Drinking water in Aeschi SO, Bolken, Burgäschi u.a.
One supply zone, water supplier: Wasserversorgung Wasseramt AG.
How to read the share of the parametric value
Several samples per year: for chemical parameters the mean value is given, for microbiological ones the highest measured value. There the parametric value is zero — a single finding would disappear in the average, and it is precisely that finding which is the information. Which reference applies is stated in the last column of the table.
Wasserversorgung Wasseramt AG
Wasserversorgung Wasseramt AGAssigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Nitrate | 13.4 mg/l | 40 mg/l | 34 % | Mean · Wasserversorgung Wasseramt AG · Source [1] |
| Escherichia coli (E. coli) | nn not detectable Unit not stated in the document | 0/100 ml | — | Maximum · Median nn · Wasserversorgung Wasseramt AG · Source [1] |
| Sulphate | 10.6 mg/l | — | — | Mean · Wasserversorgung Wasseramt AG · Source [1] |
Show all recorded parameters (23 — most recent value per parameter)
Microbiology (3)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Aerobic mesophilic bacteria | 1 KBE/ml | 300 1/ml | — | Mean · Wasserversorgung Wasseramt AG · Source [1] |
| Escherichia coli (E. coli) | nn not detectable Unit not stated in the document | 0/100 ml | — | Maximum · Median nn · Wasserversorgung Wasseramt AG · Source [1] |
| Intestinal enterococci | nn not detectable Unit not stated in the document | 0/100 ml | — | Maximum · Median nn · Wasserversorgung Wasseramt AG · Source [1] |
Chemical parameters (2)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Fluoride | 0.065 mg/l | 1.5 mg/l | 4 % | Mean · Wasserversorgung Wasseramt AG · Source [1] |
| Nitrate | 13.4 mg/l | 40 mg/l | 34 % | Mean · Wasserversorgung Wasseramt AG · Source [1] |
PFAS (3)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Perfluorohexane sulfonic acid (PFHxS) | < 0.001 µg/l below limit of quantification | 0.3 µg/l | < 0.3 % * | Mean · Wasserversorgung Wasseramt AG · Source [1] |
| Perfluorooctanesulfonic acid (PFOS) | 0.002 µg/l | 0.3 µg/l | 0.7 % | Mean · Wasserversorgung Wasseramt AG · Source [1] |
| Perfluorooctanoic acid (PFOA) | 0.004 µg/l | 0.5 µg/l | 0.8 % | Mean · Wasserversorgung Wasseramt AG · Source [1] |
* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.
Metabolites (2)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Chlorothalonil metabolite R417888 | 0.03 µg/l | 0.1 µg/l | 30 % | Mean · Wasserversorgung Wasseramt AG · Source [1] |
| Chlorothalonil metabolite R471811 | 0.24 µg/l | 0.1 µg/l | 240 % Mean above the parametric value | Mean · Wasserversorgung Wasseramt AG · Source [1] |
Annual means and medians are not individual measured values, but the parametric values apply per sample. If a mean lies above it, at least one individual sample was above it — the mean does not say how many, or by how much. That is why this is not reported here as an exceedance of the parametric value. What counts remains the water supplier's publication, which each row links to.
Indicator parameters (9)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Chloride | 9.91 mg/l | — | — | Mean · Wasserversorgung Wasseramt AG · Source [1] |
| Conductivity (25 °C) | 512 µS/cm | — | — | Mean · Wasserversorgung Wasseramt AG · Source [1] |
| Iron | < 0.005 mg/l below limit of quantification | 0.2 mg/l | < 3 % * | Mean · Wasserversorgung Wasseramt AG · Source [1] |
| Manganese | < 0.005 mg/l below limit of quantification | 50 µg/l | < 10 % * | Mean · Wasserversorgung Wasseramt AG · Source [1] |
| pH | 7.46 | — | — | Mean · Wasserversorgung Wasseramt AG · Source [1] |
| Sulphate | 10.6 mg/l | — | — | Mean · Wasserversorgung Wasseramt AG · Source [1] |
| Temperature | 13.8 °C | — | — | Mean · Wasserversorgung Wasseramt AG · Source [1] |
| Total organic carbon (TOC) | 0.51 mg/l | — | — | Mean · Wasserversorgung Wasseramt AG · Source [2] |
| Turbidity | 0.2 TE/F | — | — | Mean · Wasserversorgung Wasseramt AG · Source [1] |
* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.
Further parameters (4)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Calcium | 85 mg/l | — | — | Mean · Wasserversorgung Wasseramt AG · Source [1] |
| Hydrogen carbonate | 23.7 mg/l | — | — | Mean · Wasserversorgung Wasseramt AG · Source [1] |
| Magnesium | 9.8 mg/l | — | — | Mean · Wasserversorgung Wasseramt AG · Source [1] |
| Total hardness | 25.3 °fH | — | — | Mean · Wasserversorgung Wasseramt AG · Source [1] |
Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.
Postcodes in this zone: 4556
Frequently asked questions about drinking water in Aeschi SO, Bolken, Burgäschi u.a.
- How hard is the water in Aeschi SO, Bolken, Burgäschi u.a.?
- Wasserversorgung Wasseramt AG publishes a total hardness of 25.3 °fH for the supply zone Wasserversorgung Wasseramt AG — that corresponds to 14.2 °dH. The hardness range is a classification under the German Detergents and Cleaning Products Act (soft below 8,4 °dH, medium 8,4 to 14 °dH, hard above that) and not a quality verdict — it indicates how much calcium and magnesium is dissolved in the water. Basis: 2025, retrieved on 07/08/2026.
- How much nitrate is in the drinking water in Aeschi SO, Bolken, Burgäschi u.a.?
- Wasserversorgung Wasseramt AG publishes a nitrate value of 13.4 mg/l for the supply zone Wasserversorgung Wasseramt AG. The statutory parametric value is 40 mg/l; the measured value represents 34 % of the parametric value. Basis: 2025, retrieved on 07/08/2026.
- Who supplies the drinking water in Aeschi SO, Bolken, Burgäschi u.a.?
- Wasserversorgung Wasseramt AG. The values shown here come from the supply zone Wasserversorgung Wasseramt AG and apply to the water the supplier delivers. What happens between the building connection and the tap — in old lead pipes, for example — is not covered by these analyses; information on that is provided by owners, the health authority or an examination by an accredited laboratory.
General questions — how current the data is, limit of quantification, parametric values, who is behind this site — are answered under Questions & answers.