Skip to content
maunawai.info

Drinking water in Adlikon b. Regensdorf

2 supply zones — values can differ depending on the district. Below is the zone with the most documented parameters, the others collapsed underneath. To determine the exact match, look up the postcode.

How to read the share of the parametric value

12 % Share of the parametric value. The proportion of the permitted maximum that the measured value uses — here 12 %, so just over an eighth.
< 10 % * Below the limit of quantification. The substance was not detectable. The mark shows where the detection limit lies relative to the parametric value — the actual share of the parametric value is below that.

Several samples per year: for chemical parameters the mean value is given, for microbiological ones the highest measured value. There the parametric value is zero — a single finding would disappear in the average, and it is precisely that finding which is the information. Which reference applies is stated in the last column of the table.

Regensdorf & Adlikon

Gemeinde Regensdorf

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

These values are more than a year old. The most recent analysis the water supplier has published for this zone dates from 31/12/2024. We have no newer values — which is why we show the latest available ones rather than none at all. They say nothing about how the water has changed since then.

Water hardness
15.3 °dH
Hardness range hard
Key values Regensdorf & Adlikon
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 10.25 mg/l 40 mg/l
26 %
Mean · Regensdorf & Adlikon
Escherichia coli (E. coli) 0 KBE/100ml 0/100 ml Maximum · Median 0 · Regensdorf & Adlikon
Sulphate 15 mg/l Mean · Regensdorf & Adlikon
Sodium 7.7 mg/l 200 mg/l
4 %
Mean · Regensdorf & Adlikon
Show all recorded parameters (16 — most recent value per parameter)

Microbiology (3)

Microbiology – Regensdorf & Adlikon
Parameter Value Parametric value Share of the parametric value Reference
Aerobic mesophilic bacteria 135 KBE/ml 300 1/ml Mean · Regensdorf & Adlikon
Escherichia coli (E. coli) 0 KBE/100ml 0/100 ml Maximum · Median 0 · Regensdorf & Adlikon
Intestinal enterococci 0 KBE/100ml 0/100 ml Maximum · Median 0 · Regensdorf & Adlikon

Chemical parameters (2)

Chemical parameters – Regensdorf & Adlikon
Parameter Value Parametric value Share of the parametric value Reference
Fluoride < 0.1 mg/l
below limit of quantification
1.5 mg/l
< 7 % *
Mean · Regensdorf & Adlikon
Nitrate 10.25 mg/l 40 mg/l
26 %
Mean · Regensdorf & Adlikon

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Metabolites (1)

Metabolites – Regensdorf & Adlikon
Parameter Value Parametric value Share of the parametric value Reference
Chlorothalonil metabolite R471811 0.157 µg/l 0.1 µg/l
157 % Mean above the parametric value
Mean · Regensdorf & Adlikon

Annual means and medians are not individual measured values, but the parametric values apply per sample. If a mean lies above it, at least one individual sample was above it — the mean does not say how many, or by how much. That is why this is not reported here as an exceedance of the parametric value. What counts remains the water supplier's publication, which each row links to.

Indicator parameters (6)

Indicator parameters – Regensdorf & Adlikon
Parameter Value Parametric value Share of the parametric value Reference
Chloride 12.1 mg/l Mean · Regensdorf & Adlikon
Conductivity (25 °C) 544 µS/cm Mean · Regensdorf & Adlikon
pH 7.45 Mean · Regensdorf & Adlikon
Sodium 7.7 mg/l 200 mg/l
4 %
Mean · Regensdorf & Adlikon
Sulphate 15 mg/l Mean · Regensdorf & Adlikon
Temperature 15.05 °C Mean · Regensdorf & Adlikon

Further parameters (4)

Further parameters – Regensdorf & Adlikon
Parameter Value Parametric value Share of the parametric value Reference
Calcium 82.15 mg/l Mean · Regensdorf & Adlikon
Magnesium 18.05 mg/l Mean · Regensdorf & Adlikon
Potassium 1.15 mg/l Mean · Regensdorf & Adlikon
Total hardness 27.4 °fH Mean · Regensdorf & Adlikon

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Postcodes in this zone: 8106

Show 1 more supply zone

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

These values are more than a year old. The most recent analysis the water supplier has published for this zone dates from 31/12/2024. We have no newer values — which is why we show the latest available ones rather than none at all. They say nothing about how the water has changed since then.

Water hardness
12.9 °dH
Hardness range medium
Key values Watt
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 6.45 mg/l 40 mg/l
16 %
Mean · Watt
Escherichia coli (E. coli) 0 KBE/100ml 0/100 ml Maximum · Median 0 · Watt
Sulphate 10.55 mg/l Mean · Watt
Sodium 7.1 mg/l 200 mg/l
4 %
Mean · Watt
Show all recorded parameters (16 — most recent value per parameter)

Microbiology (3)

Microbiology – Watt
Parameter Value Parametric value Share of the parametric value Reference
Aerobic mesophilic bacteria 9.5 KBE/ml 300 1/ml Mean · Watt
Escherichia coli (E. coli) 0 KBE/100ml 0/100 ml Maximum · Median 0 · Watt
Intestinal enterococci 0 KBE/100ml 0/100 ml Maximum · Median 0 · Watt

Chemical parameters (2)

Chemical parameters – Watt
Parameter Value Parametric value Share of the parametric value Reference
Fluoride < 0.1 mg/l
below limit of quantification
1.5 mg/l
< 7 % *
Mean · Watt
Nitrate 6.45 mg/l 40 mg/l
16 %
Mean · Watt

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Metabolites (1)

Metabolites – Watt
Parameter Value Parametric value Share of the parametric value Reference
Chlorothalonil metabolite R471811 0.037 µg/l 0.1 µg/l
37 %
Mean · Watt

Indicator parameters (6)

Indicator parameters – Watt
Parameter Value Parametric value Share of the parametric value Reference
Chloride 8.7 mg/l Mean · Watt
Conductivity (25 °C) 447 µS/cm Mean · Watt
pH 7.65 Mean · Watt
Sodium 7.1 mg/l 200 mg/l
4 %
Mean · Watt
Sulphate 10.55 mg/l Mean · Watt
Temperature 14.35 °C Mean · Watt

Further parameters (4)

Further parameters – Watt
Parameter Value Parametric value Share of the parametric value Reference
Calcium 66.8 mg/l Mean · Watt
Magnesium 15.65 mg/l Mean · Watt
Potassium 1.3 mg/l Mean · Watt
Total hardness 23 °fH Mean · Watt

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Source: https://trinkwasser.ch/de/versorger/985/gemeinde-regensdorf/2412/watt · 2024 · 2024 · retrieved on 07/08/2026

Postcodes in this zone: 8106

Frequently asked questions about drinking water in Adlikon b. Regensdorf

How hard is the water in Adlikon b. Regensdorf?
Gemeinde Regensdorf publishes a total hardness of 27.4 °fH for the supply zone Regensdorf & Adlikon — that corresponds to 15.3 °dH. The hardness range is a classification under the German Detergents and Cleaning Products Act (soft below 8,4 °dH, medium 8,4 to 14 °dH, hard above that) and not a quality verdict — it indicates how much calcium and magnesium is dissolved in the water. Basis: 2024, retrieved on 07/08/2026.
How much nitrate is in the drinking water in Adlikon b. Regensdorf?
Gemeinde Regensdorf publishes a nitrate value of 10.25 mg/l for the supply zone Regensdorf & Adlikon. The statutory parametric value is 40 mg/l; the measured value represents 26 % of the parametric value. Basis: 2024, retrieved on 07/08/2026.
Who supplies the drinking water in Adlikon b. Regensdorf?
Gemeinde Regensdorf. The values shown here come from the supply zone Regensdorf & Adlikon and apply to the water the supplier delivers. What happens between the building connection and the tap — in old lead pipes, for example — is not covered by these analyses; information on that is provided by owners, the health authority or an examination by an accredited laboratory.

General questions — how current the data is, limit of quantification, parametric values, who is behind this site — are answered under Questions & answers.