Skip to content
maunawai.info

Drinking water in Aran, Chenaux, Grandvaux

5 supply zones — values can differ depending on the district. Below is the zone with the most documented parameters, the others collapsed underneath. To determine the exact match, look up the postcode.

How to read the share of the parametric value

12 % Share of the parametric value. The proportion of the permitted maximum that the measured value uses — here 12 %, so just over an eighth.
< 10 % * Below the limit of quantification. The substance was not detectable. The mark shows where the detection limit lies relative to the parametric value — the actual share of the parametric value is below that.

Several samples per year: for chemical parameters the mean value is given, for microbiological ones the highest measured value. There the parametric value is zero — a single finding would disappear in the average, and it is precisely that finding which is the information. Which reference applies is stated in the last column of the table.

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

These values are more than a year old. The most recent analysis the water supplier has published for this zone dates from 31/12/2024. We have no newer values — which is why we show the latest available ones rather than none at all. They say nothing about how the water has changed since then.

Water hardness
9 °dH
Hardness range medium
Key values Cully
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 1.9 mg/l 40 mg/l
5 %
Mean · Cully
Escherichia coli (E. coli) 0 KBE/100ml 0/100 ml Maximum · Median 0 · Cully
Sulphate 11 mg/l Mean · Cully
Sodium 1.65 mg/l 200 mg/l
0.8 %
Mean · Cully
Show all recorded parameters (20 — most recent value per parameter)

Microbiology (3)

Microbiology – Cully
Parameter Value Parametric value Share of the parametric value Reference
Aerobic mesophilic bacteria 0 KBE/ml 300 1/ml Mean · Cully
Escherichia coli (E. coli) 0 KBE/100ml 0/100 ml Maximum · Median 0 · Cully
Intestinal enterococci 0 KBE/100ml 0/100 ml Maximum · Median 0 · Cully

Chemical parameters (2)

Chemical parameters – Cully
Parameter Value Parametric value Share of the parametric value Reference
Fluoride < 0.1 mg/l
below limit of quantification
1.5 mg/l
< 7 % *
Mean · Cully
Nitrate 1.9 mg/l 40 mg/l
5 %
Mean · Cully

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Metabolites (2)

Metabolites – Cully
Parameter Value Parametric value Share of the parametric value Reference
Chlorothalonil metabolite R417888 < 0.01 µg/l
below limit of quantification
0.1 µg/l
< 10 % *
Mean · Cully
Chlorothalonil metabolite R471811 < 0.01 µg/l
below limit of quantification
0.1 µg/l
< 10 % *
Mean · Cully

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Indicator parameters (7)

Indicator parameters – Cully
Parameter Value Parametric value Share of the parametric value Reference
Chloride 1.4 mg/l Mean · Cully
Conductivity (25 °C) 295 µS/cm Mean · Cully
pH 7.5 Mean · Cully
Sodium 1.65 mg/l 200 mg/l
0.8 %
Mean · Cully
Sulphate 11 mg/l Mean · Cully
Temperature 15 °C Mean · Cully
Turbidity 0.1 TE/F Mean · Cully

Further parameters (6)

Further parameters – Cully
Parameter Value Parametric value Share of the parametric value Reference
Calcium 57 mg/l Mean · Cully
Dissolved organic carbon (DOC) 0.5 mg/l Mean · Cully
Hydrogen carbonate 185 mg/l Mean · Cully
Magnesium 4.3 mg/l Mean · Cully
Potassium 0.6 mg/l Mean · Cully
Total hardness 16.1 °fH Mean · Cully

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Source: https://trinkwasser.ch/de/versorger/958/commune-de-bourg-en-lavaux/2556/cully · 2024 · 2024 · retrieved on 07/08/2026

Postcodes in this zone: 1091

Show 4 more supply zones

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

These values are more than a year old. The most recent analysis the water supplier has published for this zone dates from 31/12/2024. We have no newer values — which is why we show the latest available ones rather than none at all. They say nothing about how the water has changed since then.

Water hardness
10.6 °dH
Hardness range medium
Key values Epesses
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 2.2 mg/l 40 mg/l
6 %
Mean · Epesses
Escherichia coli (E. coli) 0 KBE/100ml 0/100 ml Maximum · Median 0 · Epesses
Sulphate 12 mg/l Mean · Epesses
Sodium 8.8 mg/l 200 mg/l
4 %
Mean · Epesses
Show all recorded parameters (18 — most recent value per parameter)

Microbiology (3)

Microbiology – Epesses
Parameter Value Parametric value Share of the parametric value Reference
Aerobic mesophilic bacteria 0 KBE/ml 300 1/ml Mean · Epesses
Escherichia coli (E. coli) 0 KBE/100ml 0/100 ml Maximum · Median 0 · Epesses
Intestinal enterococci 0 KBE/100ml 0/100 ml Maximum · Median 0 · Epesses

Chemical parameters (2)

Chemical parameters – Epesses
Parameter Value Parametric value Share of the parametric value Reference
Fluoride < 0.1 mg/l
below limit of quantification
1.5 mg/l
< 7 % *
Mean · Epesses
Nitrate 2.2 mg/l 40 mg/l
6 %
Mean · Epesses

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Indicator parameters (7)

Indicator parameters – Epesses
Parameter Value Parametric value Share of the parametric value Reference
Chloride 7.9 mg/l Mean · Epesses
Conductivity (25 °C) 385 µS/cm Mean · Epesses
pH 7.55 Mean · Epesses
Sodium 8.8 mg/l 200 mg/l
4 %
Mean · Epesses
Sulphate 12 mg/l Mean · Epesses
Temperature 15 °C Mean · Epesses
Turbidity 0.1 TE/F Mean · Epesses

Further parameters (6)

Further parameters – Epesses
Parameter Value Parametric value Share of the parametric value Reference
Calcium 60 mg/l Mean · Epesses
Dissolved organic carbon (DOC) < 0.5 mg/l
below limit of quantification
Mean · Epesses
Hydrogen carbonate 227 mg/l Mean · Epesses
Magnesium 9.7 mg/l Mean · Epesses
Potassium 0.9 mg/l Mean · Epesses
Total hardness 19 °fH Mean · Epesses

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Source: https://trinkwasser.ch/de/versorger/958/commune-de-bourg-en-lavaux/2558/epesses · 2024 · 2024 · retrieved on 07/08/2026

Postcodes in this zone: 1091

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

These values are more than a year old. The most recent analysis the water supplier has published for this zone dates from 31/12/2024. We have no newer values — which is why we show the latest available ones rather than none at all. They say nothing about how the water has changed since then.

Water hardness
8.5 °dH
Hardness range medium
Key values Grandvaux
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 1.55 mg/l 40 mg/l
4 %
Mean · Grandvaux
Escherichia coli (E. coli) 0 KBE/100ml 0/100 ml Maximum · Median 0 · Grandvaux
Sulphate 14 mg/l Mean · Grandvaux
Sodium 2.9 mg/l 200 mg/l
1 %
Mean · Grandvaux
Show all recorded parameters (20 — most recent value per parameter)

Microbiology (3)

Microbiology – Grandvaux
Parameter Value Parametric value Share of the parametric value Reference
Aerobic mesophilic bacteria 0 KBE/ml 300 1/ml Mean · Grandvaux
Escherichia coli (E. coli) 0 KBE/100ml 0/100 ml Maximum · Median 0 · Grandvaux
Intestinal enterococci 0 KBE/100ml 0/100 ml Maximum · Median 0 · Grandvaux

Chemical parameters (2)

Chemical parameters – Grandvaux
Parameter Value Parametric value Share of the parametric value Reference
Fluoride < 0.1 mg/l
below limit of quantification
1.5 mg/l
< 7 % *
Mean · Grandvaux
Nitrate 1.55 mg/l 40 mg/l
4 %
Mean · Grandvaux

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Metabolites (2)

Metabolites – Grandvaux
Parameter Value Parametric value Share of the parametric value Reference
Chlorothalonil metabolite R417888 < 0.01 µg/l
below limit of quantification
0.1 µg/l
< 10 % *
Mean · Grandvaux
Chlorothalonil metabolite R471811 < 0.01 µg/l
below limit of quantification
0.1 µg/l
< 10 % *
Mean · Grandvaux

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Indicator parameters (7)

Indicator parameters – Grandvaux
Parameter Value Parametric value Share of the parametric value Reference
Chloride 2.2 mg/l Mean · Grandvaux
Conductivity (25 °C) 300 µS/cm Mean · Grandvaux
pH 7.5 Mean · Grandvaux
Sodium 2.9 mg/l 200 mg/l
1 %
Mean · Grandvaux
Sulphate 14 mg/l Mean · Grandvaux
Temperature 15 °C Mean · Grandvaux
Turbidity 0.1 TE/F Mean · Grandvaux

Further parameters (6)

Further parameters – Grandvaux
Parameter Value Parametric value Share of the parametric value Reference
Calcium 52.5 mg/l Mean · Grandvaux
Dissolved organic carbon (DOC) < 0.5 mg/l
below limit of quantification
Mean · Grandvaux
Hydrogen carbonate 173 mg/l Mean · Grandvaux
Magnesium 4.9 mg/l Mean · Grandvaux
Potassium < 0.5 mg/l
below limit of quantification
Mean · Grandvaux
Total hardness 15.2 °fH Mean · Grandvaux

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Postcodes in this zone: 1091

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

These values are more than a year old. The most recent analysis the water supplier has published for this zone dates from 31/12/2024. We have no newer values — which is why we show the latest available ones rather than none at all. They say nothing about how the water has changed since then.

Water hardness
18.4 °dH
Hardness range hard
Key values Riex
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 18 mg/l 40 mg/l
45 %
Mean · Riex
Escherichia coli (E. coli) 0 KBE/100ml 0/100 ml Maximum · Median 0 · Riex
Sulphate 7 mg/l Mean · Riex
Sodium 10.1 mg/l 200 mg/l
5 %
Mean · Riex
Show all recorded parameters (20 — most recent value per parameter)

Microbiology (3)

Microbiology – Riex
Parameter Value Parametric value Share of the parametric value Reference
Aerobic mesophilic bacteria 0 KBE/ml 300 1/ml Mean · Riex
Escherichia coli (E. coli) 0 KBE/100ml 0/100 ml Maximum · Median 0 · Riex
Intestinal enterococci 0 KBE/100ml 0/100 ml Maximum · Median 0 · Riex

Chemical parameters (2)

Chemical parameters – Riex
Parameter Value Parametric value Share of the parametric value Reference
Fluoride < 0.1 mg/l
below limit of quantification
1.5 mg/l
< 7 % *
Mean · Riex
Nitrate 18 mg/l 40 mg/l
45 %
Mean · Riex

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Metabolites (2)

Metabolites – Riex
Parameter Value Parametric value Share of the parametric value Reference
Chlorothalonil metabolite R417888 0.009 µg/l 0.1 µg/l
9 %
Mean · Riex
Chlorothalonil metabolite R471811 0.038 µg/l 0.1 µg/l
38 %
Mean · Riex

Indicator parameters (7)

Indicator parameters – Riex
Parameter Value Parametric value Share of the parametric value Reference
Chloride 20.1 mg/l Mean · Riex
Conductivity (25 °C) 620 µS/cm Mean · Riex
pH 7.7 Mean · Riex
Sodium 10.1 mg/l 200 mg/l
5 %
Mean · Riex
Sulphate 7 mg/l Mean · Riex
Temperature 15 °C Mean · Riex
Turbidity 0.4 TE/F Mean · Riex

Further parameters (6)

Further parameters – Riex
Parameter Value Parametric value Share of the parametric value Reference
Calcium 90 mg/l Mean · Riex
Dissolved organic carbon (DOC) 0.5 mg/l Mean · Riex
Hydrogen carbonate 372 mg/l Mean · Riex
Magnesium 25.8 mg/l Mean · Riex
Potassium 1.7 mg/l Mean · Riex
Total hardness 32.9 °fH Mean · Riex

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Source: https://trinkwasser.ch/de/versorger/958/commune-de-bourg-en-lavaux/2557/riex · 2024 · 2024 · retrieved on 07/08/2026

Postcodes in this zone: 1091

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

These values are more than a year old. The most recent analysis the water supplier has published for this zone dates from 31/12/2024. We have no newer values — which is why we show the latest available ones rather than none at all. They say nothing about how the water has changed since then.

Water hardness
8.3 °dH
Hardness range soft
Key values Villette
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 1.4 mg/l 40 mg/l
3 %
Mean · Villette
Escherichia coli (E. coli) 0 KBE/100ml 0/100 ml Maximum · Median 0 · Villette
Sulphate 19 mg/l Mean · Villette
Sodium 2.9 mg/l 200 mg/l
1 %
Mean · Villette
Show all recorded parameters (20 — most recent value per parameter)

Microbiology (3)

Microbiology – Villette
Parameter Value Parametric value Share of the parametric value Reference
Aerobic mesophilic bacteria 0 KBE/ml 300 1/ml Mean · Villette
Escherichia coli (E. coli) 0 KBE/100ml 0/100 ml Maximum · Median 0 · Villette
Intestinal enterococci 0 KBE/100ml 0/100 ml Maximum · Median 0 · Villette

Chemical parameters (2)

Chemical parameters – Villette
Parameter Value Parametric value Share of the parametric value Reference
Fluoride < 0.1 mg/l
below limit of quantification
1.5 mg/l
< 7 % *
Mean · Villette
Nitrate 1.4 mg/l 40 mg/l
3 %
Mean · Villette

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Metabolites (2)

Metabolites – Villette
Parameter Value Parametric value Share of the parametric value Reference
Chlorothalonil metabolite R417888 < 0.01 µg/l
below limit of quantification
0.1 µg/l
< 10 % *
Mean · Villette
Chlorothalonil metabolite R471811 < 0.01 µg/l
below limit of quantification
0.1 µg/l
< 10 % *
Mean · Villette

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Indicator parameters (7)

Indicator parameters – Villette
Parameter Value Parametric value Share of the parametric value Reference
Chloride 2.2 mg/l Mean · Villette
Conductivity (25 °C) 318 µS/cm Mean · Villette
pH 7.9 Mean · Villette
Sodium 2.9 mg/l 200 mg/l
1 %
Mean · Villette
Sulphate 19 mg/l Mean · Villette
Temperature 17 °C Mean · Villette
Turbidity 0.1 TE/F Mean · Villette

Further parameters (6)

Further parameters – Villette
Parameter Value Parametric value Share of the parametric value Reference
Calcium 51 mg/l Mean · Villette
Dissolved organic carbon (DOC) < 0.5 mg/l
below limit of quantification
Mean · Villette
Hydrogen carbonate 161 mg/l Mean · Villette
Magnesium 4.9 mg/l Mean · Villette
Potassium < 0.5 mg/l
below limit of quantification
Mean · Villette
Total hardness 14.8 °fH Mean · Villette

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Postcodes in this zone: 1091

Frequently asked questions about drinking water in Aran, Chenaux, Grandvaux

How hard is the water in Aran, Chenaux, Grandvaux?
Commune de Bourg-en-Lavaux publishes a total hardness of 16.1 °fH for the supply zone Cully — that corresponds to 9 °dH. The hardness range is a classification under the German Detergents and Cleaning Products Act (soft below 8,4 °dH, medium 8,4 to 14 °dH, hard above that) and not a quality verdict — it indicates how much calcium and magnesium is dissolved in the water. Basis: 2024, retrieved on 07/08/2026.
How much nitrate is in the drinking water in Aran, Chenaux, Grandvaux?
Commune de Bourg-en-Lavaux publishes a nitrate value of 1.9 mg/l for the supply zone Cully. The statutory parametric value is 40 mg/l; the measured value represents 5 % of the parametric value. Basis: 2024, retrieved on 07/08/2026.
Who supplies the drinking water in Aran, Chenaux, Grandvaux?
Commune de Bourg-en-Lavaux. The values shown here come from the supply zone Cully and apply to the water the supplier delivers. What happens between the building connection and the tap — in old lead pipes, for example — is not covered by these analyses; information on that is provided by owners, the health authority or an examination by an accredited laboratory.

General questions — how current the data is, limit of quantification, parametric values, who is behind this site — are answered under Questions & answers.