Skip to content
maunawai.info

Drinking water in 97616

For this postcode Bad Neustadt an der Saale publishes several supply zones. Which of them serves an individual address is not published — below are the values of the zone with the most documented parameters, the remaining 5 underneath.

How to read the share of the parametric value

12 % Share of the parametric value. The proportion of the permitted maximum that the measured value uses — here 12 %, so just over an eighth.
< 10 % * Below the limit of quantification. The substance was not detectable. The mark shows where the detection limit lies relative to the parametric value — the actual share of the parametric value is below that.

Several samples per year: for chemical parameters the mean value is given, for microbiological ones the highest measured value. There the parametric value is zero — a single finding would disappear in the average, and it is precisely that finding which is the information. Which reference applies is stated in the last column of the table.

Altstadt, Gartenstadt, östliche und westliche Außenstadt, Stadtteile Mühlbach, Bad Neuhaus und Gemeinde Salz

Bad Neustadt an der Saale

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

These values are more than a year old. The most recent analysis the water supplier has published for this zone dates from 30/07/2025. We have no newer values — which is why we show the latest available ones rather than none at all. They say nothing about how the water has changed since then.

Water hardness
19.6 °dH
Hardness range 3
Key values Altstadt, Gartenstadt, östliche und westliche Außenstadt, Stadtteile Mühlbach, Bad Neuhaus und Gemeinde Salz
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 36,1 mg/l 50 mg/l
72 %
Single value · Altstadt, Gartenstadt, östliche und westliche Außenstadt, Stadtteile Mühlbach, Bad Neuhaus und Gemeinde Salz
Show all recorded parameters (6 — most recent value per parameter)

Chemical parameters (3)

Chemical parameters – Altstadt, Gartenstadt, östliche und westliche Außenstadt, Stadtteile Mühlbach, Bad Neuhaus und Gemeinde Salz
Parameter Value Parametric value Share of the parametric value Reference
Fluoride 0,17 mg/l 1.5 mg/l
11 %
Single value · Altstadt, Gartenstadt, östliche und westliche Außenstadt, Stadtteile Mühlbach, Bad Neuhaus und Gemeinde Salz
Nitrate 36,1 mg/l 50 mg/l
72 %
Single value · Altstadt, Gartenstadt, östliche und westliche Außenstadt, Stadtteile Mühlbach, Bad Neuhaus und Gemeinde Salz
Nitrite <0,01 mg/l
below limit of quantification
0.5 mg/l
< 2 % *
Single value · Altstadt, Gartenstadt, östliche und westliche Außenstadt, Stadtteile Mühlbach, Bad Neuhaus und Gemeinde Salz

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Indicator parameters (1)

Indicator parameters – Altstadt, Gartenstadt, östliche und westliche Außenstadt, Stadtteile Mühlbach, Bad Neuhaus und Gemeinde Salz
Parameter Value Parametric value Share of the parametric value Reference
pH 7,18 - 6,5–9,5 Single value · Altstadt, Gartenstadt, östliche und westliche Außenstadt, Stadtteile Mühlbach, Bad Neuhaus und Gemeinde Salz

Further parameters (2)

Further parameters – Altstadt, Gartenstadt, östliche und westliche Außenstadt, Stadtteile Mühlbach, Bad Neuhaus und Gemeinde Salz
Parameter Value Parametric value Share of the parametric value Reference
Hardness range (WRMG) 3 - Single value · Altstadt, Gartenstadt, östliche und westliche Außenstadt, Stadtteile Mühlbach, Bad Neuhaus und Gemeinde Salz
Total hardness 19,6 °dH Single value · Altstadt, Gartenstadt, östliche und westliche Außenstadt, Stadtteile Mühlbach, Bad Neuhaus und Gemeinde Salz

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Show 5 more supply zones in this postcode

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

These values are more than a year old. The most recent analysis the water supplier has published for this zone dates from 30/07/2025. We have no newer values — which is why we show the latest available ones rather than none at all. They say nothing about how the water has changed since then.

Water hardness
14.1 °dH
Hardness range 3
Key values Brendlorenzen
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 16,3 mg/l 50 mg/l
33 %
Single value · Brendlorenzen
Show all recorded parameters (6 — most recent value per parameter)

Chemical parameters (3)

Chemical parameters – Brendlorenzen
Parameter Value Parametric value Share of the parametric value Reference
Fluoride 0,25 mg/l 1.5 mg/l
17 %
Single value · Brendlorenzen
Nitrate 16,3 mg/l 50 mg/l
33 %
Single value · Brendlorenzen
Nitrite <0,01 mg/l
below limit of quantification
0.5 mg/l
< 2 % *
Single value · Brendlorenzen

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Indicator parameters (1)

Indicator parameters – Brendlorenzen
Parameter Value Parametric value Share of the parametric value Reference
pH 7,59 - 6,5–9,5 Single value · Brendlorenzen

Further parameters (2)

Further parameters – Brendlorenzen
Parameter Value Parametric value Share of the parametric value Reference
Hardness range (WRMG) 3 - Single value · Brendlorenzen
Total hardness 14,1 °dH Single value · Brendlorenzen

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

These values are more than a year old. The most recent analysis the water supplier has published for this zone dates from 30/07/2025. We have no newer values — which is why we show the latest available ones rather than none at all. They say nothing about how the water has changed since then.

Water hardness
18.9 °dH
Hardness range 3
Key values Dürrnhof
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 36,8 mg/l 50 mg/l
74 %
Single value · Dürrnhof
Show all recorded parameters (6 — most recent value per parameter)

Chemical parameters (3)

Chemical parameters – Dürrnhof
Parameter Value Parametric value Share of the parametric value Reference
Fluoride 0,17 mg/l 1.5 mg/l
11 %
Single value · Dürrnhof
Nitrate 36,8 mg/l 50 mg/l
74 %
Single value · Dürrnhof
Nitrite <0,01 mg/l
below limit of quantification
0.5 mg/l
< 2 % *
Single value · Dürrnhof

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Indicator parameters (1)

Indicator parameters – Dürrnhof
Parameter Value Parametric value Share of the parametric value Reference
pH 7,28 - 6,5–9,5 Single value · Dürrnhof

Further parameters (2)

Further parameters – Dürrnhof
Parameter Value Parametric value Share of the parametric value Reference
Hardness range (WRMG) 3 - Single value · Dürrnhof
Total hardness 18,9 °dH Single value · Dürrnhof

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

These values are more than a year old. The most recent analysis the water supplier has published for this zone dates from 30/07/2025. We have no newer values — which is why we show the latest available ones rather than none at all. They say nothing about how the water has changed since then.

Water hardness
18.5 °dH
Hardness range 3
Key values Herschfeld
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 32,2 mg/l 50 mg/l
64 %
Single value · Herschfeld
Show all recorded parameters (6 — most recent value per parameter)

Chemical parameters (3)

Chemical parameters – Herschfeld
Parameter Value Parametric value Share of the parametric value Reference
Fluoride 0,15 mg/l 1.5 mg/l
10 %
Single value · Herschfeld
Nitrate 32,2 mg/l 50 mg/l
64 %
Single value · Herschfeld
Nitrite <0,01 mg/l
below limit of quantification
0.5 mg/l
< 2 % *
Single value · Herschfeld

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Indicator parameters (1)

Indicator parameters – Herschfeld
Parameter Value Parametric value Share of the parametric value Reference
pH 7,35 - 6,5–9,5 Single value · Herschfeld

Further parameters (2)

Further parameters – Herschfeld
Parameter Value Parametric value Share of the parametric value Reference
Hardness range (WRMG) 3 - Single value · Herschfeld
Total hardness 18,5 °dH Single value · Herschfeld

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

These values are more than a year old. The most recent analysis the water supplier has published for this zone dates from 30/07/2025. We have no newer values — which is why we show the latest available ones rather than none at all. They say nothing about how the water has changed since then.

Water hardness
7.8 °dH
Hardness range 1
Key values Lebenhan
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 2,6 mg/l 50 mg/l
5 %
Single value · Lebenhan
Show all recorded parameters (6 — most recent value per parameter)

Chemical parameters (3)

Chemical parameters – Lebenhan
Parameter Value Parametric value Share of the parametric value Reference
Fluoride 0,18 mg/l 1.5 mg/l
12 %
Single value · Lebenhan
Nitrate 2,6 mg/l 50 mg/l
5 %
Single value · Lebenhan
Nitrite <0,01 mg/l
below limit of quantification
0.5 mg/l
< 2 % *
Single value · Lebenhan

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Indicator parameters (1)

Indicator parameters – Lebenhan
Parameter Value Parametric value Share of the parametric value Reference
pH 7,65 - 6,5–9,5 Single value · Lebenhan

Further parameters (2)

Further parameters – Lebenhan
Parameter Value Parametric value Share of the parametric value Reference
Hardness range (WRMG) 1 - Single value · Lebenhan
Total hardness 7,8 °dH Single value · Lebenhan

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

These values are more than a year old. The most recent analysis the water supplier has published for this zone dates from 30/07/2025. We have no newer values — which is why we show the latest available ones rather than none at all. They say nothing about how the water has changed since then.

Water hardness
19 °dH
Hardness range 3
Key values Löhrieth
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 36,2 mg/l 50 mg/l
72 %
Single value · Löhrieth
Show all recorded parameters (6 — most recent value per parameter)

Chemical parameters (3)

Chemical parameters – Löhrieth
Parameter Value Parametric value Share of the parametric value Reference
Fluoride 0,17 mg/l 1.5 mg/l
11 %
Single value · Löhrieth
Nitrate 36,2 mg/l 50 mg/l
72 %
Single value · Löhrieth
Nitrite <0,01 mg/l
below limit of quantification
0.5 mg/l
< 2 % *
Single value · Löhrieth

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Indicator parameters (1)

Indicator parameters – Löhrieth
Parameter Value Parametric value Share of the parametric value Reference
pH 7,43 - 6,5–9,5 Single value · Löhrieth

Further parameters (2)

Further parameters – Löhrieth
Parameter Value Parametric value Share of the parametric value Reference
Hardness range (WRMG) 3 - Single value · Löhrieth
Total hardness 19 °dH Single value · Löhrieth

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Frequent questions about postcode 97616

How hard is the water in Postcode 97616?
Bad Neustadt an der Saale publishes a total hardness of 19.6 °dH for the supply zone Altstadt, Gartenstadt, östliche und westliche Außenstadt, Stadtteile Mühlbach, Bad Neuhaus und Gemeinde Salz (hardness range 3). The hardness range is a classification under the German Detergents and Cleaning Products Act (soft below 8,4 °dH, medium 8,4 to 14 °dH, hard above that) and not a quality verdict — it indicates how much calcium and magnesium is dissolved in the water. Basis: 30.07.2025, retrieved on 11/07/2026.
How much nitrate is in the drinking water in Postcode 97616?
Bad Neustadt an der Saale publishes a nitrate value of 36,1 mg/l for the supply zone Altstadt, Gartenstadt, östliche und westliche Außenstadt, Stadtteile Mühlbach, Bad Neuhaus und Gemeinde Salz. The statutory parametric value is 50 mg/l; the measured value represents 72 % of the parametric value. Basis: 30.07.2025, retrieved on 11/07/2026.
Who supplies the drinking water in Postcode 97616?
Bad Neustadt an der Saale. The values shown here come from the supply zone Altstadt, Gartenstadt, östliche und westliche Außenstadt, Stadtteile Mühlbach, Bad Neuhaus und Gemeinde Salz and apply to the water the supplier delivers. What happens between the building connection and the tap — in old lead pipes, for example — is not covered by these analyses; information on that is provided by owners, the health authority or an examination by an accredited laboratory.

General questions — how current the data is, limit of quantification, parametric values, who is behind this site — are answered under Questions & answers.