Drinking water in Adligenswil
One supply zone, water supplier: Genossenschaft Wasserversorgung Adligenswil.
How to read the share of the parametric value
Several samples per year: for chemical parameters the mean value is given, for microbiological ones the highest measured value. There the parametric value is zero — a single finding would disappear in the average, and it is precisely that finding which is the information. Which reference applies is stated in the last column of the table.
Adligenswil
Genossenschaft Wasserversorgung AdligenswilAssigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Nitrate | 4.1 mg/l | 40 mg/l | 10 % | Mean · Adligenswil |
| Escherichia coli (E. coli) | 0 KBE/100ml | 0/100 ml | — | Maximum · Median 0 · Adligenswil |
| Sulphate | 5.5 mg/l | — | — | Mean · Adligenswil |
| Sodium | 1 mg/l | 200 mg/l | 0.5 % | Mean · Adligenswil |
Show all recorded parameters (18 — most recent value per parameter)
Microbiology (3)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Aerobic mesophilic bacteria | 2 KBE/ml | 300 1/ml | — | Mean · Adligenswil |
| Escherichia coli (E. coli) | 0 KBE/100ml | 0/100 ml | — | Maximum · Median 0 · Adligenswil |
| Intestinal enterococci | 0 KBE/100ml | 0/100 ml | — | Maximum · Median 0 · Adligenswil |
Chemical parameters (1)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Nitrate | 4.1 mg/l | 40 mg/l | 10 % | Mean · Adligenswil |
Indicator parameters (8)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Chloride | < 1 mg/l below limit of quantification | — | — | Mean · Adligenswil |
| Conductivity (25 °C) | 268 µS/cm | — | — | Mean · Adligenswil |
| Oxidisability | 1.2 mg KMnO4/l | — | — | Mean · Adligenswil |
| pH | 7.8 | — | — | Mean · Adligenswil |
| Sodium | 1 mg/l | 200 mg/l | 0.5 % | Mean · Adligenswil |
| Sulphate | 5.5 mg/l | — | — | Mean · Adligenswil |
| Temperature | 14.2 °C | — | — | Mean · Adligenswil |
| Turbidity | 0.1 TE/F | — | — | Mean · Adligenswil |
Further parameters (6)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Calcium | 51 mg/l | — | — | Mean · Adligenswil |
| Dissolved organic carbon (DOC) | 0.6 mg/l | — | — | Mean · Adligenswil |
| Hydrogen carbonate | 157 mg/l | — | — | Mean · Adligenswil |
| Magnesium | 2 mg/l | — | — | Mean · Adligenswil |
| Potassium | < 1 mg/l below limit of quantification | — | — | Mean · Adligenswil |
| Total hardness | 13.5 °fH | — | — | Mean · Adligenswil |
Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.
Postcodes in this zone: 6043
Frequently asked questions about drinking water in Adligenswil
- How hard is the water in Adligenswil?
- Genossenschaft Wasserversorgung Adligenswil publishes a total hardness of 13.5 °fH for the supply zone Adligenswil — that corresponds to 7.6 °dH. The hardness range is a classification under the German Detergents and Cleaning Products Act (soft below 8,4 °dH, medium 8,4 to 14 °dH, hard above that) and not a quality verdict — it indicates how much calcium and magnesium is dissolved in the water. Basis: 2025, retrieved on 07/08/2026.
- How much nitrate is in the drinking water in Adligenswil?
- Genossenschaft Wasserversorgung Adligenswil publishes a nitrate value of 4.1 mg/l for the supply zone Adligenswil. The statutory parametric value is 40 mg/l; the measured value represents 10 % of the parametric value. Basis: 2025, retrieved on 07/08/2026.
- Who supplies the drinking water in Adligenswil?
- Genossenschaft Wasserversorgung Adligenswil. The values shown here come from the supply zone Adligenswil and apply to the water the supplier delivers. What happens between the building connection and the tap — in old lead pipes, for example — is not covered by these analyses; information on that is provided by owners, the health authority or an examination by an accredited laboratory.
General questions — how current the data is, limit of quantification, parametric values, who is behind this site — are answered under Questions & answers.