Skip to content
maunawai.info

Drinking water in Amorbach

4 supply zones — values can differ depending on the district. Below is the zone with the most documented parameters, the others collapsed underneath. To determine the exact match, look up the postcode.

How to read the share of the parametric value

12 % Share of the parametric value. The proportion of the permitted maximum that the measured value uses — here 12 %, so just over an eighth.
< 10 % * Below the limit of quantification. The substance was not detectable. The mark shows where the detection limit lies relative to the parametric value — the actual share of the parametric value is below that.

Several samples per year: for chemical parameters the mean value is given, for microbiological ones the highest measured value. There the parametric value is zero — a single finding would disappear in the average, and it is precisely that finding which is the information. Which reference applies is stated in the last column of the table.

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

These values are more than a year old. The most recent analysis the water supplier has published for this zone dates from 31/12/2022. We have no newer values — which is why we show the latest available ones rather than none at all. They say nothing about how the water has changed since then.

Water hardness
14,4 °d
Hardness range hart
Key values Dahenfeld Zone 4
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 7,3 mg/l 50 mg/l
15 %
Single value · Dahenfeld Zone 4
Lead < 0,001 mg/l
below limit of quantification
10 µg/l
< 10 % *
Single value · Dahenfeld Zone 4
Sulphate 77,0 mg/l 250 mg/l
31 %
Single value · Dahenfeld Zone 4
Sodium 7,1 mg/l 200 mg/l
4 %
Single value · Dahenfeld Zone 4

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Show all recorded parameters (19 — most recent value per parameter)

Chemical parameters (9)

Chemical parameters – Dahenfeld Zone 4
Parameter Value Parametric value Share of the parametric value Reference
Arsenic < 0,001 mg/l
below limit of quantification
10 µg/l
< 10 % *
Single value · Dahenfeld Zone 4
Cadmium < 0,0002 mg/l
below limit of quantification
3 µg/l
< 7 % *
Single value · Dahenfeld Zone 4
Chromium < 0,0005 mg/l
below limit of quantification
25 µg/l
< 2 % *
Single value · Dahenfeld Zone 4
Fluoride < 0,10 mg/l
below limit of quantification
1.5 mg/l
< 7 % *
Single value · Dahenfeld Zone 4
Lead < 0,001 mg/l
below limit of quantification
10 µg/l
< 10 % *
Single value · Dahenfeld Zone 4
Mercury < 0,0001 mg/l
below limit of quantification
1 µg/l
< 10 % *
Single value · Dahenfeld Zone 4
Nitrate 7,3 mg/l 50 mg/l
15 %
Single value · Dahenfeld Zone 4
Nitrite < 0,01 mg/l
below limit of quantification
0.5 mg/l
< 2 % *
Single value · Dahenfeld Zone 4
Pesticides < 0,025 µg/l
below limit of quantification
0.1 µg/l
< 25 % *
Single value · Dahenfeld Zone 4

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Indicator parameters (5)

Indicator parameters – Dahenfeld Zone 4
Parameter Value Parametric value Share of the parametric value Reference
Ammonium 0,02 mg/l 0.5 mg/l
4 %
Single value · Dahenfeld Zone 4
Iron < 0,010 mg/l
below limit of quantification
0.2 mg/l
< 5 % *
Single value · Dahenfeld Zone 4
pH 7,72 6,5–9,5 Single value · Dahenfeld Zone 4
Sodium 7,1 mg/l 200 mg/l
4 %
Single value · Dahenfeld Zone 4
Sulphate 77,0 mg/l 250 mg/l
31 %
Single value · Dahenfeld Zone 4

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Further parameters (5)

Further parameters – Dahenfeld Zone 4
Parameter Value Parametric value Share of the parametric value Reference
Calcium 74,7 mg/l Single value · Dahenfeld Zone 4
Hardness range (WRMG) hart Single value · Dahenfeld Zone 4
Magnesium 17 mg/l Single value · Dahenfeld Zone 4
Potassium 1,5 mg/l Single value · Dahenfeld Zone 4
Total hardness 14,4 °d Single value · Dahenfeld Zone 4

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Postcodes in this zone: 63916

Show 3 more supply zones

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

These values are more than a year old. The most recent analysis the water supplier has published for this zone dates from 31/12/2022. We have no newer values — which is why we show the latest available ones rather than none at all. They say nothing about how the water has changed since then.

Water hardness
15,4 °d
Hardness range hart
Key values Neckarsulm Zone 1
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 7,8 mg/l 50 mg/l
16 %
Single value · Neckarsulm Zone 1
Lead < 0,001 mg/l
below limit of quantification
10 µg/l
< 10 % *
Single value · Neckarsulm Zone 1
Sulphate 54,6 mg/l 250 mg/l
22 %
Single value · Neckarsulm Zone 1
Sodium 14,0 mg/l 200 mg/l
7 %
Single value · Neckarsulm Zone 1

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Show all recorded parameters (19 — most recent value per parameter)

Chemical parameters (9)

Chemical parameters – Neckarsulm Zone 1
Parameter Value Parametric value Share of the parametric value Reference
Arsenic < 0,001 mg/l
below limit of quantification
10 µg/l
< 10 % *
Single value · Neckarsulm Zone 1
Cadmium < 0,0002 mg/l
below limit of quantification
3 µg/l
< 7 % *
Single value · Neckarsulm Zone 1
Chromium < 0,0005 mg/l
below limit of quantification
25 µg/l
< 2 % *
Single value · Neckarsulm Zone 1
Fluoride < 0,10 mg/l
below limit of quantification
1.5 mg/l
< 7 % *
Single value · Neckarsulm Zone 1
Lead < 0,001 mg/l
below limit of quantification
10 µg/l
< 10 % *
Single value · Neckarsulm Zone 1
Mercury < 0,0001 mg/l
below limit of quantification
1 µg/l
< 10 % *
Single value · Neckarsulm Zone 1
Nitrate 7,8 mg/l 50 mg/l
16 %
Single value · Neckarsulm Zone 1
Nitrite < 0,01 mg/l
below limit of quantification
0.5 mg/l
< 2 % *
Single value · Neckarsulm Zone 1
Pesticides < 0,025 µg/l
below limit of quantification
0.1 µg/l
< 25 % *
Single value · Neckarsulm Zone 1

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Indicator parameters (5)

Indicator parameters – Neckarsulm Zone 1
Parameter Value Parametric value Share of the parametric value Reference
Ammonium < 0,01 mg/l
below limit of quantification
0.5 mg/l
< 2 % *
Single value · Neckarsulm Zone 1
Iron < 0,010 mg/l
below limit of quantification
0.2 mg/l
< 5 % *
Single value · Neckarsulm Zone 1
pH 7,34 6,5–9,5 Single value · Neckarsulm Zone 1
Sodium 14,0 mg/l 200 mg/l
7 %
Single value · Neckarsulm Zone 1
Sulphate 54,6 mg/l 250 mg/l
22 %
Single value · Neckarsulm Zone 1

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Further parameters (5)

Further parameters – Neckarsulm Zone 1
Parameter Value Parametric value Share of the parametric value Reference
Calcium 84,7 mg/l Single value · Neckarsulm Zone 1
Hardness range (WRMG) hart Single value · Neckarsulm Zone 1
Magnesium 15,3 mg/l Single value · Neckarsulm Zone 1
Potassium 1,8 mg/l Single value · Neckarsulm Zone 1
Total hardness 15,4 °d Single value · Neckarsulm Zone 1

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Postcodes in this zone: 63916

Neckarsulm Zone 2 + Amorbach

Stadtwerke Neckarsulm GmbH

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

These values are more than a year old. The most recent analysis the water supplier has published for this zone dates from 31/12/2022. We have no newer values — which is why we show the latest available ones rather than none at all. They say nothing about how the water has changed since then.

Water hardness
17,2 °d
Hardness range hart
Key values Neckarsulm Zone 2 + Amorbach
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 9,7 mg/l 50 mg/l
19 %
Single value · Neckarsulm Zone 2 + Amorbach
Lead < 0,001 mg/l
below limit of quantification
10 µg/l
< 10 % *
Single value · Neckarsulm Zone 2 + Amorbach
Sulphate 98,7 mg/l 250 mg/l
39 %
Single value · Neckarsulm Zone 2 + Amorbach
Sodium 7,6 mg/l 200 mg/l
4 %
Single value · Neckarsulm Zone 2 + Amorbach

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Show all recorded parameters (19 — most recent value per parameter)

Chemical parameters (9)

Chemical parameters – Neckarsulm Zone 2 + Amorbach
Parameter Value Parametric value Share of the parametric value Reference
Arsenic < 0,001 mg/l
below limit of quantification
10 µg/l
< 10 % *
Single value · Neckarsulm Zone 2 + Amorbach
Cadmium < 0,0002 mg/l
below limit of quantification
3 µg/l
< 7 % *
Single value · Neckarsulm Zone 2 + Amorbach
Chromium < 0,0005 mg/l
below limit of quantification
25 µg/l
< 2 % *
Single value · Neckarsulm Zone 2 + Amorbach
Fluoride 0,12 mg/l 1.5 mg/l
8 %
Single value · Neckarsulm Zone 2 + Amorbach
Lead < 0,001 mg/l
below limit of quantification
10 µg/l
< 10 % *
Single value · Neckarsulm Zone 2 + Amorbach
Mercury < 0,0001 mg/l
below limit of quantification
1 µg/l
< 10 % *
Single value · Neckarsulm Zone 2 + Amorbach
Nitrate 9,7 mg/l 50 mg/l
19 %
Single value · Neckarsulm Zone 2 + Amorbach
Nitrite < 0,01 mg/l
below limit of quantification
0.5 mg/l
< 2 % *
Single value · Neckarsulm Zone 2 + Amorbach
Pesticides < 0,025 µg/l
below limit of quantification
0.1 µg/l
< 25 % *
Single value · Neckarsulm Zone 2 + Amorbach

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Indicator parameters (5)

Indicator parameters – Neckarsulm Zone 2 + Amorbach
Parameter Value Parametric value Share of the parametric value Reference
Ammonium < 0,01 mg/l
below limit of quantification
0.5 mg/l
< 2 % *
Single value · Neckarsulm Zone 2 + Amorbach
Iron < 0,010 mg/l
below limit of quantification
0.2 mg/l
< 5 % *
Single value · Neckarsulm Zone 2 + Amorbach
pH 7,67 6,5–9,5 Single value · Neckarsulm Zone 2 + Amorbach
Sodium 7,6 mg/l 200 mg/l
4 %
Single value · Neckarsulm Zone 2 + Amorbach
Sulphate 98,7 mg/l 250 mg/l
39 %
Single value · Neckarsulm Zone 2 + Amorbach

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Further parameters (5)

Further parameters – Neckarsulm Zone 2 + Amorbach
Parameter Value Parametric value Share of the parametric value Reference
Calcium 86,2 mg/l Single value · Neckarsulm Zone 2 + Amorbach
Hardness range (WRMG) hart Single value · Neckarsulm Zone 2 + Amorbach
Magnesium 22,2 mg/l Single value · Neckarsulm Zone 2 + Amorbach
Potassium 1,6 mg/l Single value · Neckarsulm Zone 2 + Amorbach
Total hardness 17,2 °d Single value · Neckarsulm Zone 2 + Amorbach

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Postcodes in this zone: 63916

Obereisesheim Zone 5

Stadtwerke Neckarsulm GmbH

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

These values are more than a year old. The most recent analysis the water supplier has published for this zone dates from 31/12/2022. We have no newer values — which is why we show the latest available ones rather than none at all. They say nothing about how the water has changed since then.

Water hardness
10,5 °d
Hardness range mittel
Key values Obereisesheim Zone 5
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 14,0 mg/l 50 mg/l
28 %
Single value · Obereisesheim Zone 5
Lead < 0,001 mg/l
below limit of quantification
10 µg/l
< 10 % *
Single value · Obereisesheim Zone 5
Sulphate 16,6 mg/l 250 mg/l
7 %
Single value · Obereisesheim Zone 5
Sodium 16,0 mg/l 200 mg/l
8 %
Single value · Obereisesheim Zone 5

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Show all recorded parameters (19 — most recent value per parameter)

Chemical parameters (9)

Chemical parameters – Obereisesheim Zone 5
Parameter Value Parametric value Share of the parametric value Reference
Arsenic < 0,001 mg/l
below limit of quantification
10 µg/l
< 10 % *
Single value · Obereisesheim Zone 5
Cadmium < 0,0002 mg/l
below limit of quantification
3 µg/l
< 7 % *
Single value · Obereisesheim Zone 5
Chromium < 0,0005 mg/l
below limit of quantification
25 µg/l
< 2 % *
Single value · Obereisesheim Zone 5
Fluoride < 0,10 mg/l
below limit of quantification
1.5 mg/l
< 7 % *
Single value · Obereisesheim Zone 5
Lead < 0,001 mg/l
below limit of quantification
10 µg/l
< 10 % *
Single value · Obereisesheim Zone 5
Mercury < 0,0001 mg/l
below limit of quantification
1 µg/l
< 10 % *
Single value · Obereisesheim Zone 5
Nitrate 14,0 mg/l 50 mg/l
28 %
Single value · Obereisesheim Zone 5
Nitrite < 0,01 mg/l
below limit of quantification
0.5 mg/l
< 2 % *
Single value · Obereisesheim Zone 5
Pesticides < 0,025 µg/l
below limit of quantification
0.1 µg/l
< 25 % *
Single value · Obereisesheim Zone 5

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Indicator parameters (5)

Indicator parameters – Obereisesheim Zone 5
Parameter Value Parametric value Share of the parametric value Reference
Ammonium 0,02 mg/l 0.5 mg/l
4 %
Single value · Obereisesheim Zone 5
Iron < 0,010 mg/l
below limit of quantification
0.2 mg/l
< 5 % *
Single value · Obereisesheim Zone 5
pH 7,71 6,5–9,5 Single value · Obereisesheim Zone 5
Sodium 16,0 mg/l 200 mg/l
8 %
Single value · Obereisesheim Zone 5
Sulphate 16,6 mg/l 250 mg/l
7 %
Single value · Obereisesheim Zone 5

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Further parameters (5)

Further parameters – Obereisesheim Zone 5
Parameter Value Parametric value Share of the parametric value Reference
Calcium 60,4 mg/l Single value · Obereisesheim Zone 5
Hardness range (WRMG) mittel Single value · Obereisesheim Zone 5
Magnesium 8,8 mg/l Single value · Obereisesheim Zone 5
Potassium 2,0 mg/l Single value · Obereisesheim Zone 5
Total hardness 10,5 °d Single value · Obereisesheim Zone 5

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Postcodes in this zone: 63916

Frequently asked questions about drinking water in Amorbach

How hard is the water in Amorbach?
Stadtwerke Neckarsulm GmbH publishes the hardness range hart for the supply zone Dahenfeld Zone 4. The hardness range is a classification under the German Detergents and Cleaning Products Act (soft below 8,4 °dH, medium 8,4 to 14 °dH, hard above that) and not a quality verdict — it indicates how much calcium and magnesium is dissolved in the water. Basis: Publication by the water supplier, retrieved on 11/07/2026.
How much nitrate is in the drinking water in Amorbach?
Stadtwerke Neckarsulm GmbH publishes a nitrate value of 7,3 mg/l for the supply zone Dahenfeld Zone 4. The statutory parametric value is 50 mg/l; the measured value represents 15 % of the parametric value. Basis: Publication by the water supplier, retrieved on 11/07/2026.
Who supplies the drinking water in Amorbach?
Stadtwerke Neckarsulm GmbH. The values shown here come from the supply zone Dahenfeld Zone 4 and apply to the water the supplier delivers. What happens between the building connection and the tap — in old lead pipes, for example — is not covered by these analyses; information on that is provided by owners, the health authority or an examination by an accredited laboratory.

General questions — how current the data is, limit of quantification, parametric values, who is behind this site — are answered under Questions & answers.