Skip to content
maunawai.info

Drinking water in 97437

One supply zone, water supplier: Stadtwerk Haßfurt GmbH.

How to read the share of the parametric value

12 % Share of the parametric value. The proportion of the permitted maximum that the measured value uses — here 12 %, so just over an eighth.
< 10 % * Below the limit of quantification. The substance was not detectable. The mark shows where the detection limit lies relative to the parametric value — the actual share of the parametric value is below that.

Several samples per year: for chemical parameters the mean value is given, for microbiological ones the highest measured value. There the parametric value is zero — a single finding would disappear in the average, and it is precisely that finding which is the information. Which reference applies is stated in the last column of the table.

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

These values are more than a year old. The most recent analysis the water supplier has published for this zone dates from 11/07/2025. We have no newer values — which is why we show the latest available ones rather than none at all. They say nothing about how the water has changed since then.

Water hardness
16 °dH
Hardness range hart
Key values hassfurt gesamt
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 8 mg/l 50 mg/l
16 %
Single value
Sulphate 130 mg/l 250 mg/l
52 %
Single value
Sodium 26 mg/l 200 mg/l
13 %
Single value
Show all recorded parameters (14 — most recent value per parameter)

Chemical parameters (4)

Chemical parameters – hassfurt gesamt
Parameter Value Parametric value Share of the parametric value Reference
Fluoride 0,15 mg/l 1.5 mg/l
10 %
Single value
Mercury < kleiner 0,0001 mg/l
below limit of quantification
1 µg/l Single value
Nitrate 8 mg/l 50 mg/l
16 %
Single value
Nitrite < kleiner 0,030 mg/l
below limit of quantification
0.5 mg/l Single value

Indicator parameters (4)

Indicator parameters – hassfurt gesamt
Parameter Value Parametric value Share of the parametric value Reference
Chloride 33 mg/l 250 mg/l
13 %
Single value
pH 7,76 6,5–9,5 Single value
Sodium 26 mg/l 200 mg/l
13 %
Single value
Sulphate 130 mg/l 250 mg/l
52 %
Single value

Further parameters (6)

Further parameters – hassfurt gesamt
Parameter Value Parametric value Share of the parametric value Reference
Calcium 80 mg/l Single value
Hardness range (WRMG) hart Single value
Magnesium 20 mg/l Single value
Oxygen 7,4 mg/l Single value
Potassium 4,8 mg/l Single value
Total hardness 16 °dH Single value

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Source: https://www.stwhas.de/wasser/wasserqualitaet/ · 11.07.2025 · retrieved on 11/07/2026

Frequent questions about postcode 97437

How hard is the water in Postcode 97437?
Stadtwerk Haßfurt GmbH publishes a total hardness of 16 °dH for the supply zone hassfurt gesamt (hardness range hart). The hardness range is a classification under the German Detergents and Cleaning Products Act (soft below 8,4 °dH, medium 8,4 to 14 °dH, hard above that) and not a quality verdict — it indicates how much calcium and magnesium is dissolved in the water. Basis: 11.07.2025, retrieved on 11/07/2026.
How much nitrate is in the drinking water in Postcode 97437?
Stadtwerk Haßfurt GmbH publishes a nitrate value of 8 mg/l for the supply zone hassfurt gesamt. The statutory parametric value is 50 mg/l; the measured value represents 16 % of the parametric value. Basis: 11.07.2025, retrieved on 11/07/2026.
Who supplies the drinking water in Postcode 97437?
Stadtwerk Haßfurt GmbH. The values shown here come from the supply zone hassfurt gesamt and apply to the water the supplier delivers. What happens between the building connection and the tap — in old lead pipes, for example — is not covered by these analyses; information on that is provided by owners, the health authority or an examination by an accredited laboratory.

General questions — how current the data is, limit of quantification, parametric values, who is behind this site — are answered under Questions & answers.