Skip to content
maunawai.info

Drinking water in Aarbergen

6 supply zones — values can differ depending on the district. Below is the zone with the most documented parameters, the others collapsed underneath. To determine the exact match, look up the postcode.

How to read the share of the parametric value

12 % Share of the parametric value. The proportion of the permitted maximum that the measured value uses — here 12 %, so just over an eighth.
< 10 % * Below the limit of quantification. The substance was not detectable. The mark shows where the detection limit lies relative to the parametric value — the actual share of the parametric value is below that.

Several samples per year: for chemical parameters the mean value is given, for microbiological ones the highest measured value. There the parametric value is zero — a single finding would disappear in the average, and it is precisely that finding which is the information. Which reference applies is stated in the last column of the table.

Daisbach

Aarbergen

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

Water hardness
13.1 °dH
Hardness range mittel
Key values Daisbach
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 25,8 mg/l 50 mg/l
52 %
Single value · Daisbach
Sulphate 41 mg/l 250 mg/l
16 %
Single value · Daisbach
Sodium 8,5 mg/l 200 mg/l
4 %
Single value · Daisbach
Show all recorded parameters (15 — most recent value per parameter)

Chemical parameters (4)

Chemical parameters – Daisbach
Parameter Value Parametric value Share of the parametric value Reference
Arsenic < 0,001 mg/l
below limit of quantification
10 µg/l
< 10 % *
Single value · Daisbach
Fluoride < 0,2 mg/l
below limit of quantification
1.5 mg/l
< 13 % *
Single value · Daisbach
Nitrate 25,8 mg/l 50 mg/l
52 %
Single value · Daisbach
Nitrite < 0,02 mg/l
below limit of quantification
0.5 mg/l
< 4 % *
Single value · Daisbach

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Indicator parameters (6)

Indicator parameters – Daisbach
Parameter Value Parametric value Share of the parametric value Reference
Chloride 14,6 mg/l 250 mg/l
6 %
Single value · Daisbach
Iron 0,02 mg/l 0.2 mg/l
10 %
Single value · Daisbach
Manganese < 0,005 mg/l
below limit of quantification
50 µg/l
< 10 % *
Single value · Daisbach
pH 7,51 6,5–9,5 Single value · Daisbach
Sodium 8,5 mg/l 200 mg/l
4 %
Single value · Daisbach
Sulphate 41 mg/l 250 mg/l
16 %
Single value · Daisbach

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Further parameters (5)

Further parameters – Daisbach
Parameter Value Parametric value Share of the parametric value Reference
Calcium 63,9 mg/l Single value · Daisbach
Hardness range (WRMG) mittel Single value · Daisbach
Magnesium 18,1 mg/l Single value · Daisbach
Potassium 1,4 mg/l Single value · Daisbach
Total hardness 13,1 °dH Single value · Daisbach

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Postcodes in this zone: 65326

Show 5 more supply zones

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

Water hardness
18.2 °dH
Hardness range hart
Key values Hausen
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 9,5 mg/l 50 mg/l
19 %
Single value · Hausen
Sulphate 83 mg/l 250 mg/l
33 %
Single value · Hausen
Sodium 9,3 mg/l 200 mg/l
5 %
Single value · Hausen
Show all recorded parameters (15 — most recent value per parameter)

Chemical parameters (4)

Chemical parameters – Hausen
Parameter Value Parametric value Share of the parametric value Reference
Arsenic < 0,001 mg/l
below limit of quantification
10 µg/l
< 10 % *
Single value · Hausen
Fluoride < 0,2 mg/l
below limit of quantification
1.5 mg/l
< 13 % *
Single value · Hausen
Nitrate 9,5 mg/l 50 mg/l
19 %
Single value · Hausen
Nitrite < 0,02 mg/l
below limit of quantification
0.5 mg/l
< 4 % *
Single value · Hausen

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Indicator parameters (6)

Indicator parameters – Hausen
Parameter Value Parametric value Share of the parametric value Reference
Chloride 16,3 mg/l 250 mg/l
7 %
Single value · Hausen
Iron < 0,01 mg/l
below limit of quantification
0.2 mg/l
< 5 % *
Single value · Hausen
Manganese < 0,005 mg/l
below limit of quantification
50 µg/l
< 10 % *
Single value · Hausen
pH 7,58 6,5–9,5 Single value · Hausen
Sodium 9,3 mg/l 200 mg/l
5 %
Single value · Hausen
Sulphate 83 mg/l 250 mg/l
33 %
Single value · Hausen

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Further parameters (5)

Further parameters – Hausen
Parameter Value Parametric value Share of the parametric value Reference
Calcium 88,5 mg/l Single value · Hausen
Hardness range (WRMG) hart Single value · Hausen
Magnesium 25,2 mg/l Single value · Hausen
Potassium 1,9 mg/l Single value · Hausen
Total hardness 18,2 °dH Single value · Hausen

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Postcodes in this zone: 65326

Kettenbach

Aarbergen

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

Water hardness
17.3 °dH
Hardness range hart
Key values Kettenbach
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 7,9 mg/l 50 mg/l
16 %
Single value · Kettenbach
Sulphate 67 mg/l 250 mg/l
27 %
Single value · Kettenbach
Sodium 10,6 mg/l 200 mg/l
5 %
Single value · Kettenbach
Show all recorded parameters (15 — most recent value per parameter)

Chemical parameters (4)

Chemical parameters – Kettenbach
Parameter Value Parametric value Share of the parametric value Reference
Arsenic < 0,001 mg/l
below limit of quantification
10 µg/l
< 10 % *
Single value · Kettenbach
Fluoride < 0,2 mg/l
below limit of quantification
1.5 mg/l
< 13 % *
Single value · Kettenbach
Nitrate 7,9 mg/l 50 mg/l
16 %
Single value · Kettenbach
Nitrite < 0,02 mg/l
below limit of quantification
0.5 mg/l
< 4 % *
Single value · Kettenbach

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Indicator parameters (6)

Indicator parameters – Kettenbach
Parameter Value Parametric value Share of the parametric value Reference
Chloride 18,5 mg/l 250 mg/l
7 %
Single value · Kettenbach
Iron < 0,01 mg/l
below limit of quantification
0.2 mg/l
< 5 % *
Single value · Kettenbach
Manganese < 0,005 mg/l
below limit of quantification
50 µg/l
< 10 % *
Single value · Kettenbach
pH 7,51 6,5–9,5 Single value · Kettenbach
Sodium 10,6 mg/l 200 mg/l
5 %
Single value · Kettenbach
Sulphate 67 mg/l 250 mg/l
27 %
Single value · Kettenbach

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Further parameters (5)

Further parameters – Kettenbach
Parameter Value Parametric value Share of the parametric value Reference
Calcium 86,1 mg/l Single value · Kettenbach
Hardness range (WRMG) hart Single value · Kettenbach
Magnesium 22,7 mg/l Single value · Kettenbach
Potassium 1,6 mg/l Single value · Kettenbach
Total hardness 17,3 °dH Single value · Kettenbach

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Postcodes in this zone: 65326

Michelbach

Aarbergen

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

Water hardness
10.7 °dH
Hardness range mittel
Key values Michelbach
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 8,3 mg/l 50 mg/l
17 %
Single value · Michelbach
Sulphate 47 mg/l 250 mg/l
19 %
Single value · Michelbach
Sodium 9,7 mg/l 200 mg/l
5 %
Single value · Michelbach
Show all recorded parameters (15 — most recent value per parameter)

Chemical parameters (4)

Chemical parameters – Michelbach
Parameter Value Parametric value Share of the parametric value Reference
Arsenic < 0,001 mg/l
below limit of quantification
10 µg/l
< 10 % *
Single value · Michelbach
Fluoride < 0,2 mg/l
below limit of quantification
1.5 mg/l
< 13 % *
Single value · Michelbach
Nitrate 8,3 mg/l 50 mg/l
17 %
Single value · Michelbach
Nitrite < 0,02 mg/l
below limit of quantification
0.5 mg/l
< 4 % *
Single value · Michelbach

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Indicator parameters (6)

Indicator parameters – Michelbach
Parameter Value Parametric value Share of the parametric value Reference
Chloride 13,4 mg/l 250 mg/l
5 %
Single value · Michelbach
Iron < 0,01 mg/l
below limit of quantification
0.2 mg/l
< 5 % *
Single value · Michelbach
Manganese <0,005 mg/l
below limit of quantification
50 µg/l
< 10 % *
Single value · Michelbach
pH 7,19 6,5–9,5 Single value · Michelbach
Sodium 9,7 mg/l 200 mg/l
5 %
Single value · Michelbach
Sulphate 47 mg/l 250 mg/l
19 %
Single value · Michelbach

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Further parameters (5)

Further parameters – Michelbach
Parameter Value Parametric value Share of the parametric value Reference
Calcium 48,5 mg/l Single value · Michelbach
Hardness range (WRMG) mittel Single value · Michelbach
Magnesium 16,9 mg/l Single value · Michelbach
Potassium 1,3 mg/l Single value · Michelbach
Total hardness 10,7 °dH Single value · Michelbach

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Postcodes in this zone: 65326

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

Water hardness
8 °dH
Hardness range weich
Key values Panrod
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 42,2 mg/l 50 mg/l
84 %
Single value · Panrod
Sulphate 31 mg/l 250 mg/l
12 %
Single value · Panrod
Sodium 7,7 mg/l 200 mg/l
4 %
Single value · Panrod
Show all recorded parameters (15 — most recent value per parameter)

Chemical parameters (4)

Chemical parameters – Panrod
Parameter Value Parametric value Share of the parametric value Reference
Arsenic < 0,001 mg/l
below limit of quantification
10 µg/l
< 10 % *
Single value · Panrod
Fluoride < 0,2 mg/l
below limit of quantification
1.5 mg/l
< 13 % *
Single value · Panrod
Nitrate 42,2 mg/l 50 mg/l
84 %
Single value · Panrod
Nitrite < 0,02 mg/l
below limit of quantification
0.5 mg/l
< 4 % *
Single value · Panrod

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Indicator parameters (6)

Indicator parameters – Panrod
Parameter Value Parametric value Share of the parametric value Reference
Chloride 16,5 mg/l 250 mg/l
7 %
Single value · Panrod
Iron < 0,01 mg/l
below limit of quantification
0.2 mg/l
< 5 % *
Single value · Panrod
Manganese < 0,005 mg/l
below limit of quantification
50 µg/l
< 10 % *
Single value · Panrod
pH 7,39 6,5–9,5 Single value · Panrod
Sodium 7,7 mg/l 200 mg/l
4 %
Single value · Panrod
Sulphate 31 mg/l 250 mg/l
12 %
Single value · Panrod

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Further parameters (5)

Further parameters – Panrod
Parameter Value Parametric value Share of the parametric value Reference
Calcium 41,8 mg/l Single value · Panrod
Hardness range (WRMG) weich Single value · Panrod
Magnesium 9,2 mg/l Single value · Panrod
Potassium 1,1 mg/l Single value · Panrod
Total hardness 8 °dH Single value · Panrod

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Postcodes in this zone: 65326

Rückershausen

Aarbergen

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

Water hardness
13.4 °dH
Hardness range mittel
Key values Rückershausen
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 23,4 mg/l 50 mg/l
47 %
Single value · Rückershausen
Sulphate 43 mg/l 250 mg/l
17 %
Single value · Rückershausen
Sodium 12,5 mg/l 200 mg/l
6 %
Single value · Rückershausen
Show all recorded parameters (15 — most recent value per parameter)

Chemical parameters (4)

Chemical parameters – Rückershausen
Parameter Value Parametric value Share of the parametric value Reference
Arsenic < 0,001 mg/l
below limit of quantification
10 µg/l
< 10 % *
Single value · Rückershausen
Fluoride < 0,2 mg/l
below limit of quantification
1.5 mg/l
< 13 % *
Single value · Rückershausen
Nitrate 23,4 mg/l 50 mg/l
47 %
Single value · Rückershausen
Nitrite < 0,02 mg/l
below limit of quantification
0.5 mg/l
< 4 % *
Single value · Rückershausen

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Indicator parameters (6)

Indicator parameters – Rückershausen
Parameter Value Parametric value Share of the parametric value Reference
Chloride 18,8 mg/l 250 mg/l
8 %
Single value · Rückershausen
Iron < 0,01 mg/l
below limit of quantification
0.2 mg/l
< 5 % *
Single value · Rückershausen
Manganese < 0,005 mg/l
below limit of quantification
50 µg/l
< 10 % *
Single value · Rückershausen
pH 7,61 6,5–9,5 Single value · Rückershausen
Sodium 12,5 mg/l 200 mg/l
6 %
Single value · Rückershausen
Sulphate 43 mg/l 250 mg/l
17 %
Single value · Rückershausen

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Further parameters (5)

Further parameters – Rückershausen
Parameter Value Parametric value Share of the parametric value Reference
Calcium 65,8 mg/l Single value · Rückershausen
Hardness range (WRMG) mittel Single value · Rückershausen
Magnesium 18,1 mg/l Single value · Rückershausen
Potassium 2,1 mg/l Single value · Rückershausen
Total hardness 13,4 °dH Single value · Rückershausen

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Postcodes in this zone: 65326

Frequently asked questions about drinking water in Aarbergen

How hard is the water in Aarbergen?
Aarbergen publishes a total hardness of 13.1 °dH for the supply zone Daisbach (hardness range mittel). The hardness range is a classification under the German Detergents and Cleaning Products Act (soft below 8,4 °dH, medium 8,4 to 14 °dH, hard above that) and not a quality verdict — it indicates how much calcium and magnesium is dissolved in the water. Basis: Publication by the water supplier, retrieved on 18/08/2026.
How much nitrate is in the drinking water in Aarbergen?
Aarbergen publishes a nitrate value of 25,8 mg/l for the supply zone Daisbach. The statutory parametric value is 50 mg/l; the measured value represents 52 % of the parametric value. Basis: Publication by the water supplier, retrieved on 18/08/2026.
Who supplies the drinking water in Aarbergen?
Aarbergen. The values shown here come from the supply zone Daisbach and apply to the water the supplier delivers. What happens between the building connection and the tap — in old lead pipes, for example — is not covered by these analyses; information on that is provided by owners, the health authority or an examination by an accredited laboratory.

General questions — how current the data is, limit of quantification, parametric values, who is behind this site — are answered under Questions & answers.