Drinking water in Amstetten, Aschbach-Markt, Biberbach u.a.
9 supply zones — values can differ depending on the district. Below is the zone with the most documented parameters, the others collapsed underneath. To determine the exact match, look up the postcode.
How to read the share of the parametric value
Several samples per year: for chemical parameters the mean value is given, for microbiological ones the highest measured value. There the parametric value is zero — a single finding would disappear in the average, and it is precisely that finding which is the information. Which reference applies is stated in the last column of the table.
at-aschbach-markt gesamt
Gemeinde Aschbach Markt (WV Gemeinde Aschbach Markt)Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Nitrate | 5,34 mg/l | 50 mg/l | 11 % | Single value |
| Lead | <0,0010 mg/l below limit of quantification | 10 µg/l | < 10 % * | Single value |
| Sulphate | 6,9 mg/l | 250 mg/l | 3 % | Single value |
| Sodium | 3,20 mg/l | 200 mg/l | 2 % | Single value |
* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.
Show all recorded parameters (74 — most recent value per parameter)
Chemical parameters (33)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| 1,2-dichloroethane | <0,00020 (NWG) mg/l below limit of quantification | 3 µg/l | < 17 % * | Single value |
| Antimony | <0,0010 mg/l below limit of quantification | 5 µg/l | < 20 % * | Single value |
| Arsenic | <0,0010 mg/l below limit of quantification | 10 µg/l | < 10 % * | Single value |
| Benzene | <0,00010 (NWG) mg/l below limit of quantification | 1 µg/l | < 30 % * | Single value |
| Benzo(a)pyrene | <0,0000020 (NWG) mg/l below limit of quantification | 10 ng/l | < 50 % * | Single value |
| Benzo(b)fluoranthene | <0,0000020 (NWG) mg/l below limit of quantification | — | — | Single value |
| Benzo(ghi)perylene | <0,0000020 (NWG) mg/l below limit of quantification | — | — | Single value |
| Benzo(k)fluoranthene | <0,0000020 (NWG) mg/l below limit of quantification | — | — | Single value |
| Boron | <0,020 mg/l below limit of quantification | 1 mg/l | < 2 % * | Single value |
| Bromodichloromethane | <0,000030 (NWG) mg/l below limit of quantification | — | — | Single value |
| Cadmium | <0,00010 mg/l below limit of quantification | 5 µg/l | < 2 % * | Single value |
| Chromium | <0,001 mg/l below limit of quantification | 50 µg/l | < 2 % * | Single value |
| Copper | 0,0033 mg/l | 2 mg/l | 0.2 % | Single value |
| Dibromochloromethane | <0,000030 (NWG) mg/l below limit of quantification | — | — | Single value |
| Fluoride | 0,05 mg/l | 1.5 mg/l | 3 % | Single value |
| Indeno(1,2,3-cd)pyrene | <0,0000020 (NWG) mg/l below limit of quantification | — | — | Single value |
| Lead | <0,0010 mg/l below limit of quantification | 10 µg/l | < 10 % * | Single value |
| Mercury | <0,000010 mg/l below limit of quantification | 1 µg/l | < 1 % * | Single value |
| Nickel | <0,0010 mg/l below limit of quantification | 20 µg/l | < 5 % * | Single value |
| Nitrate | 5,34 mg/l | 50 mg/l | 11 % | Single value |
| Nitrate/50 + Nitrite/3 | 0,110 mg/l | — | — | Single value |
| Nitrite | <0,01 mg/l below limit of quantification | 0.1 mg/l | < 10 % * | Single value |
| Polycyclic aromatic hydrocarbons | <0,000050 mg/l below limit of quantification | 0.1 µg/l | < 50 % * | Single value |
| Selenium | <0,0010 mg/l below limit of quantification | 20 µg/l | < 5 % * | Single value |
| Tetrachloroethene | <0,00030 (NWG) mg/l below limit of quantification | — | — | Single value |
| Tetrachloroethene and Trichloroethene (sum) | <0,0010 mg/l below limit of quantification | 10 µg/l | < 10 % * | Single value |
| Tetrachloromethane | <0,00003 (NWG) mg/l below limit of quantification | — | — | Single value |
| Tribromomethane (bromoform) | <0,000030 (NWG) mg/l below limit of quantification | — | — | Single value |
| Trichloroethene | <0,00030 (NWG) mg/l below limit of quantification | — | — | Single value |
| Trichloromethane (chloroform) | <0,000030 (NWG) mg/l below limit of quantification | — | — | Single value |
| Trihalomethanes — Total | <0,000030 (NWG) mg/l below limit of quantification | 30 µg/l | < 0.3 % * | Single value |
| Uranium | 1,2 µg/l | 15 µg/l | 8 % | Single value |
| Vinyl chloride | <0,000050 (NWG) mg/l below limit of quantification | 0.5 µg/l | < 30 % * | Single value |
* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.
PFAS (18)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Perfluorobutane sulfonic acid (PFBS) | <0,0010 µg/l below limit of quantification | — | — | Single value |
| Perfluorobutanoic acid (PFBA) | <0,0010 µg/l below limit of quantification | — | — | Single value |
| Perfluorodecane sulfonic acid (PFDS) | <0,0010 µg/l below limit of quantification | — | — | Single value |
| Perfluorodecanoic acid (PFDA) | <0,0010 µg/l below limit of quantification | — | — | Single value |
| Perfluorododecanoic acid (PFDoDA) | <0,0010 µg/l below limit of quantification | — | — | Single value |
| Perfluoroheptane sulfonic acid (PFHpS) | <0,0010 µg/l below limit of quantification | — | — | Single value |
| Perfluoroheptanoic acid (PFHpA) | <0,0010 µg/l below limit of quantification | — | — | Single value |
| Perfluorohexane sulfonic acid (PFHxS) | <0,0010 µg/l below limit of quantification | — | — | Single value |
| Perfluorohexanoic acid (PFHxA) | <0,0010 µg/l below limit of quantification | — | — | Single value |
| Perfluorononane sulfonic acid (PFNS) | <0,0010 µg/l below limit of quantification | — | — | Single value |
| Perfluorononanoic acid (PFNA) | <0,0010 µg/l below limit of quantification | — | — | Single value |
| Perfluorooctanesulfonic acid (PFOS) | <0,0010 µg/l below limit of quantification | — | — | Single value |
| Perfluorooctanoic acid (PFOA) | <0,0010 µg/l below limit of quantification | — | — | Single value |
| Perfluoropentanesulfonic acid (PFPeS) | <0,0010 µg/l below limit of quantification | — | — | Single value |
| Perfluoropentanoic acid (PFPeA) | <0,0010 µg/l below limit of quantification | — | — | Single value |
| Perfluorotridecanoic acid (PFTrDA) | <0,0010 µg/l below limit of quantification | — | — | Single value |
| Perfluoroundecanesulfonic acid (PFUnDS) | <0,0010 µg/l below limit of quantification | — | — | Single value |
| Perfluoroundecanoic acid (PFUnDA) | <0,0010 µg/l below limit of quantification | — | — | Single value |
Indicator parameters (11)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Aluminium | <0,01 mg/l below limit of quantification | 0.2 mg/l | < 5 % * | Single value |
| Ammonium | 0,027 mg/l | 0.5 mg/l | 5 % | Single value |
| Chloride | 4,8 mg/l | 200 mg/l | 2 % | Single value |
| Colour | <0,5 m-1 below limit of quantification | — | — | Single value |
| Iron | <0,01 mg/l below limit of quantification | 0.2 mg/l | < 5 % * | Single value |
| Manganese | <0,005 mg/l below limit of quantification | 50 µg/l | < 10 % * | Single value |
| Oxidisability | <0,25 (+) mg O2/l below limit of quantification | 5 mg/l | — | Single value |
| Sodium | 3,20 mg/l | 200 mg/l | 2 % | Single value |
| Sulphate | 6,9 mg/l | 250 mg/l | 3 % | Single value |
| Total organic carbon (TOC) | 0,60 mg/l | — | — | Single value |
| Turbidity | <0,25 NTU below limit of quantification | — | — | Single value |
* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.
Further parameters (12)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| 1,1-Dichloroethene | <0,000030 (NWG) mg/l below limit of quantification | — | — | Single value |
| Acid capacity to pH 4.3 | 4,79 mmol/l | — | — | Single value |
| Barium | <0,010 mg/l below limit of quantification | — | — | Single value |
| Calcium | 55,7 mg/l | 400 mg/l | 14 % | Single value |
| Carbonate hardness | 13,3 °dH | — | — | Single value |
| Hydrogen carbonate | 289 mg/l | — | — | Single value |
| Magnesium | 25,8 mg/l | 150 mg/l | 17 % | Single value |
| Phosphate | <0,015 mg/l below limit of quantification | — | — | Single value |
| Potassium | 0,65 mg/l | 50 mg/l | 1 % | Single value |
| Spectral absorption coefficient 254 nm (SAC 254) | 1,15 m-1 | — | — | Single value |
| Total hardness | 2,45 mmol/l | — | — | Single value |
| Zinc | <0,0010 mg/l below limit of quantification | — | — | Single value |
Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.
Postcodes in this zone: 3361
Show 8 more supply zones
Hochbehälter Kreuzberg (Analyse 301282)
Gemeinde Aschbach Markt (WV Gemeinde Aschbach Markt)Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Escherichia coli (E. coli) | 0 KBE/100ml | 0/100 ml | — | Single value · Hochbehälter Kreuzberg (Analyse 301282) |
Show all recorded parameters (11 — most recent value per parameter)
Microbiology (2)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Escherichia coli (E. coli) | 0 KBE/100ml | 0/100 ml | — | Single value · Hochbehälter Kreuzberg (Analyse 301282) |
| Intestinal enterococci | 0 KBE/100ml | 0/100 ml | — | Single value · Hochbehälter Kreuzberg (Analyse 301282) |
Indicator parameters (9)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Coliform bacteria | 0 KBE/100ml | 0/100 ml | — | Single value · Hochbehälter Kreuzberg (Analyse 301282) |
| Colony count 22 °C | 13 KBE/ml | 100 1/ml | — | Single value · Hochbehälter Kreuzberg (Analyse 301282) |
| Colony count 36 °C | 7 KBE/ml | 20 1/ml | — | Single value · Hochbehälter Kreuzberg (Analyse 301282) |
| Colour | farblos, klar, ohne Bodensatz | — | — | Single value · Hochbehälter Kreuzberg (Analyse 301282) |
| Conductivity (25 °C) | 422 µS/cm | 2,500 µS/cm | — | Single value · Hochbehälter Kreuzberg (Analyse 301282) |
| Odour | geruchlos | — | — | Single value · Hochbehälter Kreuzberg (Analyse 301282) |
| pH | 7,7 - | 6,5–9,5 | — | Single value · Hochbehälter Kreuzberg (Analyse 301282) |
| Taste | geschmacklos | — | — | Single value · Hochbehälter Kreuzberg (Analyse 301282) |
| Temperature | 7,1 °C | — | — | Single value · Hochbehälter Kreuzberg (Analyse 301282) |
Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.
Postcodes in this zone: 3361
WV Gemeinde Aschbach Markt / Ortsnetz Aschbach-Markt
Gemeinde Aschbach Markt (WV Gemeinde Aschbach Markt)Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Escherichia coli (E. coli) | 0 KBE/100ml | 0/100 ml | — | Single value |
Show all recorded parameters (13 — most recent value per parameter)
Microbiology (3)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Escherichia coli (E. coli) | 0 KBE/100ml | 0/100 ml | — | Single value |
| Intestinal enterococci | 0 KBE/100ml | 0/100 ml | — | Single value |
| Pseudomonas aeruginosa | 0 KBE/100ml | 0/100 ml | — | Single value |
Indicator parameters (10)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Clostridium perfringens (including spores) | 0 KBE/100ml | 0/100 ml | — | Single value |
| Coliform bacteria | 0 KBE/100ml | 0/100 ml | — | Single value |
| Colony count 22 °C | 4 KBE/ml | 100 1/ml | — | Single value |
| Colony count 36 °C | 1 KBE/ml | 20 1/ml | — | Single value |
| Colour | farblos, klar, ohne Bodensatz | — | — | Single value |
| Conductivity (25 °C) | 418 µS/cm | 2,500 µS/cm | — | Single value |
| Odour | geruchlos | — | — | Single value |
| pH | 7,6 - | 6,5–9,5 | — | Single value |
| Taste | geschmacklos | — | — | Single value |
| Temperature | 8,1 °C | — | — | Single value |
Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.
Postcodes in this zone: 3361
WV Gemeinde Aschbach Markt, Ortsnetz Brücke
Gemeinde Aschbach Markt (WV Gemeinde Aschbach Markt)Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Escherichia coli (E. coli) | 0 KBE/100ml | 0/100 ml | — | Single value |
Show all recorded parameters (11 — most recent value per parameter)
Microbiology (2)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Escherichia coli (E. coli) | 0 KBE/100ml | 0/100 ml | — | Single value |
| Intestinal enterococci | 0 KBE/100ml | 0/100 ml | — | Single value |
Indicator parameters (9)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Coliform bacteria | 0 KBE/100ml | 0/100 ml | — | Single value |
| Colony count 22 °C | 2 KBE/ml | 100 1/ml | — | Single value |
| Colony count 36 °C | 1 KBE/ml | 20 1/ml | — | Single value |
| Colour | farblos, klar, ohne Bodensatz | — | — | Single value |
| Conductivity (25 °C) | 418 µS/cm | 2,500 µS/cm | — | Single value |
| Odour | geruchlos | — | — | Single value |
| pH | 7,6 - | 6,5–9,5 | — | Single value |
| Taste | geschmacklos | — | — | Single value |
| Temperature | 6,1 °C | — | — | Single value |
Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.
Postcodes in this zone: 3361
WV Gemeinde Aschbach Markt, Ortsnetz Markt- Neufeld
Gemeinde Aschbach Markt (WV Gemeinde Aschbach Markt)Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Escherichia coli (E. coli) | 0 KBE/100ml not detectable | 0/100 ml | — | Single value |
Show all recorded parameters (11 — most recent value per parameter)
Microbiology (2)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Escherichia coli (E. coli) | 0 KBE/100ml not detectable | 0/100 ml | — | Single value |
| Intestinal enterococci | 0 KBE/100ml not detectable | 0/100 ml | — | Single value |
Indicator parameters (9)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Coliform bacteria | 0 KBE/100ml not detectable | 0/100 ml | — | Single value |
| Colony count 22 °C | 5 KBE/ml | 100 1/ml | — | Single value |
| Colony count 36 °C | 0 KBE/ml not detectable | 20 1/ml | — | Single value |
| Colour | farblos, klar, ohne Bodensatz | — | — | Single value |
| Conductivity (25 °C) | 417 µS/cm | 2,500 µS/cm | — | Single value |
| Odour | geruchlos | — | — | Single value |
| pH | 7,5 - | 6,5–9,5 | — | Single value |
| Taste | geschmacklos | — | — | Single value |
| Temperature | 5,7 °C | — | — | Single value |
Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.
Postcodes in this zone: 3361
WV Gemeinde Aschbach Markt / Ortsnetz Riesing / Aschbach Dorf
Gemeinde Aschbach Markt (WV Gemeinde Aschbach Markt)Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Escherichia coli (E. coli) | 0 KBE/100ml | 0/100 ml | — | Single value |
Show all recorded parameters (11 — most recent value per parameter)
Microbiology (2)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Escherichia coli (E. coli) | 0 KBE/100ml | 0/100 ml | — | Single value |
| Intestinal enterococci | 0 KBE/100ml | 0/100 ml | — | Single value |
Indicator parameters (9)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Coliform bacteria | 0 KBE/100ml | 0/100 ml | — | Single value |
| Colony count 22 °C | 3 KBE/ml | 100 1/ml | — | Single value |
| Colony count 36 °C | 0 KBE/ml | 20 1/ml | — | Single value |
| Colour | farblos, klar, ohne Bodensatz | — | — | Single value |
| Conductivity (25 °C) | 416 µS/cm | 2,500 µS/cm | — | Single value |
| Odour | geruchlos | — | — | Single value |
| pH | 7,5 - | 6,5–9,5 | — | Single value |
| Taste | geschmacklos | — | — | Single value |
| Temperature | 7,2 °C | — | — | Single value |
Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.
Postcodes in this zone: 3361
WV Gemeinde Aschbach Markt, Ortsnetz Samesbruck (Entnahmestelle WL-619/004121, Probenahmestelle Al WH Waschküche,WB)
Gemeinde Aschbach Markt (WV Gemeinde Aschbach Markt)Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Escherichia coli (E. coli) | 0 KBE/100ml | 0/100 ml | — | Single value |
Show all recorded parameters (11 — most recent value per parameter)
Microbiology (2)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Escherichia coli (E. coli) | 0 KBE/100ml | 0/100 ml | — | Single value |
| Intestinal enterococci | 0 KBE/100ml | 0/100 ml | — | Single value |
Indicator parameters (9)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Coliform bacteria | 0 KBE/100ml | 0/100 ml | — | Single value |
| Colony count 22 °C | 2 KBE/ml | 100 1/ml | — | Single value |
| Colony count 36 °C | 1 KBE/ml | 20 1/ml | — | Single value |
| Colour | farblos, klar, ohne Bodensatz | — | — | Single value |
| Conductivity (25 °C) | 422 µS/cm | 2,500 µS/cm | — | Single value |
| Odour | geruchlos | — | — | Single value |
| pH | 7,6 - | 6,5–9,5 | — | Single value |
| Taste | geschmacklos | — | — | Single value |
| Temperature | 6,0 °C | — | — | Single value |
Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.
Postcodes in this zone: 3361
WV Gemeinde Aschbach Markt, Übergabeschacht Krenstetten
Gemeinde Aschbach Markt (WV Gemeinde Aschbach Markt)Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Escherichia coli (E. coli) | 0 KBE/100ml | 0/100 ml | — | Single value |
Show all recorded parameters (11 — most recent value per parameter)
Microbiology (2)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Escherichia coli (E. coli) | 0 KBE/100ml | 0/100 ml | — | Single value |
| Intestinal enterococci | 0 KBE/100ml | 0/100 ml | — | Single value |
Indicator parameters (9)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Coliform bacteria | 0 KBE/100ml | 0/100 ml | — | Single value |
| Colony count 22 °C | 0 KBE/ml | 100 1/ml | — | Single value |
| Colony count 36 °C | 1 KBE/ml | 20 1/ml | — | Single value |
| Colour | farblos, klar, ohne Bodensatz | — | — | Single value |
| Conductivity (25 °C) | 418 µS/cm | 2,500 µS/cm | — | Single value |
| Odour | geruchlos | — | — | Single value |
| pH | 7,6 | 6,5–9,5 | — | Single value |
| Taste | geschmacklos | — | — | Single value |
| Temperature | 6,0 °C | — | — | Single value |
Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.
Postcodes in this zone: 3361
Analyse 301281
Gemeinde Aschbach Markt (WV Gemeinde Aschbach Markt)Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.
No core values are available for this zone yet.
Show all recorded parameters (1 — most recent value per parameter)
Further parameters (1)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Spectral absorption coefficient 254 nm (SAC 254) | 0,59 m-1 | — | — | Single value · Analyse 301281 |
Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.
Postcodes in this zone: 3361
Frequently asked questions about drinking water in Amstetten, Aschbach-Markt, Biberbach u.a.
- How hard is the water in Amstetten, Aschbach-Markt, Biberbach u.a.?
- Gemeinde Aschbach Markt (WV Gemeinde Aschbach Markt) publishes a total hardness of 2,45 mmol/l for the supply zone at-aschbach-markt gesamt — that corresponds to 13.7 °dH. The hardness range is a classification under the German Detergents and Cleaning Products Act (soft below 8,4 °dH, medium 8,4 to 14 °dH, hard above that) and not a quality verdict — it indicates how much calcium and magnesium is dissolved in the water. Basis: 18.03.2026, retrieved on 11/08/2026.
- How much nitrate is in the drinking water in Amstetten, Aschbach-Markt, Biberbach u.a.?
- Gemeinde Aschbach Markt (WV Gemeinde Aschbach Markt) publishes a nitrate value of 5,34 mg/l for the supply zone at-aschbach-markt gesamt. The statutory parametric value is 50 mg/l; the measured value represents 11 % of the parametric value. Basis: 18.03.2026, retrieved on 11/08/2026.
- Who supplies the drinking water in Amstetten, Aschbach-Markt, Biberbach u.a.?
- Gemeinde Aschbach Markt (WV Gemeinde Aschbach Markt). The values shown here come from the supply zone at-aschbach-markt gesamt and apply to the water the supplier delivers. What happens between the building connection and the tap — in old lead pipes, for example — is not covered by these analyses; information on that is provided by owners, the health authority or an examination by an accredited laboratory.
General questions — how current the data is, limit of quantification, parametric values, who is behind this site — are answered under Questions & answers.