Skip to content
maunawai.info

Drinking water in Allenwinden

One supply zone, water supplier: Wassergenossenschaft Allenwinden.

How to read the share of the parametric value

12 % Share of the parametric value. The proportion of the permitted maximum that the measured value uses — here 12 %, so just over an eighth.
< 10 % * Below the limit of quantification. The substance was not detectable. The mark shows where the detection limit lies relative to the parametric value — the actual share of the parametric value is below that.

Several samples per year: for chemical parameters the mean value is given, for microbiological ones the highest measured value. There the parametric value is zero — a single finding would disappear in the average, and it is precisely that finding which is the information. Which reference applies is stated in the last column of the table.

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

Water hardness
18.8 °dH
Hardness range hard
Key values Allenwinden
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 9.1 mg/l 40 mg/l
23 %
Mean · Allenwinden
Escherichia coli (E. coli) 3 KBE/100ml 0/100 ml above the parametric value — this parameter must not be detectable Maximum · Median 1.5 · Allenwinden

An exceedance of a parametric value does not automatically mean a health risk; the statutory parametric values include safety margins. Assessment and any measures are the responsibility of the competent health authority of the respective country.

Show all recorded parameters (7 — most recent value per parameter)

Microbiology (3)

Microbiology – Allenwinden
Parameter Value Parametric value Share of the parametric value Reference
Aerobic mesophilic bacteria 4.77 KBE/ml 300 1/ml Mean · Allenwinden
Escherichia coli (E. coli) 3 KBE/100ml 0/100 ml above the parametric value — this parameter must not be detectable Maximum · Median 1.5 · Allenwinden
Intestinal enterococci nn
not detectable
Unit not stated in the document
0/100 ml Maximum · Median nn · Allenwinden

An exceedance of a parametric value does not automatically mean a health risk; the statutory parametric values include safety margins. Assessment and any measures are the responsibility of the competent health authority of the respective country.

Chemical parameters (1)

Chemical parameters – Allenwinden
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 9.1 mg/l 40 mg/l
23 %
Mean · Allenwinden

Further parameters (3)

Further parameters – Allenwinden
Parameter Value Parametric value Share of the parametric value Reference
Calcium 116.8 mg/l Mean · Allenwinden
Magnesium 11.1 mg/l Mean · Allenwinden
Total hardness 33.6 °fH Mean · Allenwinden

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Postcodes in this zone: 6319

Frequently asked questions about drinking water in Allenwinden

How hard is the water in Allenwinden?
Wassergenossenschaft Allenwinden publishes a total hardness of 33.6 °fH for the supply zone Allenwinden — that corresponds to 18.8 °dH. The hardness range is a classification under the German Detergents and Cleaning Products Act (soft below 8,4 °dH, medium 8,4 to 14 °dH, hard above that) and not a quality verdict — it indicates how much calcium and magnesium is dissolved in the water. Basis: 2025, retrieved on 07/08/2026.
How much nitrate is in the drinking water in Allenwinden?
Wassergenossenschaft Allenwinden publishes a nitrate value of 9.1 mg/l for the supply zone Allenwinden. The statutory parametric value is 40 mg/l; the measured value represents 23 % of the parametric value. Basis: 2025, retrieved on 07/08/2026.
Who supplies the drinking water in Allenwinden?
Wassergenossenschaft Allenwinden. The values shown here come from the supply zone Allenwinden and apply to the water the supplier delivers. What happens between the building connection and the tap — in old lead pipes, for example — is not covered by these analyses; information on that is provided by owners, the health authority or an examination by an accredited laboratory.

General questions — how current the data is, limit of quantification, parametric values, who is behind this site — are answered under Questions & answers.