Skip to content
maunawai.info

Drinking water in 99819

For this postcode the responsible water supplier publishes several supply zones. Which of them serves an individual address is not published — below are the values of the zone with the most documented parameters, the remaining 1 underneath.

How to read the share of the parametric value

12 % Share of the parametric value. The proportion of the permitted maximum that the measured value uses — here 12 %, so just over an eighth.
< 10 % * Below the limit of quantification. The substance was not detectable. The mark shows where the detection limit lies relative to the parametric value — the actual share of the parametric value is below that.

Several samples per year: for chemical parameters the mean value is given, for microbiological ones the highest measured value. There the parametric value is zero — a single finding would disappear in the average, and it is precisely that finding which is the information. Which reference applies is stated in the last column of the table.

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

No date is given for these values. The water supplier publishes the analysis without a sampling date and without a report date. When the water was examined is not apparent from the source — we do not add a date and we do not estimate one. What is stated is therefore only when we retrieved the document.

Key values Berteroda
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 16,2 mg/l 50 mg/l
32 %
Mean · Berteroda
Sulphate 176 mg/l 250 mg/l
70 %
Mean · Berteroda
Sodium 15,8 mg/l 200 mg/l
8 %
Mean · Berteroda
Show all recorded parameters (13 — most recent value per parameter)

Chemical parameters (2)

Chemical parameters – Berteroda
Parameter Value Parametric value Share of the parametric value Reference
Fluoride 0,16 mg/l 1.5 mg/l
11 %
Mean · Berteroda
Nitrate 16,2 mg/l 50 mg/l
32 %
Mean · Berteroda

Indicator parameters (6)

Indicator parameters – Berteroda
Parameter Value Parametric value Share of the parametric value Reference
Calcite dissolution capacity -6,5 mg/l 5 mg/l CaCO3 Mean · Berteroda
Chloride 30,4 mg/l 250 mg/l
12 %
Mean · Berteroda
Conductivity (25 °C) 643 µS/cm 2,790 µS/cm Mean · Berteroda
pH 7,66 6,5–9,5 Mean · Berteroda
Sodium 15,8 mg/l 200 mg/l
8 %
Mean · Berteroda
Sulphate 176 mg/l 250 mg/l
70 %
Mean · Berteroda

Further parameters (5)

Further parameters – Berteroda
Parameter Value Parametric value Share of the parametric value Reference
Acid capacity to pH 4.3 2,93 mmol/l Mean · Berteroda
Calcium 110 mg/l Mean · Berteroda
Magnesium 20,6 mg/l Mean · Berteroda
Potassium 2,8 mg/l Mean · Berteroda
Silicate / silicic acid 4,94 mg/l Mean · Berteroda

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Source: https://tavee.de/trinkwasser/wasserwerte/ · retrieved on 11/07/2026
Show 1 more supply zone in this postcode

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

No date is given for these values. The water supplier publishes the analysis without a sampling date and without a report date. When the water was examined is not apparent from the source — we do not add a date and we do not estimate one. What is stated is therefore only when we retrieved the document.

Water hardness
19.4 °dH
Hardness range hard
Key values Heilbad Heiligenstadt
Parameter Value Parametric value Share of the parametric value Reference
Sulphate 72.4 mg/L 250 mg/l
29 %
Single value
Sodium 10.5 mg/L 200 mg/l
5 %
Single value
Show all recorded parameters (9 — most recent value per parameter)

Chemical parameters (1)

Chemical parameters – Heilbad Heiligenstadt
Parameter Value Parametric value Share of the parametric value Reference
Fluoride 0.18 mg/L 1.5 mg/l
12 %
Single value

Indicator parameters (3)

Indicator parameters – Heilbad Heiligenstadt
Parameter Value Parametric value Share of the parametric value Reference
Chloride 21.8 mg/L 250 mg/l
9 %
Single value
Sodium 10.5 mg/L 200 mg/l
5 %
Single value
Sulphate 72.4 mg/L 250 mg/l
29 %
Single value

Further parameters (5)

Further parameters – Heilbad Heiligenstadt
Parameter Value Parametric value Share of the parametric value Reference
Calcium 102.9 mg/L Single value
Carbonate hardness 12.1 °dH Single value
Magnesium 22.2 mg/L Single value
Potassium 1.9 mg/L Single value
Total hardness 19.4 °dH Single value

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Source: heilbad-heiligenstadt-d5645d42.html · retrieved on 25/07/2026

Frequent questions about postcode 99819

How much nitrate is in the drinking water in Postcode 99819?
Trink- und AbwasserVerband Eisenach-Erbstromtal publishes a nitrate value of 16,2 mg/l for the supply zone Berteroda. The statutory parametric value is 50 mg/l; the measured value represents 32 % of the parametric value. Basis: Publication by the water supplier, retrieved on 11/07/2026.
Who supplies the drinking water in Postcode 99819?
Trink- und AbwasserVerband Eisenach-Erbstromtal. The values shown here come from the supply zone Berteroda and apply to the water the supplier delivers. What happens between the building connection and the tap — in old lead pipes, for example — is not covered by these analyses; information on that is provided by owners, the health authority or an examination by an accredited laboratory.

General questions — how current the data is, limit of quantification, parametric values, who is behind this site — are answered under Questions & answers.