · Oschätzchen
Sodium 38,4 mg/l 200 mg/l
19 %
Single value · Oschätzchen

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Show all recorded parameters (17 — most recent value per parameter)

Microbiology (2)

Microbiology – Oschätzchen
Parameter Value Parametric value Share of the parametric value Reference
Escherichia coli (E. coli) 0 KBE/100 ml 0/100 ml Single value · Oschätzchen
Intestinal enterococci 0 KBE/100 ml 0/100 ml Single value · Oschätzchen

Chemical parameters (8)

Chemical parameters – Oschätzchen
Parameter Value Parametric value Share of the parametric value Reference
Arsenic < 0,01 mg/l
below limit of quantification
10 µg/l
< 100 % *
Single value · Oschätzchen
Chromium < 0,0005 mg/l
below limit of quantification
25 µg/l
< 2 % *
Single value · Oschätzchen
Copper < 0,005 mg/l
below limit of quantification
2 mg/l
< 0.3 % *
Single value · Oschätzchen
Lead < 0,01 mg/l
below limit of quantification
10 µg/l
< 100 % *
Single value · Oschätzchen
Mercury < 0,1 µg/l
below limit of quantification
1 µg/l
< 10 % *
Single value · Oschätzchen
Nickel < 0,01 mg/l
below limit of quantification
20 µg/l
< 50 % *
Single value · Oschätzchen
Nitrate 3,66 mg/l 50 mg/l
7 %
Single value · Oschätzchen
Nitrite < 0,01 mg/l
below limit of quantification
0.5 mg/l
< 2 % *
Single value · Oschätzchen

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Indicator parameters (6)

Indicator parameters – Oschätzchen
Parameter Value Parametric value Share of the parametric value Reference
Ammonium 0,03 mg/l 0.5 mg/l
6 %
Single value · Oschätzchen
Coliform bacteria 0 KBE/100 ml 0/100 ml Single value · Oschätzchen
Iron 0,033 mg/l 0.2 mg/l
17 %
Single value · Oschätzchen
Manganese < 0,005 mg/l
below limit of quantification
50 µg/l
< 10 % *
Single value · Oschätzchen
pH 8,20 6,5–9,5 Single value · Oschätzchen
Sodium 38,4 mg/l 200 mg/l
19 %
Single value · Oschätzchen

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Further parameters (1)

Further parameters – Oschätzchen
Parameter Value Parametric value Share of the parametric value Reference
Hardness range (WRMG) mittel Single value · Oschätzchen

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Postcodes in this zone: 04924

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

No date is given for these values. The water supplier publishes the analysis without a sampling date and without a report date. When the water was examined is not apparent from the source — we do not add a date and we do not estimate one. What is stated is therefore only when we retrieved the document.

Water hardness
Hardness range 5,51
Key values Theisa
Parameter Value Parametric value Share of the parametric value Reference
Nitrate < 1,0 mg/l
below limit of quantification
50 mg/l
< 2 % *
Single value · Theisa
Lead < 0,01 mg/l
below limit of quantification
10 µg/l
< 100 % *
Single value · Theisa
Escherichia coli (E. coli) 0 KBE/100 ml 0/100 ml Single value · Theisa
Sodium 9,4 mg/l 200 mg/l
5 %
Single value · Theisa

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Show all recorded parameters (17 — most recent value per parameter)

Microbiology (2)

Microbiology – Theisa
Parameter Value Parametric value Share of the parametric value Reference
Escherichia coli (E. coli) 0 KBE/100 ml 0/100 ml Single value · Theisa
Intestinal enterococci 0 KBE/100 ml 0/100 ml Single value · Theisa

Chemical parameters (8)

Chemical parameters – Theisa
Parameter Value Parametric value Share of the parametric value Reference
Arsenic < 0,01 mg/l
below limit of quantification
10 µg/l
< 100 % *
Single value · Theisa
Chromium < 0,0008 mg/l
below limit of quantification
25 µg/l
< 3 % *
Single value · Theisa
Copper < 0,005 mg/l
below limit of quantification
2 mg/l
< 0.3 % *
Single value · Theisa
Lead < 0,01 mg/l
below limit of quantification
10 µg/l
< 100 % *
Single value · Theisa
Mercury < 0,1 µg/l
below limit of quantification
1 µg/l
< 10 % *
Single value · Theisa
Nickel < 0,010 mg/l
below limit of quantification
20 µg/l
< 50 % *
Single value · Theisa
Nitrate < 1,0 mg/l
below limit of quantification
50 mg/l
< 2 % *
Single value · Theisa
Nitrite < 0,01 mg/l
below limit of quantification
0.5 mg/l
< 2 % *
Single value · Theisa

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Indicator parameters (6)

Indicator parameters – Theisa
Parameter Value Parametric value Share of the parametric value Reference
Ammonium 0,006 mg/l 0.5 mg/l
1 %
Single value · Theisa
Coliform bacteria 0 KBE/100 ml 0/100 ml Single value · Theisa
Iron 0,018 mg/l 0.2 mg/l
9 %
Single value · Theisa
Manganese < 0,005 mg/l
below limit of quantification
50 µg/l
< 10 % *
Single value · Theisa
pH 8,26 6,5–9,5 Single value · Theisa
Sodium 9,4 mg/l 200 mg/l
5 %
Single value · Theisa

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Further parameters (1)

Further parameters – Theisa
Parameter Value Parametric value Share of the parametric value Reference
Hardness range (WRMG) weich Single value · Theisa

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Postcodes in this zone: 04924

Frequently asked questions about drinking water in Bad Liebenwerda

How hard is the water in Bad Liebenwerda?
Wasser- und Abwasserverband Elsterwerda (WAV Elsterwerda) publishes the hardness range 8,26 for the supply zone Fichtenberg. The hardness range is a classification under the German Detergents and Cleaning Products Act (soft below 8,4 °dH, medium 8,4 to 14 °dH, hard above that) and not a quality verdict — it indicates how much calcium and magnesium is dissolved in the water. Basis: Publication by the water supplier, retrieved on 11/07/2026.
How much nitrate is in the drinking water in Bad Liebenwerda?
Wasser- und Abwasserverband Elsterwerda (WAV Elsterwerda) publishes a nitrate value of 23,3 mg/l for the supply zone Fichtenberg. The statutory parametric value is 50 mg/l; the measured value represents 47 % of the parametric value. Basis: Publication by the water supplier, retrieved on 11/07/2026.
Who supplies the drinking water in Bad Liebenwerda?
Wasser- und Abwasserverband Elsterwerda (WAV Elsterwerda). The values shown here come from the supply zone Fichtenberg and apply to the water the supplier delivers. What happens between the building connection and the tap — in old lead pipes, for example — is not covered by these analyses; information on that is provided by owners, the health authority or an examination by an accredited laboratory.

General questions — how current the data is, limit of quantification, parametric values, who is behind this site — are answered under Questions & answers.