Drinking water in Andervenne, Beesten, Freren, Messingen, Thuine
One supply zone, water supplier: Wasserverband Lingener Land.
How to read the share of the parametric value
Several samples per year: for chemical parameters the mean value is given, for microbiological ones the highest measured value. There the parametric value is zero — a single finding would disappear in the average, and it is precisely that finding which is the information. Which reference applies is stated in the last column of the table.
Wasserwerk Grumsmühlen
Wasserverband Lingener LandAssigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.
No date is given for these values. The water supplier publishes the analysis without a sampling date and without a report date. When the water was examined is not apparent from the source — we do not add a date and we do not estimate one. What is stated is therefore only when we retrieved the document.
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Nitrate | < 1,0 mg/l below limit of quantification | 50 mg/l | < 2 % * | Single value |
| Lead | < 0,001 mg/l below limit of quantification | 10 µg/l | < 10 % * | Single value |
| Sulphate | 93 mg/l | 250 mg/l | 37 % | Single value |
| Sodium | 15,92 mg/l | 200 mg/l | 8 % | Single value |
* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.
Show all recorded parameters (24 — most recent value per parameter)
Chemical parameters (13)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Antimony | < 0,001 mg/l below limit of quantification | 5 µg/l | < 20 % * | Single value |
| Arsenic | < 0,001 mg/l below limit of quantification | 10 µg/l | < 10 % * | Single value |
| Cadmium | < 0,0001 mg/l below limit of quantification | 3 µg/l | < 3 % * | Single value |
| Chromium | < 0,0005 mg/l below limit of quantification | 25 µg/l | < 2 % * | Single value |
| Cyanide | < 0,0005 mg/l below limit of quantification | 50 µg/l | < 1 % * | Single value |
| Fluoride | < 0,15 mg/l below limit of quantification | 1.5 mg/l | < 10 % * | Single value |
| Lead | < 0,001 mg/l below limit of quantification | 10 µg/l | < 10 % * | Single value |
| Mercury | < 0,0001 mg/l below limit of quantification | 1 µg/l | < 10 % * | Single value |
| Nickel | 0,001 mg/l | 20 µg/l | 5 % | Single value |
| Nitrate | < 1,0 mg/l below limit of quantification | 50 mg/l | < 2 % * | Single value |
| Nitrite | < 0,01 mg/l below limit of quantification | 0.5 mg/l | < 2 % * | Single value |
| Selenium | < 0,001 mg/l below limit of quantification | 10 µg/l | < 10 % * | Single value |
| Uranium | < 0,0001 µg/l below limit of quantification | 10 µg/l | < < 0.1 % * | Single value |
* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.
Indicator parameters (7)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Aluminium | < 0,005 mg/l below limit of quantification | 0.2 mg/l | < 3 % * | Single value |
| Ammonium | < 0,06 mg/l below limit of quantification | 0.5 mg/l | < 12 % * | Single value |
| Chloride | 31 mg/l | 250 mg/l | 12 % | Single value |
| Conductivity (25 °C) | 459 µS/cm | 2,790 µS/cm | — | Single value |
| pH | 7,92 - | 6,5–9,5 | — | Single value |
| Sodium | 15,92 mg/l | 200 mg/l | 8 % | Single value |
| Sulphate | 93 mg/l | 250 mg/l | 37 % | Single value |
* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.
Further parameters (4)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Calcium | 66,0 mg/l | — | — | Single value |
| Magnesium | 5,7 mg/l | — | — | Single value |
| Potassium | 2,7 mg/l | — | — | Single value |
| Total hardness | 10,5 °dH | — | — | Single value |
Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.
Postcodes in this zone: 49832
Frequently asked questions about drinking water in Andervenne, Beesten, Freren, Messingen, Thuine
- How hard is the water in Andervenne, Beesten, Freren, Messingen, Thuine?
- Wasserverband Lingener Land publishes a total hardness of 10.5 °dH for the supply zone Wasserwerk Grumsmühlen (hardness range medium). The hardness range is a classification under the German Detergents and Cleaning Products Act (soft below 8,4 °dH, medium 8,4 to 14 °dH, hard above that) and not a quality verdict — it indicates how much calcium and magnesium is dissolved in the water. Basis: Publication by the water supplier, retrieved on 11/07/2026.
- How much nitrate is in the drinking water in Andervenne, Beesten, Freren, Messingen, Thuine?
- Wasserverband Lingener Land publishes a nitrate value of < 1,0 mg/l for the supply zone Wasserwerk Grumsmühlen. The statutory parametric value is 50 mg/l; the measured value lies below it and cannot be specified more precisely below the limit of quantification. Basis: Publication by the water supplier, retrieved on 11/07/2026.
- Who supplies the drinking water in Andervenne, Beesten, Freren, Messingen, Thuine?
- Wasserverband Lingener Land. The values shown here come from the supply zone Wasserwerk Grumsmühlen and apply to the water the supplier delivers. What happens between the building connection and the tap — in old lead pipes, for example — is not covered by these analyses; information on that is provided by owners, the health authority or an examination by an accredited laboratory.
General questions — how current the data is, limit of quantification, parametric values, who is behind this site — are answered under Questions & answers.