Drinking water in 98617
For this postcode Stadtwerke Meiningen GmbH publishes several supply zones. Which of them serves an individual address is not published — below are the values of the zone with the most documented parameters, the remaining 1 underneath.
How to read the share of the parametric value
Several samples per year: for chemical parameters the mean value is given, for microbiological ones the highest measured value. There the parametric value is zero — a single finding would disappear in the average, and it is precisely that finding which is the information. Which reference applies is stated in the last column of the table.
Meiningen
Stadtwerke Meiningen GmbHAssigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Escherichia coli (E. coli) | 0 KBE/100 ml | 0/100 ml | — | Single value |
Show all recorded parameters (10 — most recent value per parameter)
Microbiology (2)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Escherichia coli (E. coli) | 0 KBE/100 ml | 0/100 ml | — | Single value |
| Intestinal enterococci | 0 KBE/100 ml | 0/100 ml | — | Single value |
Indicator parameters (7)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Clostridium perfringens (including spores) | 0 KBE/100 ml | 0/100 ml | — | Single value |
| Coliform bacteria | 0 KBE/100 ml | 0/100 ml | — | Single value |
| Colour | <0,1 1/m below limit of quantification | 0.5 m⁻¹ | — | Single value |
| Odour | o.B. | für den Verbraucher annehmbar | — | Single value |
| pH | 8,0 | 6,5–9,5 | — | Single value |
| Taste | o.B. | für den Verbraucher annehmbar | — | Single value |
| Turbidity | <0,10 NTU below limit of quantification | 1 NTU | — | Single value |
Treatment substances (1)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Free chlorine | <0,04 mg/l below limit of quantification | — | — | Single value |
Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.
Show 1 more supply zone in this postcode
Dreißigacker, Wasserturm (Reinwasser, Abg.)
Stadtwerke Meiningen GmbHAssigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Sum of PFAS | 0 mg/l | 0.1 µg/l | 0 % | Single value |
| Nitrate | 5,3 mg/l | 50 mg/l | 11 % | Single value |
| Lead | <0,001 mg/l below limit of quantification | 10 µg/l | < 10 % * | Single value |
| Sulphate | 6,4 mg/l | 250 mg/l | 3 % | Single value |
| Sodium | 6,3 mg/l | 200 mg/l | 3 % | Single value |
* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.
Show all recorded parameters (82 — most recent value per parameter)
Chemical parameters (49)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| 1,2-dichloroethane | <0,0005 mg/l below limit of quantification | 3 µg/l | < 17 % * | Single value |
| Antimony | <0,001 mg/l below limit of quantification | 5 µg/l | < 20 % * | Single value |
| Arsenic | 0,001 mg/l | 10 µg/l | 10 % | Single value |
| Atrazine | <0,000030 mg/l below limit of quantification | — | — | Single value |
| Benzene | <0,0003 mg/l below limit of quantification | 1 µg/l | < 30 % * | Single value |
| Benzo(a)pyrene | <0,000003 mg/l below limit of quantification | 10 ng/l | < 30 % * | Single value |
| Benzo(b)fluoranthene | <0,000003 mg/l below limit of quantification | — | — | Single value |
| Benzo(ghi)perylene | <0,000003 mg/l below limit of quantification | — | — | Single value |
| Benzo(k)fluoranthene | <0,000003 mg/l below limit of quantification | — | — | Single value |
| Bisphenol A | <0,0005 mg/l below limit of quantification | 2.5 µg/l | < 20 % * | Single value |
| Boron | <0,01 mg/l below limit of quantification | 1 mg/l | < 1 % * | Single value |
| Bromate | <0,0025 mg/l below limit of quantification | 10 µg/l | < 25 % * | Single value |
| Cadmium | <0,0004 mg/l below limit of quantification | 3 µg/l | < 13 % * | Single value |
| Chlorate | <0,020 mg/l below limit of quantification | 70 µg/l | < 29 % * | Single value |
| Chlorite | <0,060 mg/l below limit of quantification | 0.2 mg/l | < 30 % * | Single value |
| Chlorotoluron | <0,000030 mg/l below limit of quantification | — | — | Single value |
| Chromium | <0,001 mg/l below limit of quantification | 25 µg/l | < 4 % * | Single value |
| Copper | <0,01 mg/l below limit of quantification | 2 mg/l | < 0.5 % * | Single value |
| Cyanazine | <0,000030 mg/l below limit of quantification | — | — | Single value |
| Cyanide | <0,01 mg/l below limit of quantification | 50 µg/l | < 20 % * | Single value |
| Dibromoacetic acid | <0,0030 mg/l below limit of quantification | — | — | Single value |
| Dichloroacetic acid | <0,0030 mg/l below limit of quantification | — | — | Single value |
| Diuron | <0,000030 mg/l below limit of quantification | — | — | Single value |
| Fluoride | 0,19 mg/l | 1.5 mg/l | 13 % | Single value |
| Hexazinone | <0,000030 mg/l below limit of quantification | — | — | Single value |
| Indeno(1,2,3-cd)pyrene | <0,000003 mg/l below limit of quantification | — | — | Single value |
| Isoproturon | <0,000030 mg/l below limit of quantification | — | — | Single value |
| Lead | <0,001 mg/l below limit of quantification | 10 µg/l | < 10 % * | Single value |
| Mercury | <0,0001 mg/l below limit of quantification | 1 µg/l | < 10 % * | Single value |
| Metazachlor | <0,000030 mg/l below limit of quantification | — | — | Single value |
| Methabenzthiazuron | <0,000030 mg/l below limit of quantification | — | — | Single value |
| Metobromuron | <0,000030 mg/l below limit of quantification | — | — | Single value |
| Metolachlor | <0,000030 mg/l below limit of quantification | — | — | Single value |
| Metoxuron | <0,000030 mg/l below limit of quantification | — | — | Single value |
| Monobromoacetic acid | <0,0030 mg/l below limit of quantification | — | — | Single value |
| Monochloroacetic acid | <0,0030 mg/l below limit of quantification | — | — | Single value |
| Nickel | <0,001 mg/l below limit of quantification | 20 µg/l | < 5 % * | Single value |
| Nitrate | 5,3 mg/l | 50 mg/l | 11 % | Single value |
| Nitrite | <0,01 mg/l below limit of quantification | 0.5 mg/l | < 2 % * | Single value |
| Sebuthylazine | <0,000030 mg/l below limit of quantification | — | — | Single value |
| Selenium | 0,002 mg/l | 10 µg/l | 20 % | Single value |
| Simazine | <0,000030 mg/l below limit of quantification | — | — | Single value |
| Terbuthylazine | <0,000030 mg/l below limit of quantification | — | — | Single value |
| Tetrachloroethene | <0,0005 mg/l below limit of quantification | — | — | Single value |
| Tribromomethane (bromoform) | <0,0005 mg/l below limit of quantification | — | — | Single value |
| Trichloroacetic acid | <0,0030 mg/l below limit of quantification | — | — | Single value |
| Trichloroethene | <0,0005 mg/l below limit of quantification | — | — | Single value |
| Trichloromethane (chloroform) | 0,0006 mg/l | — | — | Single value |
| Uranium | 0 mg/l | 10 µg/l | 0 % | Single value |
* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.
PFAS (20)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Perfluorobutane sulfonic acid (PFBS) | <0,0000015 mg/l below limit of quantification | — | — | Single value |
| Perfluorobutanoic acid (PFBA) | <0,0000015 mg/l below limit of quantification | — | — | Single value |
| Perfluorodecane sulfonic acid (PFDS) | <0,0000015 mg/l below limit of quantification | — | — | Single value |
| Perfluorodecanoic acid (PFDA) | <0,0000015 mg/l below limit of quantification | — | — | Single value |
| Perfluorododecane sulfonic acid (PFDoDS) | <0,0000015 mg/l below limit of quantification | — | — | Single value |
| Perfluorododecanoic acid (PFDoDA) | <0,0000015 mg/l below limit of quantification | — | — | Single value |
| Perfluoroheptane sulfonic acid (PFHpS) | <0,0000015 mg/l below limit of quantification | — | — | Single value |
| Perfluoroheptanoic acid (PFHpA) | <0,0000015 mg/l below limit of quantification | — | — | Single value |
| Perfluorohexane sulfonic acid (PFHxS) | <0,0000015 mg/l below limit of quantification | — | — | Single value |
| Perfluorohexanoic acid (PFHxA) | <0,0000015 mg/l below limit of quantification | — | — | Single value |
| Perfluorononane sulfonic acid (PFNS) | <0,0000015 mg/l below limit of quantification | — | — | Single value |
| Perfluorononanoic acid (PFNA) | <0,0000015 mg/l below limit of quantification | — | — | Single value |
| Perfluorooctanesulfonic acid (PFOS) | <0,0000015 mg/l below limit of quantification | — | — | Single value |
| Perfluoropentanesulfonic acid (PFPeS) | <0,0000015 mg/l below limit of quantification | — | — | Single value |
| Perfluoropentanoic acid (PFPeA) | <0,0000015 mg/l below limit of quantification | — | — | Single value |
| Perfluorotridecanesulfonic acid (PFTrDS) | <0,0000015 mg/l below limit of quantification | — | — | Single value |
| Perfluorotridecanoic acid (PFTrDA) | <0,0000015 mg/l below limit of quantification | — | — | Single value |
| Perfluoroundecanesulfonic acid (PFUnDS) | <0,0000015 mg/l below limit of quantification | — | — | Single value |
| Perfluoroundecanoic acid (PFUnDA) | <0,0000015 mg/l below limit of quantification | — | — | Single value |
| Sum of PFAS | 0 mg/l | 0.1 µg/l | 0 % | Single value |
Indicator parameters (8)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Aluminium | 0,03 mg/l | 0.2 mg/l | 15 % | Single value |
| Ammonium | <0,02 mg/l below limit of quantification | 0.5 mg/l | < 4 % * | Single value |
| Chloride | 11 mg/l | 250 mg/l | 4 % | Single value |
| Iron | <0,01 mg/l below limit of quantification | 0.2 mg/l | < 5 % * | Single value |
| Manganese | <0,005 mg/l below limit of quantification | 50 µg/l | < 10 % * | Single value |
| pH | 8,8 | 6,5–9,5 | — | Single value |
| Sodium | 6,3 mg/l | 200 mg/l | 3 % | Single value |
| Sulphate | 6,4 mg/l | 250 mg/l | 3 % | Single value |
* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.
Treatment substances (1)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Free chlorine | <0,04 mg/l below limit of quantification | — | — | Single value |
Further parameters (4)
| Parameter | Value | Parametric value | Share of the parametric value | Reference |
|---|---|---|---|---|
| Calcium | 26,6 mg/l | — | — | Single value |
| Magnesium | 1,4 mg/l | — | — | Single value |
| Potassium | 0,9 mg/l | — | — | Single value |
| Total hardness | 4,0 dH | — | — | Single value |
Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.
Frequent questions about postcode 98617
- Who supplies the drinking water in Postcode 98617?
- Stadtwerke Meiningen GmbH. The values shown here come from the supply zone Meiningen and apply to the water the supplier delivers. What happens between the building connection and the tap — in old lead pipes, for example — is not covered by these analyses; information on that is provided by owners, the health authority or an examination by an accredited laboratory.
General questions — how current the data is, limit of quantification, parametric values, who is behind this site — are answered under Questions & answers.