Skip to content
maunawai.info

Drinking water in 97422

For this postcode the responsible water supplier publishes several supply zones. Which of them serves an individual address is not published — below are the values of the zone with the most documented parameters, the remaining 4 underneath.

How to read the share of the parametric value

12 % Share of the parametric value. The proportion of the permitted maximum that the measured value uses — here 12 %, so just over an eighth.
< 10 % * Below the limit of quantification. The substance was not detectable. The mark shows where the detection limit lies relative to the parametric value — the actual share of the parametric value is below that.

Several samples per year: for chemical parameters the mean value is given, for microbiological ones the highest measured value. There the parametric value is zero — a single finding would disappear in the average, and it is precisely that finding which is the information. Which reference applies is stated in the last column of the table.

Fassungsgebiet Wehranlagen Schweinfurt

Stadtwerke Schweinfurt

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

Water hardness
21.4 °dH
Hardness range 3
Key values Fassungsgebiet Wehranlagen Schweinfurt
Parameter Value Parametric value Share of the parametric value Reference
Sum of PFAS 0,000001 mg/l Single value
Nitrate 17,3 mg/l 50 mg/l
35 %
Maximum
Lead < 0,002 mg/l
below limit of quantification
10 µg/l
< 20 % *
Single value
Escherichia coli (E. coli) 0 in 100 ml 0/100 ml Single value
Sulphate 151 mg/l 250 mg/l
60 %
Maximum
Sodium 28,0 mg/l 200 mg/l
14 %
Maximum

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Show all recorded parameters (59 — most recent value per parameter)

Microbiology (2)

Microbiology – Fassungsgebiet Wehranlagen Schweinfurt
Parameter Value Parametric value Share of the parametric value Reference
Escherichia coli (E. coli) 0 in 100 ml 0/100 ml Single value
Intestinal enterococci 0 in 100 ml 0/100 ml Single value

Chemical parameters (27)

Chemical parameters – Fassungsgebiet Wehranlagen Schweinfurt
Parameter Value Parametric value Share of the parametric value Reference
1,2-dichloroethane < 0,0003 mg/l
below limit of quantification
3 µg/l
< 10 % *
Single value
Antimony < 0,0015 mg/l
below limit of quantification
5 µg/l
< 30 % *
Single value
Arsenic < 0,002 mg/l
below limit of quantification
10 µg/l
< 20 % *
Single value
Benzene < 0,0002 mg/l
below limit of quantification
1 µg/l
< 20 % *
Single value
Bisphenol A < 0,000005 mg/l
below limit of quantification
2.5 µg/l
< 0.2 % *
Single value
Boron < 0,1 mg/l
below limit of quantification
1 mg/l
< 10 % *
Single value
Bromate < 0,001 mg/l
below limit of quantification
10 µg/l
< 10 % *
Single value
Cadmium < 0,0003 mg/l
below limit of quantification
3 µg/l
< 10 % *
Single value
Chlorate 0,02 mg/l 70 µg/l
29 %
Single value
Chlorite < 0,01 mg/l
below limit of quantification
0.2 mg/l
< 5 % *
Single value
Chromium < 0,00050 mg/l
below limit of quantification
25 µg/l
< 2 % *
Single value
Copper < 0,02 mg/l
below limit of quantification
2 mg/l
< 1 % *
Single value
Cyanide < 0,005 mg/l
below limit of quantification
50 µg/l
< 10 % *
Single value
Epichlorohydrin < 0,00009 mg/l
below limit of quantification
0.1 µg/l
< 90 % *
Single value
Fluoride 0,33 mg/l 1.5 mg/l
22 %
Maximum
Haloacetic acids (HAA) < 0,001 mg/l
below limit of quantification
Single value
Lead < 0,002 mg/l
below limit of quantification
10 µg/l
< 20 % *
Single value
Mercury < 0,0001 mg/l
below limit of quantification
1 µg/l
< 10 % *
Single value
Nickel < 0,002 mg/l
below limit of quantification
20 µg/l
< 10 % *
Single value
Nitrate 17,3 mg/l 50 mg/l
35 %
Maximum
Nitrite < 0,04 mg/l
below limit of quantification
0.5 mg/l
< 8 % *
Single value
Pesticides < 0,00002 / < 0,00005 mg/l
below limit of quantification
0.1 µg/l Single value
Pesticides — Total < 0,00005 mg/l
below limit of quantification
0.5 µg/l
< 10 % *
Single value
Selenium < 0,002 mg/l
below limit of quantification
10 µg/l
< 20 % *
Single value
Trihalomethanes — Total 0,0005 mg/l 50 µg/l
1 %
Single value
Uranium 0,001 mg/l 10 µg/l
10 %
Single value
Vinyl chloride < 0,0002 mg/l
below limit of quantification
0.5 µg/l
< 40 % *
Single value

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

PFAS (2)

PFAS – Fassungsgebiet Wehranlagen Schweinfurt
Parameter Value Parametric value Share of the parametric value Reference
Sum of 4 PFAS 0,000001 mg/l Single value
Sum of PFAS 0,000001 mg/l Single value

Indicator parameters (19)

Indicator parameters – Fassungsgebiet Wehranlagen Schweinfurt
Parameter Value Parametric value Share of the parametric value Reference
Aluminium < 0,02 mg/l
below limit of quantification
0.2 mg/l
< 10 % *
Single value
Ammonium < 0,05 mg/l
below limit of quantification
0.5 mg/l
< 10 % *
Single value
Calcite dissolution capacity -32 mg/l CaCO3 5 mg/l CaCO3 Maximum
Chloride 45,4 mg/l 250 mg/l
18 %
Maximum
Clostridium perfringens (including spores) 0 in 100 ml 0/100 ml Single value
Coliform bacteria 0 in 100 ml 0/100 ml Single value
Colony count 22 °C 1 Anzahl/ml ohne anormale Veränderung Maximum
Colony count 36 °C 5 Anzahl/ml ohne anormale Veränderung Maximum
Colour 0,09 m-1 0.5 m⁻¹ Maximum
Conductivity (25 °C) 856 µS/cm 2,790 µS/cm Maximum
Iron < 0,02 mg/l
below limit of quantification
0.2 mg/l
< 10 % *
Single value
Manganese < 0,005 mg/l
below limit of quantification
50 µg/l
< 10 % *
Single value
Odour ohne qualitativ für den Verbraucher annehmbar Single value
pH 7,82 6,5–9,5 Maximum
Sodium 28,0 mg/l 200 mg/l
14 %
Maximum
Sulphate 151 mg/l 250 mg/l
60 %
Maximum
Taste ohne qualitativ für den Verbraucher annehmbar Single value
Total organic carbon (TOC) 3,80 mg/l ohne anormale Veränderung Maximum
Turbidity < 0,1 FNU
below limit of quantification
1 NTU Single value

* Value below the limit of quantification: the actual share of the parametric value is not known; it lies somewhere below the stated upper bound. The marker shows where the limit of quantification of the measurement lies relative to the parametric value.

Further parameters (9)

Further parameters – Fassungsgebiet Wehranlagen Schweinfurt
Parameter Value Parametric value Share of the parametric value Reference
Calcium 2,84 mmol/l Maximum
Carbonate hardness 13,4 °dH Maximum
Hardness range (WRMG) 3 Single value
Magnesium 1,07 mmol/l Maximum
Oxygen 10,85 mg/l Maximum
Potassium 0,14 mmol/l Maximum
Silicate / silicic acid 9,4 mg/l Maximum
Sum of alkaline earth metals 3,76 mmol/l Maximum
Total hardness 21,4 °dH Maximum

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Show 4 more supply zones in this postcode

Versorgungsbereich 6 Elpersdorf

Fernwasserversorgung Franken (FWF)

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

These values are more than a year old. The most recent analysis the water supplier has published for this zone dates from 31/12/2019. We have no newer values — which is why we show the latest available ones rather than none at all. They say nothing about how the water has changed since then.

Water hardness
15.7 °dH
Hardness range hard
Key values Versorgungsbereich 6 Elpersdorf
Parameter Value Parametric value Share of the parametric value Reference
Nitrate 14,9 mg/l 50 mg/l
30 %
Mean
Sulphate 44,9 mg/l 250 mg/l
18 %
Mean
Sodium 16,0 mg/l 200 mg/l
8 %
Mean
Show all recorded parameters (13 — most recent value per parameter)

Chemical parameters (3)

Chemical parameters – Versorgungsbereich 6 Elpersdorf
Parameter Value Parametric value Share of the parametric value Reference
Fluoride 0,37 mg/l 1.5 mg/l
25 %
Mean
Nitrate 14,9 mg/l 50 mg/l
30 %
Mean
Uranium 0,0010 mg/l 10 µg/l
10 %
Mean

Indicator parameters (5)

Indicator parameters – Versorgungsbereich 6 Elpersdorf
Parameter Value Parametric value Share of the parametric value Reference
Chloride 29,3 mg/l 250 mg/l
12 %
Mean
Conductivity (25 °C) 604 µS/cm 2,790 µS/cm Mean
pH 7,7 6,5–9,5 Mean
Sodium 16,0 mg/l 200 mg/l
8 %
Mean
Sulphate 44,9 mg/l 250 mg/l
18 %
Mean

Further parameters (5)

Further parameters – Versorgungsbereich 6 Elpersdorf
Parameter Value Parametric value Share of the parametric value Reference
Calcium 70,0 mg/l Mean
Magnesium 25,6 mg/l Mean
Oxygen 9,5 mg/l Mean
Potassium 5,3 mg/l Mean
Total hardness 15,7 °dH Mean

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Source: https://www.fernwasser-franken.de/Unternehmen/Verbandsgebiet.html?location=oberdachstetten · Stand: 02/2020 · Jahresmittelwerte 2019 · retrieved on 14/07/2026

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

No core values are available for this zone yet.

Show all recorded parameters (1 — most recent value per parameter)

PFAS (1)

PFAS – Summe PFAS-20
Parameter Value Parametric value Share of the parametric value Reference
Perfluorooctanesulfonic acid (PFOS) 0,000001 mg/l Single value · Summe PFAS-20

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

No core values are available for this zone yet.

Show all recorded parameters (1 — most recent value per parameter)

PFAS (1)

PFAS – Summe PFAS-4
Parameter Value Parametric value Share of the parametric value Reference
Perfluorooctanesulfonic acid (PFOS) 0,000001 mg/l Single value · Summe PFAS-4

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Trihalogenmethane

Stadtwerke Schweinfurt

Assigned via the water supplier — the exact supply zone boundary within the postcode is not yet linked.

No core values are available for this zone yet.

Show all recorded parameters (1 — most recent value per parameter)

Chemical parameters (1)

Chemical parameters – Trihalogenmethane
Parameter Value Parametric value Share of the parametric value Reference
Trichloromethane (chloroform) 0,0005 mg/l Single value · Trihalogenmethane

Values taken unchanged from the publications linked below — for each parameter the most recent recorded value. „—" in the parametric value column: no currently valid legal parametric value is stored in our database for this parameter; the parameter register with all parametric values is being expanded continuously.

Frequent questions about postcode 97422

How hard is the water in Postcode 97422?
Stadtwerke Schweinfurt publishes a total hardness of 21.4 °dH for the supply zone Fassungsgebiet Wehranlagen Schweinfurt (hardness range 3). The hardness range is a classification under the German Detergents and Cleaning Products Act (soft below 8,4 °dH, medium 8,4 to 14 °dH, hard above that) and not a quality verdict — it indicates how much calcium and magnesium is dissolved in the water. Basis: 23.01.2026, retrieved on 11/07/2026.
How much nitrate is in the drinking water in Postcode 97422?
Stadtwerke Schweinfurt publishes a nitrate value of 17,3 mg/l for the supply zone Fassungsgebiet Wehranlagen Schweinfurt. The statutory parametric value is 50 mg/l; the measured value represents 35 % of the parametric value. Basis: 23.01.2026, retrieved on 11/07/2026.
Who supplies the drinking water in Postcode 97422?
Stadtwerke Schweinfurt. The values shown here come from the supply zone Fassungsgebiet Wehranlagen Schweinfurt and apply to the water the supplier delivers. What happens between the building connection and the tap — in old lead pipes, for example — is not covered by these analyses; information on that is provided by owners, the health authority or an examination by an accredited laboratory.

General questions — how current the data is, limit of quantification, parametric values, who is behind this site — are answered under Questions & answers.